PDA

View Full Version : CA 300ZX Ebrake Conversion / 1 1/16" Z32 BMC / Z32 Rear 5 Lug Hubs / Z32 Twin Turbo Axle

surly
05-10-2015, 08:51 PM
I'm located in Rancho Cucamonga/Fontana 91730 Area code, I can ship if needed. All parts were working when removed but as is. No trades needed, Thanks for looking!

300ZX Ebrake Conversion - $145 shipped

Includes all hardware and anchor bolts, springs, nuts, etc.
Pads have good meat on them, comes with 3ft of cut cable for splice method found here:
http://importnut.net/300zxbrakeswap-ebrake.htm

https://c1.staticflickr.com/9/8702/17323635929_e2f1557f8f_z.jpg

https://c4.staticflickr.com/8/7702/16889520713_11d5d1c3ed_z.jpg


OEM Nissan 300ZX 1 1/16" Brake Master Cylinder - $115 SOLD
-Has 3rd brake fitting, no modification needed
-S13 reservoir already swapped on

https://c4.staticflickr.com/8/7790/16887284974_4d780d5a34_z.jpg

https://c4.staticflickr.com/8/7710/17509625541_5473f9b314_z.jpg

https://c2.staticflickr.com/6/5331/17322032488_a0f855e6cd_z.jpg


Z32 Rear 5 Lug Hubs - $110 Shipped
-Bolt in 5 lug for S13/S14
-No play in bearings

https://c1.staticflickr.com/9/8749/17322344590_a280f8b948_z.jpg

https://c1.staticflickr.com/9/8861/17509706211_6a73305201_z.jpg


1990 300ZX Twin Turbo Drivers Side Axle - $350 SOLD
-Good condition, tight cv joints
-needed for Q45 s13/s14 swap

https://c2.staticflickr.com/6/5333/17509911525_ee578abcde_z.jpg

https://c4.staticflickr.com/8/7758/17509873325_2aaee13502_z.jpg

https://c1.staticflickr.com/9/8763/16887313344_f23ffe61a7_z.jpg
surly
05-11-2015, 10:20 AM
Shipping available!
Rays_240
05-11-2015, 05:09 PM
PMed you /msglength
Po_31
05-12-2015, 12:03 AM
Do you still have thee brake conversion
surly
05-12-2015, 01:33 PM
Do you still have thee brake conversion

Only if you aren't low balling lol
surly
05-13-2015, 11:14 AM
Ebrake and Hubs still available!
Po_31
05-13-2015, 04:02 PM
Only if you aren't low balling lol

pmd your paypal
surly
05-14-2015, 02:45 PM
5 lug hubs are still available!
Mcpot132
05-14-2015, 05:08 PM
Ebrake still available?
surly
05-15-2015, 04:02 PM
Just have the hubs available right now
surly
05-15-2015, 07:53 PM
pmd your paypal

Delete your messages your inbox is full
gersoncruz23
08-25-2015, 06:38 PM
I'm located in Rancho Cucamonga/Fontana 91730 Area code, I can ship if needed. All parts were working when removed but as is. No trades needed, Thanks for looking!

300ZX Ebrake Conversion - $145 shipped

Includes all hardware and anchor bolts, springs, nuts, etc.
Pads have good meat on them, comes with 3ft of cut cable for splice method found here:
http://importnut.net/300zxbrakeswap-ebrake.htm

https://c1.staticflickr.com/9/8702/17323635929_e2f1557f8f_z.jpg

https://c4.staticflickr.com/8/7702/16889520713_11d5d1c3ed_z.jpg


OEM Nissan 300ZX 1 1/16" Brake Master Cylinder - $115 SOLD
-Has 3rd brake fitting, no modification needed
-S13 reservoir already swapped on

https://c4.staticflickr.com/8/7790/16887284974_4d780d5a34_z.jpg

https://c4.staticflickr.com/8/7710/17509625541_5473f9b314_z.jpg

https://c2.staticflickr.com/6/5331/17322032488_a0f855e6cd_z.jpg


Z32 Rear 5 Lug Hubs - $110 Shipped
-Bolt in 5 lug for S13/S14
-No play in bearings

https://c1.staticflickr.com/9/8749/17322344590_a280f8b948_z.jpg

https://c1.staticflickr.com/9/8861/17509706211_6a73305201_z.jpg


1990 300ZX Twin Turbo Drivers Side Axle - $150 SOLD
-Good condition, tight cv joints
-needed for Q45 s13/s14 swap

https://c2.staticflickr.com/6/5333/17509911525_ee578abcde_z.jpg

https://c4.staticflickr.com/8/7758/17509873325_2aaee13502_z.jpg

https://c1.staticflickr.com/9/8763/16887313344_f23ffe61a7_z.jpg

do you still have the hubs?