defi water temp install

[Sil-Abc]

checked around but does anyone know how to install the defi water temp gauge on the SR? Apparently in the instructions it says that i need to connect it to the top radiator hose and cut the hose in half and place a sensor attachment (T shape). Well i dont kno where to get the sensor attachment cuz i checked around and no luck. How did you guys install yours? thanks!

Also where does it connect to as for the plug?

[skatanic28]

do you know the thread size on it?
http://www.nissport.com/catalog/product.asp?ProductCode=NS-2051&EquipmentType=Products
theres water temp sender adapters

[Mr. Badlose]

Another option is a $100 top blue radiator hose (Samco) with a bung for a water temp sending unit.

[Kid Zelda]

Another option is a $100 top blue radiator hose (Samco) with a bung for a water temp sending unit.
You mean the greddy top rad' hose.

[SirWarrior]

look on ebay for something like this
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7916138484&category=46100
there are whole bunch of them

[Mr. Badlose]

You mean the greddy top rad' hose.

No, I meant the Blitz. :)
They're probably the same thing.

I just realized the Samco doesn't have a bung.

[msaskin]

Go to a hardware store, get a 1/8 PT or NPT (i forget which the defi probe is) tap and proper drill bit, and drill/tap a hole in the water outlet (the piece off the drivers front of the block that goes to the upper rad hose).

~matt

[240trainee]

www.splparts.com Go to S13, then uncer hardware, the fittigns section. a Blue adonized fitting made for the application.