PDA

View Full Version : s13 wheel masters of zilvia help me

300zx91
05-13-2015, 01:15 PM
50mm overfenders in rear, Stock fenders in front. S14, 5 lug hubs, z32 brakes, and Megan coils.
Did a ton of searching but looking for the best wheel setup for drift! I absolutely want to avoid spacers (if possible) I was thinking a 17x10 or 17x12 in the rear 17x9 in front. Not sure what the best route is for function and cost. I want to keep tires on the cheaper side. I am open to removing the 50mm fenders but the original quarter panels are cut. Thanks in advance!

http://i51.photobucket.com/albums/f376/Fiream91/Mobile%20Uploads/FB_IMG_1431543396647.jpg (http://s51.photobucket.com/user/Fiream91/media/Mobile%20Uploads/FB_IMG_1431543396647.jpg.html)

1992 coupe lsx t-56
Under construction
derass
05-13-2015, 02:28 PM
I could never make a 17x9 work with knuckles, even with spacers resulting in an effective offset of -15, I was still hitting the tension rod at full lock. I would like to try a low offest 17x8 to gain some inboard clearance and still fit up to a 245 wide tire.
TheRealSy90
05-13-2015, 03:24 PM
I'm running a 17x10 +0 with 225 up front with larger steering angle and don't hit anything. 17x11 +0 in the rear with 50mm overs.
Also, Florida fail, there's a wheel fitment thread for a reason.
dizzariot
05-13-2015, 03:46 PM
Did a ton of searching.

You're a fucking liar and a typical Florida kid. Holy fuck.
derass
05-13-2015, 07:52 PM
I'm running a 17x10 +0 with 225 up front with larger steering angle and don't hit anything.

What kind of TCs and swaybar? Are the bumpstops still there or custom ones? I don't have any so that was my other solution, but I'd rather not sacrifice any angle.
300zx91
05-14-2015, 02:13 AM
Did a ton of searching.

You're a fucking liar and a typical Florida kid. Holy fuck.

Are you okay? How was work?
TheRealSy90
05-14-2015, 09:22 AM
What kind of TCs and swaybar? Are the bumpstops still there or custom ones? I don't have any so that was my other solution, but I'd rather not sacrifice any angle.

Voodoo13 tension arms, stock swaybar, +1.5" s13 lca's with no bump stops.
brndck
05-14-2015, 09:30 AM
Did a ton of searching.

You're a fucking liar and a typical Florida kid. Holy fuck.

+1. Op mega fail.
joshchewuhh
05-14-2015, 10:25 AM
50mm rear stock front. God that's horrendous. Whyyyyyyy
JM216S14
05-14-2015, 11:40 AM
50mm rear stock front. God that's horrendous. Whyyyyyyy

Becauseracecar :picardfp:
dizzariot
05-17-2015, 12:20 PM
50mm rear stock front. God that's horrendous. Whyyyyyyy

OP wants some bastardized quasi-Porsche look. Fuck FL strikes again.