Maybe Someone Here Has These Stock S13 Parts?

[Nessaholiclover1]

Need these parts, that's why I'm always going to the junkyard trying to find many little pieces (Im OCD like that)

Please note: parts needed for s13 hatcback

- (purchased) S13 black shifter bezel (with all clips intact and shift pattern label)
- (purchased) s13 oem hatch trunk shocks, mine just busted yesterday, not too sure which aftermarket brand is better than oem
- s13 oem black retainer clips, the ones that go inside the hatch trunk, they seem like plugs (all three sizes would be cool)
- s13 retainer clips (the ones that are secured using a Phillips screwdriver type, these clips can be found either on the rear bumper lower retainer bracket (long total of 5) or in the front bumper on the bottom portion below the horns and below the front bumper support bar, there is a total of 4. I need two
- s13 front hood insulator piece w/clips (not torn or ripped)
- s13 front hood sealant with clips (it's the one that goes on the most up front part of the hood)
- s14 oem JDM grey strut bar with Nissan logo on it
- (purchased) s13 fan shroud for sohc engine (complete top and bottom portion)
- s13 under engine splash cover (it's a big square piece). Not too sure whats it called
- Canada Domestic/Japanese domestic s13 foglight switch and harness if possible
- (purchased) s13 oem shift boot and plastic ring/retainer
- s13 trunk lock cylinder and keys
- (purchased) s13 black oem rear bumper and foam
- s13 Armrest cover leveler button (the armrest cover has two button that helps it to stay leveled when closed, I need one. I don't need the cover, so if you would part that little miniature piece sell it to me, has to he in good conditions)
- (purchased) s13 JDM/Canadian Domestic headliner w/sunroof cutoff
- s13 oem black JDM/CDM carpet
- s13 Chuki/Sharknose front bumper to fender brackets (the brackets used to attach to the fender)
- s13 passenger wheel well/cowel cover small L-shape plastic cover
- s13 mint condition rear taillight black metal garnish panel (the long one that goes under the taillights)

Some of these parts I know I know are meaningless and to some they would not be worth even posting a WTB thread, but hey my car despite its age is really good looking (it's stock with JDM accents). Many people have tried to buy it off me or complimented it, that's why I want to keep the whole OEM stuff going. If you have these parts, send me a PM. Most of the easy USDM parts im not looking to cough off much for them, because They are common, but the real parts that are of worth is the Headliner, foglight switch maybe, carpet, etc. And as always thanks!!


Help this black beauty be perfect!!!!

http://i1165.photobucket.com/albums/q594/maryjaneguerrero84/D873694D-02F0-4445-85A0-87C9DD4BC7B9.jpg (http://s1165.photobucket.com/user/maryjaneguerrero84/media/D873694D-02F0-4445-85A0-87C9DD4BC7B9.jpg.html)

[s14boy]

i have a clean lower tail light "garnish panel" it is red not black. if you are interested pm or text me. numbers 847-323-7159

[Nessaholiclover1]

i have a clean lower tail light "garnish panel" it is red not black. if you are interested pm or text me. numbers 847-323-7159

Thanks, I have to pass, it must be black

[KiLLeR2001]

A lot of these parts can still be bought brand new from dealership, for example the lower garnish for S13 hatchback... http://www.courtesyparts.com/shield-sig-p-455300.html

[KiLLeR2001]

Under engine splash cover... http://www.courtesyparts.com/cover-engi-p-411153.html

[Nessaholiclover1]

A lot of these parts can still be bought brand new from dealership, for example the lower garnish for S13 hatchback... http://www.courtesyparts.com/shield-sig-p-455300.html

You are correct, however for said part I am planning to go back to Kouki taillights. But for the time being, I don't like the current state of my lower garnish. As for the others parts some I don't want to pay that much for them.

[Nessaholiclover1]

Under engine splash cover... http://www.courtesyparts.com/cover-engi-p-411153.html

The engine cover I did not know so thanks for that. I'll keep that one in mind

[Nessaholiclover1]

A lot of these parts can still be bought brand new from dealership, for example the lower garnish for S13 hatchback... http://www.courtesyparts.com/shield-sig-p-455300.html

For the shift boot, I ordered a new one for my friend and two things I hated, one was that the material was not the same color/fabric and two the plastic trim was not the same color. Yeah my OCD is that serious =\

[KiLLeR2001]

For the shift boot, I ordered a new one for my friend and two things I hated, one was that the material was not the same color/fabric and two the plastic trim was not the same color. Yeah my OCD is that serious =\


http://www.courtesyparts.com/boot-conso-p-503835.html

OEM S13 shift boot.

[KiLLeR2001]

- s13 front hood sealant with clips (it's the one that goes on the most up front part of the hood)

http://www.courtesyparts.com/rubber-sea-p-389523.html

[KiLLeR2001]

If you are OCD like me, paying this kind of money for brand new OEM parts should be the least of your worries.


- s13 Chuki/Sharknose front bumper to fender brackets (the brackets used to attach to the fender)

RH: http://www.courtesyparts.com/retainer-f-p-383518.html
LH: http://www.courtesyparts.com/retainer-f-p-383522.html

[Nessaholiclover1]

http://www.courtesyparts.com/rubber-sea-p-389523.html

Lol, okay okay Killer2001, I get it. I know of these parts haha, I'm starting to think you work for them and are getting a cut from sales lol Jk. For the time being I will wait for people to see if they have these parts, I would rather pay $20 for an engine splash cover than $96 brand new (figuratively speaking) and so forth. If no one bites, then eithe I will continue being patient and wait out for junkyards or buy brand new from the dealership.

[Nessaholiclover1]

If you are OCD like me, paying this kind of money for brand new OEM parts should be the least of your worries.



RH: http://www.courtesyparts.com/retainer-f-p-383518.html
LH: http://www.courtesyparts.com/retainer-f-p-383522.html

Yeah I know, so I know I have to pay up, but some sellers are cool. Believe me man, I bought three sets of oem cupholders, one for $150, the other for $200, and the last one for $20. And the twenty dollar one was the best looking one, the seller just didnt care for its value. Some sellers are cool

[rawgarage]

Has OCD about part condition but won't spend money to have new....smh

[Nessaholiclover1]

Has OCD about part condition but won't spend money to have new....smh

Omg RawGarage, how does your comment help my WTB thread? You shouldn't even post anything, you have contributed nothing. Keep it to urself if you are not selling something. Move on ignore my thread, but seriously how are you providing a part for sale to me? I know I'm a complicated customer and if you don't like my thread, post your rules on the WTB forum rules. If I messed up, leave it to the mods. I want something, I've explained myself as much as needed. I would have thought that posting more than 1500 posts would have taught you when to keep your comments to yourself and when not to. Where on my WTB thread do you read that I want new parts? I'm not planning on having a showroom car, like I said move on!

[TonyCG_7799]

- S13 black shifter bezel (with all clips intact and shift pattern label)
- s13 front hood insulator piece w/clips (not torn or ripped)
- s13 front hood sealant with clips (it's the one that goes on the most up front part of the hood)

im pretty sure i have those^ text me 872-240-1991

[MiSuNdErStOoD]

I have a new sohc fan shroud from Nissan. Still has the nissan part number sticker on it. If u wanna ship from fl text me 3863374369

[koukisteven]

S13 rear bumper and foam
S13 under tail light piece
Both in black! 951 4 8 6 1143

[kruked]

Do you want just a hatch lock cylinder and key, or a complete matching set? I have a complete key cylinder set w/ a key for a $100 shipped if interested.

[90S13dude]

I have sohc fan shroud

[Nessaholiclover1]

Do you want just a hatch lock cylinder and key, or a complete matching set? I have a complete key cylinder set w/ a key for a $100 shipped if interested.

I'm confused by what you asked, what's the difference between both?

[SidewaysS13ka]

i got a set of oem hatch shocks. they are sitting on the floor of my apartment along with my hatch. ill sell the shocks, but the hatch is going to stay with me until i get another 240. pm and we can work something out. i also have a set of flip up metal lids for sale and one chuki bumper extension in pearl white. let me know

[kruked]

I'm confused by what you asked, what's the difference between both?

Do you want just the hatch key cylinder and a key for it?

Or do you want an ignition, both doors, glove box and hatch key cylinders...w/ a key? Everything matches. For $100 shipped.

[Nessaholiclover1]

Do you want just the hatch key cylinder and a key for it?

Or do you want an ignition, both doors, glove box and hatch key cylinders...w/ a key? Everything matches. For $100 shipped.

Gotcha, no I just need the trunk cylinder with a matching key. I do not need the whole set of glovebox, ignition, door cylinders.

[Nessaholiclover1]

Bump purchased some parts!! Still patiently looking for the other parts, purchased parts updated, thanks!!

[Nessaholiclover1]

Bump, really just looking for a foglight switch and the under engine splash cover. Bought all the main parts.

[KiLLeR2001]

Fog light switch you say?

Nissan Part #: 25370-35F00

[Nessaholiclover1]

Fog light switch you say?

Nissan Part #: 25370-35F00

That's not the one I want, that one would have to replace my cruise control option /: which I still want to keep. The one I want is rectangular and it would replace the blank button next to the wiper washer/defroster switch on the right of the steering wheel. Or the one I want replaces the Overdrive button on automatic 240's

[KiLLeR2001]

You must be talking about the JDM 180sx optional fog light switch. There might be other similar Nissan switches that are rectangular but there was never one created like that for the 240sx.

[Nessaholiclover1]

You must be talking about the JDM 180sx optional fog light switch. There might be other similar Nissan switches that are rectangular but there was never one created like that for the 240sx.

Yes that's exactly the one I am speaking of, that's why I posted "Canada domestic/Japanese domestic s13 foglight switch with harness please". Lol, but thanks, I appreciate the input and attempt to help buy my parts.

[Nessaholiclover1]

C'mon help complete this black beauty

[Nessaholiclover1]

Bump still looking for these parts, please look at my parts for updated purchased parts. JDM/CDM rectangular foglight switch is very important though!! Thanks