S14TLo
05-12-2015, 11:37 AM
Please read the entire post before contacting.
Simply put, I'm no longer building my 240sx as I had planned to due to student loans. The motor is ready to ship, loaded on a pallet, for local pickup or shipped with your expense. The motor is capable of making 480whp safely, as it did with a GT30.76R when it was in the last car. (less then 1000 mi.) I had bought the motor, shipped, from the Zilvia user: SoCalDrifter.
I never had the chance to personally swap the motor into my car, meanwhile it has safely been wrapped/stored in my garage. The work completed is excellent and I am still hesitant to let all this potential go but shit happens.
Pictures:
http://poconos.craigslist.org/pts/4964215559.html
The Build:
S13 BlackTop SR20DET
Top End:
-Tomei 270/260 Solid Cams
-Tomei Solid Lifters
-Tomei RAS
-Mazworx Dual Guide Rocker Arm Mod
-Brand New Rocker Arms
-BC TI Duel Springs and Retainers
-BC TI Valve Keepers
-Supertech Valves (Intake & Exhaust) 1mm bigger
-Supertech Valve Stem Seals
-Supertech Valve Guides (Intake & Exhaust)
-Cosmetic 1.3mm Head Gasket
-ARP Head Studs
-NGK Spark Plugs
-Freshly Machined Head
Bottom End:
-CP Pistons 86.50mm 10.5
-Manley H Beam Rods
-ARP Main Studs
-Freshly Machined Block
Extras/Transmission:
-ACT 6 puck unsrung clutch
-Lightened Flywheel
-New Throw Out Bearing
-New Starter
-New Alternator
-Oil Catch Can
-Magnetic Oil Drain Plug
-Megan Racing Pulley Kit
-New Belts
-Drift Freaq Motor/Tranny Mounts
-Custom Painted White Valve Cover
-Full SR wiring harness
*Please Note:
This is only the long block with transmission. The following parts have previously been sold:
-Intake and Exhaust manifolds
-Fuel Setup (such as injectors/rails/filter)
-ECU
-Turbo
Price: $2900
Other than that, please contact me with serious offers only. No trades.
Thank you.
Contact:
Text - (570) 269 - 5750
or PM
Simply put, I'm no longer building my 240sx as I had planned to due to student loans. The motor is ready to ship, loaded on a pallet, for local pickup or shipped with your expense. The motor is capable of making 480whp safely, as it did with a GT30.76R when it was in the last car. (less then 1000 mi.) I had bought the motor, shipped, from the Zilvia user: SoCalDrifter.
I never had the chance to personally swap the motor into my car, meanwhile it has safely been wrapped/stored in my garage. The work completed is excellent and I am still hesitant to let all this potential go but shit happens.
Pictures:
http://poconos.craigslist.org/pts/4964215559.html
The Build:
S13 BlackTop SR20DET
Top End:
-Tomei 270/260 Solid Cams
-Tomei Solid Lifters
-Tomei RAS
-Mazworx Dual Guide Rocker Arm Mod
-Brand New Rocker Arms
-BC TI Duel Springs and Retainers
-BC TI Valve Keepers
-Supertech Valves (Intake & Exhaust) 1mm bigger
-Supertech Valve Stem Seals
-Supertech Valve Guides (Intake & Exhaust)
-Cosmetic 1.3mm Head Gasket
-ARP Head Studs
-NGK Spark Plugs
-Freshly Machined Head
Bottom End:
-CP Pistons 86.50mm 10.5
-Manley H Beam Rods
-ARP Main Studs
-Freshly Machined Block
Extras/Transmission:
-ACT 6 puck unsrung clutch
-Lightened Flywheel
-New Throw Out Bearing
-New Starter
-New Alternator
-Oil Catch Can
-Magnetic Oil Drain Plug
-Megan Racing Pulley Kit
-New Belts
-Drift Freaq Motor/Tranny Mounts
-Custom Painted White Valve Cover
-Full SR wiring harness
*Please Note:
This is only the long block with transmission. The following parts have previously been sold:
-Intake and Exhaust manifolds
-Fuel Setup (such as injectors/rails/filter)
-ECU
-Turbo
Price: $2900
Other than that, please contact me with serious offers only. No trades.
Thank you.
Contact:
Text - (570) 269 - 5750
or PM