SideSteppn
04-14-2015, 03:43 PM
All parts are located in Chantilly/South Riding Virginia area. I am willing to ship certain things at the buyers expense, just ask. All prices are OBO so offer up, worst I can say is no. I am switching over to JZ platform, so willing to trade for jz parts, stand alone setups etc. I have pictures of every part but did not want to flood the post with pictures, so just ask and I can message or email you what you need. Thanks!!
I made 400whp @18psi on a conservative tune with this turbo/engine/tune setup.
Parts:
•Garrett GT3071r-wg T28 flange, .50 a/r -.86 hotside and 4" inlet, practically brand new and zero shaft play. vibrant elbow welded on in order to work with bottom mount manifold-$1200 turbo alone. will make deal on setup as pictured
•garret t28 turbo,no shaft play mounted to cast iron sr20det manifold-$500
•(S14 sr20det head assembled -$700, stripped $300 with stock valves)or
•spare head (complete) minus valve cover, needs cleaning-$175
•completely cleaned head and ready to assemble $250
•Tomei 270degree ProCams-$280
•Manley ProSeries springs and Titanium retainers -$175
•Tomei cam gear to replace vtc-SOLD!
•Drilled jec 850cc injectors(bought new)-$300
•TAARKS lowmount powersteering relocation mount DOPE! -SOLD!
•OEM iACV for s14 sr20det-$125
•Stance waterpump pulley-SOLD!
•S13 sr20det waterpump -SOLD!
•Nistune Type3 board ALREADY INSTALLED into "zenki" s14 ecu, and tuned for current setup (with cable and software user code to retune ecu, any tuner can do it) - $475 ($480+shipping for all three components from Nistune, WITHOUT being installed into the ecu)
•WiringSpecialties s14 zenki sr20det INTO s13 chassis, engine harness -$300
•WiringSpecialties fuel injector harness-$40
•WiringSpecialties knock sensor harness-$40 ($340 if you buy all 3 harness's)
•sr20det coil pack harness-$30
•Isis tube v2 tube turbo manifold wrapped with "titanium fused header wrap", whatever that means, barely used-$150
•Garrett turbo actuator with 20psi
spring-$40
•Isis turbo lines- SOLD!
•S14 sr20det shortblock, forged internals-$800
•S13 sr20det shortblock, needs rebuilt, stock bore so good motor to build-$200
•IsIs s14 sr20det waterneck with temp gauge port/hole- SOLD!
•Tomei oil pan-SOLD!
•Tomei rocker stoppers $75
•Tomei coil pack cover (powdercoated w/silver vein)-SOLD!
•stock s14 sr20det valve cover -$100
"Highligter yellow s14 sr20det valve cover $135
•Highlighter yellow s13 sr20det valve cover -$135
•sr20det coil packs (8)-$200(4)-$100
•s13 and s14 dizzy -$100 a piece
•z32 maf $80
•Tomei Expreme turbo elbow $150
-t3/t4 Top mount turbo tube manifold w/external gate flange,never used- $200
-NISMO light weight flywheel, no hot spots! - $350 + $100 for 3 puck clutch
-CompClutch light weight flywheel, no hot spots - $200 (still in car) +$100 for single disc spring clutch
-sr20det downpipe/flexpipe - $150
-sr20det B&M shifter - $175
-Tomei oil cap -SOLD!
•CxRacing top mount manifold -SOLD!
THESE PARTS HAVE ONLY A FEW HUNDRED MILES ON THEM, IF THAT!!!
I know i am missing a bunch of stuff, but pictures are attached as well, just ask. ALL PARTS LOCATED IN CHANTILLY/SOUTH RIDING VIRGINIA. Willing to ship at buyers expense, within reason(part wise).
All quality parts, with about 5-6 days of LIGHT track use at summit point motorsports park last year. I suffered valvetrain issues (meaning typical rocker arm problems, nothing damaging to the head or cams), amongst other issues with the car itself, all year last year. The car barely got driven due to me being pissed off and deciding what i wanted to do with it. At 100DOD in December, the car got driven more than it did at prior events all year, until the last run of the day on main when the rod decided it wanted to bend a lil.
Yes the motor has a rod knock, however, it is a fully forged s14 sr20det that was decked, milled, as well as bored .020 over. Im sure that the motor is salvageable, i am just moving on, and not interested in rebuilding it. I also have a spare crankshaft for it, as well as receipts for the forged internals.
I have various other parts for sale, as well as a s13 sr20det that needs rebuilt. Im parting everything sr, so if its not listed, just ask. I have pictures of everything as well. Below are the parts i have, minus anything i forgot. If you do not see it listed, please message me because i probably have it.. Thanks for looking, and help me get this stuff gone! Everything is OBO
THANK YOU FOR LOOKING!!!!! private message me, or email me at [email protected]
I made 400whp @18psi on a conservative tune with this turbo/engine/tune setup.
Parts:
•Garrett GT3071r-wg T28 flange, .50 a/r -.86 hotside and 4" inlet, practically brand new and zero shaft play. vibrant elbow welded on in order to work with bottom mount manifold-$1200 turbo alone. will make deal on setup as pictured
•garret t28 turbo,no shaft play mounted to cast iron sr20det manifold-$500
•(S14 sr20det head assembled -$700, stripped $300 with stock valves)or
•spare head (complete) minus valve cover, needs cleaning-$175
•completely cleaned head and ready to assemble $250
•Tomei 270degree ProCams-$280
•Manley ProSeries springs and Titanium retainers -$175
•Tomei cam gear to replace vtc-SOLD!
•Drilled jec 850cc injectors(bought new)-$300
•TAARKS lowmount powersteering relocation mount DOPE! -SOLD!
•OEM iACV for s14 sr20det-$125
•Stance waterpump pulley-SOLD!
•S13 sr20det waterpump -SOLD!
•Nistune Type3 board ALREADY INSTALLED into "zenki" s14 ecu, and tuned for current setup (with cable and software user code to retune ecu, any tuner can do it) - $475 ($480+shipping for all three components from Nistune, WITHOUT being installed into the ecu)
•WiringSpecialties s14 zenki sr20det INTO s13 chassis, engine harness -$300
•WiringSpecialties fuel injector harness-$40
•WiringSpecialties knock sensor harness-$40 ($340 if you buy all 3 harness's)
•sr20det coil pack harness-$30
•Isis tube v2 tube turbo manifold wrapped with "titanium fused header wrap", whatever that means, barely used-$150
•Garrett turbo actuator with 20psi
spring-$40
•Isis turbo lines- SOLD!
•S14 sr20det shortblock, forged internals-$800
•S13 sr20det shortblock, needs rebuilt, stock bore so good motor to build-$200
•IsIs s14 sr20det waterneck with temp gauge port/hole- SOLD!
•Tomei oil pan-SOLD!
•Tomei rocker stoppers $75
•Tomei coil pack cover (powdercoated w/silver vein)-SOLD!
•stock s14 sr20det valve cover -$100
"Highligter yellow s14 sr20det valve cover $135
•Highlighter yellow s13 sr20det valve cover -$135
•sr20det coil packs (8)-$200(4)-$100
•s13 and s14 dizzy -$100 a piece
•z32 maf $80
•Tomei Expreme turbo elbow $150
-t3/t4 Top mount turbo tube manifold w/external gate flange,never used- $200
-NISMO light weight flywheel, no hot spots! - $350 + $100 for 3 puck clutch
-CompClutch light weight flywheel, no hot spots - $200 (still in car) +$100 for single disc spring clutch
-sr20det downpipe/flexpipe - $150
-sr20det B&M shifter - $175
-Tomei oil cap -SOLD!
•CxRacing top mount manifold -SOLD!
THESE PARTS HAVE ONLY A FEW HUNDRED MILES ON THEM, IF THAT!!!
I know i am missing a bunch of stuff, but pictures are attached as well, just ask. ALL PARTS LOCATED IN CHANTILLY/SOUTH RIDING VIRGINIA. Willing to ship at buyers expense, within reason(part wise).
All quality parts, with about 5-6 days of LIGHT track use at summit point motorsports park last year. I suffered valvetrain issues (meaning typical rocker arm problems, nothing damaging to the head or cams), amongst other issues with the car itself, all year last year. The car barely got driven due to me being pissed off and deciding what i wanted to do with it. At 100DOD in December, the car got driven more than it did at prior events all year, until the last run of the day on main when the rod decided it wanted to bend a lil.
Yes the motor has a rod knock, however, it is a fully forged s14 sr20det that was decked, milled, as well as bored .020 over. Im sure that the motor is salvageable, i am just moving on, and not interested in rebuilding it. I also have a spare crankshaft for it, as well as receipts for the forged internals.
I have various other parts for sale, as well as a s13 sr20det that needs rebuilt. Im parting everything sr, so if its not listed, just ask. I have pictures of everything as well. Below are the parts i have, minus anything i forgot. If you do not see it listed, please message me because i probably have it.. Thanks for looking, and help me get this stuff gone! Everything is OBO
THANK YOU FOR LOOKING!!!!! private message me, or email me at [email protected]