FS/FT: Built RB26, Tomei piston, forge rods, ARP studs with ported heads.

[C-unit]

I am looking to sell/trade this set up. I am not in a rush to sell but will accept any reasonable offers.

Here are the spec:
Parts:
- Tomei 88mm piston
- Tomei oil restrictor
- Eagle connecting rods
- ARP rod bolts
- ARP head studs
- Jun 88 mm headgasket
- Jun crank collar
- ACL Race main bearings
- ACL rod main bearings
-

Block machining:
- Resurfaced
- Rebored and honed with torque plate
- Hot tanked
- Crank machined and polished
- Crankcollar pressed in
- All rotating assembly balanced
- Oil pan hot tanked
- Oil pump rebuilt

Head Machining:
- Decked and resurfaced
- Valve himmed and check for clearence
- Line honed for camshaft bucket
- Hot tanked and cleaned
- pressure tested each combustion chamber
- Grind for high lifted Cams
- Intake ported
- Exhaust ported
- 5 angle cut valves


Price for the set is is $5800USD plus freight charges from WA 98281. Engine is located in Vancouver BC and I can meet at Blaine WA. If you are around the Seattle area, I can do deliver for fuel money.

The engine is at the machine shop right now waiting for then rods to arrive for balancing and final assembly. If you are interested in this set up, feel free to ask any questions.

Parts I am looking for trade:
- R32 GTR coilover + cash (anything quality)
- Wheels (TE37, CE28, quality ones if you know what i mean)


http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152118_zps394cd16c.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152118_zps394cd16c.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_151932_zps59190cdc.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_151932_zps59190cdc.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_151708_zps864bd437.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_151708_zps864bd437.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152202_zps6c90c145.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152202_zps6c90c145.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152324_zps727bad53.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152324_zps727bad53.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152334_zps54ff3bea.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152334_zps54ff3bea.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152406_zps6d7b3d34.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152406_zps6d7b3d34.jpg.html)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/20140312_152844_zps35889c88.jpg (http://s214.photobucket.com/user/GenerisLabo/media/engine/20140312_152844_zps35889c88.jpg.html)

[C-unit]

bump bump bump

[[email protected]]

Bump for legit dream setup!!

[C-unit]

no body want this?

[rains14]

Very nice set up.
I have a N1 setup on my GT-R but if I was looking for a motor this would be something I would say Yes too GLWS.

[C-unit]

No trade right now. Wanna buy parts for my truck so feel free to make a reasonable offers.

[C-unit]

need this gone.

[C-unit]

Back up for sale.

[ghudson]

I'm interested in the head only but I know you most likely do not want to part out...