OEM 2004 accord sideskirts to fit 240sx

[twitchy]

I have a set of the oem honda accord 4 door skirts / rockerpanel covers installed on my 240, i mentioned this in a post a month back or so. They fit decent and look clean on the car. They ARENT the aero type, just basically flat and smooth. For my application the main issue was to protect the underside of the rockerpanel from salt and sand spray in the winter. I had to cut a few inches off the front to make them fit, and that section tucks into the moulding around the mudflap and is covered.

Ill have some pics up on thursday late afternoon if anyone is interested. Im taking them off, and installing a different type of skirt (2004 civic SIR)

the skirts are installed using stainless self tapping screws. Theyre painted black right now and can be touched up or repainted if you like. You can install them as i did or use some creativity and try something different if you want!

The install is not perfect ill remind you- they arent designed to fit on the 240 but since i cut and measured and installed them they look good, better than stock for sure, and they protect the rocker area underneath from eventual rust. I sprayed mine with rubberized undercoating first.

pics to follow, pm or reply if your interested. Ill also have another oem set coming up for sale soon, they arent cut and theyre silver. They will be a cheap alternative to the nissan skirts and discreetly improve looks while protecting the rockerpanel underneath

Twitchy

[Ghettokracker71]

Gotta get some pics up man:)

[YoungRookie]

Put up some pics, interested

[GDubbs]

im also curious to see how these look on a 240.

[twitchy]

sorry boys, pics are being delayed, my dad forgot the digital cam at work, should have the pics up by the weekend

twitch

[twitchy]

okay people

here are the pics

note the following-

-holes pre-drilled into rear wheelwell lip to attach at the back
-holes predrilled underneath to attach to the rockerpanel

you might want to cut the honda hardware off the rear section in order to make it sit more flush (note the small gap behind the door area)

Im in Canada, keep this in mind for shipping prices if interested

They are painted black, however you can easily re-paint them yourself or touch them up if your cars black (theres a chip in one place under the door)

you should have the factory nissan mudflap mouldings to make the front section install look clean, watch how its tucked underneath it


here are the pictures:
note the gap behind the door in this pic
http://www.imagestation.com/picture/sraid134/p6a2466daf1f6189187ccda93939064c2/f76e4309.jpg
you can see it better here...you could cut off the supports inside it at this point and it would sit more flush
http://www.imagestation.com/picture/sraid134/pf6d14e6277ff2aef44c95457f03587b9/f76e4240.jpg

note how its tucked into the moulding up front
http://www.imagestation.com/picture/sraid134/p02fe40e5beebec51a66b66de9b6187d9/f76e430f.jpg
and then
http://www.imagestation.com/picture/sraid134/p2c9a07bfeb24fa602081a9f42c22f626/f76e4316.jpg


reply to this post or PM me with offers, and I dont rip people off on shipping charges either

if your very interested, send an email to [email protected] and ill set something up

Ill have another set for sale soon too

thanks twitchy

[twitchy]

ooh one more
http://www.imagestation.com/picture/sraid134/pf9ae19948aea7eee536cbaf5a0a2b602/f76e431a.jpg

[mrmephistopheles]

:tweak: :goyou: