PDA

View Full Version : Sr20det running on 1 cylinder


Sr20probs
05-21-2015, 07:53 PM
My sr has spark to all cylinders. It is only firing then running on 1 cylinder. Timing is good. It has a ka maf lol. Any ideas what it could be? I have yet to compression test it and I have to check the other injectors other than that I'm out of ideas. Please help

cotbu
05-22-2015, 11:27 AM
You can't time an engine running on 1 cylinder. Mechanical might be correct, ignition is not!
If you have spark, then the next thing to check is fuel! simple test include listening to the injectors, and or removing the fuel rail and watching them spray.

if you find you have fuel, you should consider passing this of to a mechanic.
the sohc ka mafs works for certain sr20's.
so a ka mafs on an sr20det is moot, without knowing make models and years.

japslapsilvia
05-22-2015, 12:19 PM
http://zilvia.net/f/showthread.php?t=603815

Why did you post this twice?

Sr20probs
05-22-2015, 04:42 PM
I have fuel and spark

jscherf92
05-23-2015, 12:42 AM
Check those other injectors and compression on all four. You can rent compression tools at nearly any parts store and it takes maybe thirty minutes. You can't expect us to diagnose your problem if you haven't done the relevant testing...

Sr20probs
05-23-2015, 10:05 AM
I have compression 140 in all 4

Sr20probs
05-25-2015, 09:03 AM
It still won't run with spark fuel and 140 psi in all cylinders on a cold block. I'm not sure what's going on at the moment. Gonna mess with the timing a little more hopefully it will run. Thanks

arohrbacher
05-27-2015, 08:52 PM
I ran into the same problem with mine when I first swapped mine but I wasnt getting spark in all cylinders. It turned out the ecu pinouts were wrong

Sr20probs
05-28-2015, 04:55 AM
I ordered a new igniter chip hopefully it's the spark not being strong enough if not I'm gonna go with the CAS or ecu other than that I have no idea. Any ideas what else it could be?