Halfamazing
06-14-2015, 04:46 PM
I'm moving on from the SR on to something different. With that said it is time to sell all I have collected. I recently rebuilt my old motor but was getting some piston slap. The cylinder walls are in decent shape but I would bore it .20 over and throw in some 86.5mm pistons since it is on the larger scope of clearance for 86mm stock pistons.
Shipping and PP fees are not included and buyer is responsible to pay.
Please do not low ball me. I'm all for fair offers , but I really do not need to sell any of this. Sales will fund my next swap. With that said, I am not over a barrel so be cool. Also I do work a full time job , so be patient.
SOLD $300 S14 sr20det block : Was hot tanked / decked/ and honed for reuse of stock pistons. Was used for literally 3 miles and removed and torn down. I recommend having it bored .20 over and using 86.5 mm pistons. This is for a bare block with caps and girdle.
http://imagizer.imageshack.us/v2/640x480q90/537/cHsDQO.jpg
http://imagizer.imageshack.us/v2/640x480q90/538/DcfOAX.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/xZ6yBR.jpg
SOLD$160 Sr20det crank shaft used in stock rebuild. All journals in excellent condition.
http://imagizer.imageshack.us/v2/640x480q90/901/zJSkqQ.jpg
$100 Stock Pistons and rods http://imagizer.imageshack.us/v2/640x480q90/540/x51qoH.jpg
$50 S14 sr20det Tomei MLS head gasket. Used 3 miles
$200 S14 sr20det upper and lower intake manifold and TB. Has been polished. in good condition , comes with TPS, and IACV but its the plastic screw type and its stripped.
http://imagizer.imageshack.us/v2/640x480q90/538/LV89DZ.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/l36jvG.jpg
http://imagizer.imageshack.us/v2/640x480q90/661/rnh3t8.jpg
http://imagizer.imageshack.us/v2/640x480q90/910/gbqSAW.jpg
SOLDS14 sr20det Valve cover
Valve cover $130
http://imagizer.imageshack.us/v2/640x480q90/901/Mkz6tv.jpg
http://imagizer.imageshack.us/v2/640x480q90/537/7dwBLp.jpg
http://imagizer.imageshack.us/v2/640x480q90/661/qemkTD.jpg
http://imagizer.imageshack.us/v2/640x480q90/633/0JnLVy.jpg
http://imagizer.imageshack.us/v2/640x480q90/910/hFLFDI.jpg
*Taking offers: $2500 Built s14 sr20det. I purchased the short block off a member here a while ago. Bought the head off another member.
Weisco pistons 86.5mm 9:1
Manley rods
acl bearings
arp main and Head studs
tomei MLS
Greddy Oil pan
Head ported and Polished
Supertech dual valve springs and retainers
This motor is getting blowby and needs rings. Still runs though.
http://imagizer.imageshack.us/v2/640x480q90/903/lxIt1A.jpg
$325 Sr20det Manley H beam Rods. Brand new only opened box to look at them. http://imagizer.imageshack.us/v2/640x480q90/661/HlBcdj.jpg
SOLD : S14 sr water neck, catch can and lines, twinscroll turbo setup, down pipe, turbo intake, greddy oil pan x2, splitfire coils, sanded down s14 sr VC, ACT clutch kit, Power FC, Sard injectors, ARP head studs.
I have more stuff , more like odds and ends such as alternator, fan clutch , stuff like that but I'm not really interested in selling until the large items move.
Shipping and PP fees are not included and buyer is responsible to pay.
Please do not low ball me. I'm all for fair offers , but I really do not need to sell any of this. Sales will fund my next swap. With that said, I am not over a barrel so be cool. Also I do work a full time job , so be patient.
SOLD $300 S14 sr20det block : Was hot tanked / decked/ and honed for reuse of stock pistons. Was used for literally 3 miles and removed and torn down. I recommend having it bored .20 over and using 86.5 mm pistons. This is for a bare block with caps and girdle.
http://imagizer.imageshack.us/v2/640x480q90/537/cHsDQO.jpg
http://imagizer.imageshack.us/v2/640x480q90/538/DcfOAX.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/xZ6yBR.jpg
SOLD$160 Sr20det crank shaft used in stock rebuild. All journals in excellent condition.
http://imagizer.imageshack.us/v2/640x480q90/901/zJSkqQ.jpg
$100 Stock Pistons and rods http://imagizer.imageshack.us/v2/640x480q90/540/x51qoH.jpg
$50 S14 sr20det Tomei MLS head gasket. Used 3 miles
$200 S14 sr20det upper and lower intake manifold and TB. Has been polished. in good condition , comes with TPS, and IACV but its the plastic screw type and its stripped.
http://imagizer.imageshack.us/v2/640x480q90/538/LV89DZ.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/l36jvG.jpg
http://imagizer.imageshack.us/v2/640x480q90/661/rnh3t8.jpg
http://imagizer.imageshack.us/v2/640x480q90/910/gbqSAW.jpg
SOLDS14 sr20det Valve cover
Valve cover $130
http://imagizer.imageshack.us/v2/640x480q90/901/Mkz6tv.jpg
http://imagizer.imageshack.us/v2/640x480q90/537/7dwBLp.jpg
http://imagizer.imageshack.us/v2/640x480q90/661/qemkTD.jpg
http://imagizer.imageshack.us/v2/640x480q90/633/0JnLVy.jpg
http://imagizer.imageshack.us/v2/640x480q90/910/hFLFDI.jpg
*Taking offers: $2500 Built s14 sr20det. I purchased the short block off a member here a while ago. Bought the head off another member.
Weisco pistons 86.5mm 9:1
Manley rods
acl bearings
arp main and Head studs
tomei MLS
Greddy Oil pan
Head ported and Polished
Supertech dual valve springs and retainers
This motor is getting blowby and needs rings. Still runs though.
http://imagizer.imageshack.us/v2/640x480q90/903/lxIt1A.jpg
$325 Sr20det Manley H beam Rods. Brand new only opened box to look at them. http://imagizer.imageshack.us/v2/640x480q90/661/HlBcdj.jpg
SOLD : S14 sr water neck, catch can and lines, twinscroll turbo setup, down pipe, turbo intake, greddy oil pan x2, splitfire coils, sanded down s14 sr VC, ACT clutch kit, Power FC, Sard injectors, ARP head studs.
I have more stuff , more like odds and ends such as alternator, fan clutch , stuff like that but I'm not really interested in selling until the large items move.