PDA

View Full Version : CA R32 GTR lsd diff, gtr axles, 5 lug hubs / free shipping

edmorl
04-18-2015, 09:42 AM
R32 gtr parts I have laying around, all prices include shipping anywhere in the USA

OEM LSD Diff from an R32 skyline GTR - 500$ shipped

Perfect upgrade to your s13/s14 for beefier axles. Similar to the installation of a q45 diff.

http://i70.photobucket.com/albums/i97/edmorl/C07F7B28-636A-4C52-B3F9-3F12ED3CB206_zpsgq5uk2p4.jpg (http://s70.photobucket.com/user/edmorl/media/C07F7B28-636A-4C52-B3F9-3F12ED3CB206_zpsgq5uk2p4.jpg.html)
http://i70.photobucket.com/albums/i97/edmorl/58EA3967-7791-4614-9B9A-9191F75DB2E1_zpsh81f9a70.jpg (http://s70.photobucket.com/user/edmorl/media/58EA3967-7791-4614-9B9A-9191F75DB2E1_zpsh81f9a70.jpg.html)

R32 gtr rear axles - 200$ shipped

http://i70.photobucket.com/albums/i97/edmorl/03F48E25-6C05-4A62-999C-3CD0C5064548_zpscd63bdli.jpg (http://s70.photobucket.com/user/edmorl/media/03F48E25-6C05-4A62-999C-3CD0C5064548_zpscd63bdli.jpg.html)
http://i70.photobucket.com/albums/i97/edmorl/7D5F8E2B-9A1D-4792-B5FF-D546E375D927_zpsdswhemyc.jpg (http://s70.photobucket.com/user/edmorl/media/7D5F8E2B-9A1D-4792-B5FF-D546E375D927_zpsdswhemyc.jpg.html)
http://i70.photobucket.com/albums/i97/edmorl/166BB082-D2EA-45EA-8FC4-1EAAFBFD8448_zpsewelkmzo.jpg (http://s70.photobucket.com/user/edmorl/media/166BB082-D2EA-45EA-8FC4-1EAAFBFD8448_zpsewelkmzo.jpg.html)

R32 gtr rear 5 bolt hubs. Same as z32tt and q45 - 150$ shipped

http://i70.photobucket.com/albums/i97/edmorl/2FCB757B-A855-4753-A342-02E424133509_zpswzu8xpvi.jpg (http://s70.photobucket.com/user/edmorl/media/2FCB757B-A855-4753-A342-02E424133509_zpswzu8xpvi.jpg.html)
abe2branscome
04-18-2015, 10:16 AM
Do you happen to know the gear ratio on the diff?
edmorl
04-18-2015, 02:35 PM
Do you happen to know the gear ratio on the diff?


Standard r32 gtr, 4.1 I believe
Zed Nismo
04-19-2015, 12:02 AM
Just fyi for everybody, this R32 GTR setup is a direct bolt on for the s13. I'm not sure for the s14 but I can vouch for the s13, as I have this same setup on mine. Gear ratio is 4.11s and also if this is like mine then I can bet it is a 2-way clutch type!

All you have to do to install this diff, is use the GTR axles and hubs and swap the front flange from your old diff onto this one and also the rear diff cover (if you have an s13).
Again, I have this same setup on my s13 and have pictures incase anyone is interested.

Just thought to share the info incase someone was interested.
Also a free bump ;) GLWS OP
This is a great setup!!
edmorl
04-19-2015, 12:11 PM
Just fyi for everybody, this R32 GTR setup is a direct bolt on for the s13. I'm not sure for the s14 but I can vouch for the s13, as I have this same setup on mine. Gear ratio is 4.11s and also if this is like mine then I can bet it is a 2-way clutch type!

All you have to do to install this diff, is use the GTR axles and hubs and swap the front flange from your old diff onto this one and also the rear diff cover (if you have an s13).
Again, I have this same setup on my s13 and have pictures incase anyone is interested.

Just thought to share the info incase someone was interested.
Also a free bump ;) GLWS OP
This is a great setup!!

thanks for the heads up! I thought gtr axles would be too long to fit an s13
Zed Nismo
04-19-2015, 05:33 PM
No, actually R32 GTR axles are smaller in length then the s13. But, the output shafts are a little bit longer due to the abs ring, so that makes up for the difference. I believe that's what it was.
Flashman
04-19-2015, 06:28 PM
r32 gtr lsd diffs are supposed to have 2 mounting tabs on the top for hicas or something aren't they?
amreboot
04-19-2015, 10:28 PM
Interested in axles, PMed.
edmorl
04-20-2015, 06:28 PM
all PMs replied.
edmorl
04-27-2015, 10:34 PM
Bump to the top
edmorl
05-12-2015, 06:36 AM
Up. Still have all of this
TheRealSy90
05-12-2015, 09:13 AM
Do the axles not fit into 4 lug s13 hubs?
edmorl
05-12-2015, 07:24 PM
Do the axles not fit into 4 lug s13 hubs?

No, you'll need z32 tt / r32 gtr / q45 hubs for these axles since they have bigger splines
TheRealSy90
05-13-2015, 03:56 PM
I'm wondering if there is any possible way to retain a 4x114.3 bolt pattern with a hub that will accept these axles. What about the 4 lug hubs off of a base model skyline sedan maybe?
edmorl
05-13-2015, 04:57 PM
I'm wondering if there is any possible way to retain a 4x114.3 bolt pattern with a hub that will accept these axles. What about the 4 lug hubs off of a base model skyline sedan maybe?

nah those are the same as s14 ans z32 n/a

you'd have to run 5 lug with these axles unfortunately, unless someone can chime in
s13 drifta
05-13-2015, 11:36 PM
R32 GTR axles are 31 spline and 240sx axles are 29 spline, no it will not work.
TheRealSy90
05-14-2015, 09:24 AM
R32 GTR axles are 31 spline and 240sx axles are 29 spline, no it will not work.

I know, that's why i was wondering if the non GTR 4 lug skylines had the same hubs or not. There's gotta be a 31 spline 4 lug hub off of something :(