racepar1
06-04-2015, 11:29 PM
2 S13 SOHC distributors
These are good working condition S13 SOHC distributors. Both came out of running cars with no issues.
$30ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2744_zpsb425e54a.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2840_zpsokq2rkhm.jpg
KA24E fuel injectors
These are 7 KA24E (sohc) fuel injectors. All 7 test good electrically and came off good running engines.
$20ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2745_zps0da9ec43.jpg
SOHC power steering tensioner
This is a good condition SOHC power steering belt tensioner. The pulley is undamaged, the bearing is nice and smooth, and the adjuster works perfectly.
$15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2842_zpscozgyhsz.jpg
SOHC water pump pulley
This is a good condition SOHC water pump pulley, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2852_zps8mpfa8of.jpg
SOHC fan/clutch
This is a SOHC complete clutch fan. The fan blades have very minimal cracking and the clutch is still good. It's just a little dirty.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2849_zps8n4f6wwr.jpg
SOHC exhaust mani w/heatshield
This is a good condition SOHC exhaust mani with the heat shield. No cracks or damage of any kind and the mani does not have any bolts broken off in it or broken studs.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2848_zps4q6gv4xi.jpg
SOHC distributor cover
This is the cover that goes over the distributor on a SOHC KA. You hardly ever see these still on the cars and it adds a bit of a cleaner look to the plug wires. I have two of these...
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2846_zpsge2dm25u.jpg
SOHC crank pulley
Good condition, no damage, not rusty.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2847_zpsu1hqacmt.jpg
SOHC ignition coil
This is a SOHC ignition coil with the bracket and WITHOUT the igniter. Came off a running/driving car, no issues. I also have another with the ignitor for $20.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2844_zpsrij893c1.jpg
SOHC MAF sensor
This is a good, working SOHC MAF sensor with a 3 pin connector. Came off a 100% running/driving car, 100% FOR SURE good. I will clean the MAF element before pick-up/shipping with MAF sensor cleaner.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2845_zpsu1vxufgr.jpg
2 SOHC M/T ECU's
This is an ecu for SOHC, M/T, CA emissions. I have 2 of these. 100% for sure good, came off running cars.
$25
One SOLD, One Left
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2843_zps6mjprhtm.jpg
SOHC plug wire set
This is a used, but recently replaced, complete set of SOHC plug wires. The wires are good quality, no loose boots, no pulled out connectors.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2838_zpsqp5uwxc8.jpg
SOHC NGK plug wire set
This is a full set of NGK wires for a SOHC KA. The wires are in good condition, no misfires, corrosion, or damage.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2936_zpsg1ztwu5z.jpg
SOHC intake air temp sensor
This is a good working condition SOHC air temp sensor. It mounts in the airbox on SOHC cars.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2841_zpsdtrrco7k.jpg
SOHC P/S lines
This is a complete set of S13 SOHC P/S lines. The pressure hose was replaced about 2 years ago. No leaks, no damage, just dirty from a leaky engine.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2938_zpssqhq9wyj.jpg
S13 stock downpipe
This is the stock downpipe from a SOHC KA, but will work on DOHC as well. No damage, the heat shield was removed because it was rattling.
$15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2937_zpsuelrt4fr.jpg
SOHC complete intake mani/sensors
This is a complete intake mani assembly with all the sensors. I am parting this out so PM me with what you need and we can work out a price.
$offer$
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2850_zpsmiwbkiav.jpg
SOHC engine partout
This is a mostly complete SOHC engine. The engine ran great when removed, passed smog no problem, but has 283k on it and was burning oil. The TPS was recently replaced with a new OE unit. The engine is SUPER clean inside, all maintenance done, synthetic oil only. The wiring harness is there, but the ECU, intake, and crank pulley are listed in a separate thread as they are aftermarket. It would be a good candidate if you planned on building it. PM me with what you need and we can work out a price from there.
$offer$
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2939_zpsdlnkujf6.jpg
These are good working condition S13 SOHC distributors. Both came out of running cars with no issues.
$30ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2744_zpsb425e54a.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2840_zpsokq2rkhm.jpg
KA24E fuel injectors
These are 7 KA24E (sohc) fuel injectors. All 7 test good electrically and came off good running engines.
$20ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2745_zps0da9ec43.jpg
SOHC power steering tensioner
This is a good condition SOHC power steering belt tensioner. The pulley is undamaged, the bearing is nice and smooth, and the adjuster works perfectly.
$15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2842_zpscozgyhsz.jpg
SOHC water pump pulley
This is a good condition SOHC water pump pulley, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2852_zps8mpfa8of.jpg
SOHC fan/clutch
This is a SOHC complete clutch fan. The fan blades have very minimal cracking and the clutch is still good. It's just a little dirty.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2849_zps8n4f6wwr.jpg
SOHC exhaust mani w/heatshield
This is a good condition SOHC exhaust mani with the heat shield. No cracks or damage of any kind and the mani does not have any bolts broken off in it or broken studs.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2848_zps4q6gv4xi.jpg
SOHC distributor cover
This is the cover that goes over the distributor on a SOHC KA. You hardly ever see these still on the cars and it adds a bit of a cleaner look to the plug wires. I have two of these...
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2846_zpsge2dm25u.jpg
SOHC crank pulley
Good condition, no damage, not rusty.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2847_zpsu1hqacmt.jpg
SOHC ignition coil
This is a SOHC ignition coil with the bracket and WITHOUT the igniter. Came off a running/driving car, no issues. I also have another with the ignitor for $20.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2844_zpsrij893c1.jpg
SOHC MAF sensor
This is a good, working SOHC MAF sensor with a 3 pin connector. Came off a 100% running/driving car, 100% FOR SURE good. I will clean the MAF element before pick-up/shipping with MAF sensor cleaner.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2845_zpsu1vxufgr.jpg
2 SOHC M/T ECU's
This is an ecu for SOHC, M/T, CA emissions. I have 2 of these. 100% for sure good, came off running cars.
$25
One SOLD, One Left
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2843_zps6mjprhtm.jpg
SOHC plug wire set
This is a used, but recently replaced, complete set of SOHC plug wires. The wires are good quality, no loose boots, no pulled out connectors.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2838_zpsqp5uwxc8.jpg
SOHC NGK plug wire set
This is a full set of NGK wires for a SOHC KA. The wires are in good condition, no misfires, corrosion, or damage.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2936_zpsg1ztwu5z.jpg
SOHC intake air temp sensor
This is a good working condition SOHC air temp sensor. It mounts in the airbox on SOHC cars.
$10
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2841_zpsdtrrco7k.jpg
SOHC P/S lines
This is a complete set of S13 SOHC P/S lines. The pressure hose was replaced about 2 years ago. No leaks, no damage, just dirty from a leaky engine.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2938_zpssqhq9wyj.jpg
S13 stock downpipe
This is the stock downpipe from a SOHC KA, but will work on DOHC as well. No damage, the heat shield was removed because it was rattling.
$15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2937_zpsuelrt4fr.jpg
SOHC complete intake mani/sensors
This is a complete intake mani assembly with all the sensors. I am parting this out so PM me with what you need and we can work out a price.
$offer$
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2850_zpsmiwbkiav.jpg
SOHC engine partout
This is a mostly complete SOHC engine. The engine ran great when removed, passed smog no problem, but has 283k on it and was burning oil. The TPS was recently replaced with a new OE unit. The engine is SUPER clean inside, all maintenance done, synthetic oil only. The wiring harness is there, but the ECU, intake, and crank pulley are listed in a separate thread as they are aftermarket. It would be a good candidate if you planned on building it. PM me with what you need and we can work out a price from there.
$offer$
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2939_zpsdlnkujf6.jpg