PDA

View Full Version : Starting Issue


Spach
04-10-2015, 07:43 PM
My car has been turning over and running fine for the past while. But now when I turn it over it will run for a spilt second and die, or just keep cranking. I've thought it was MAF but it seems it isn't and I've check to see if all plugs are all in which they are. I don't understand why it's doing this it worked just fine today if anyone has any advice would be appreciated! Thank you!

inferno s14
04-10-2015, 08:30 PM
Spark? Check dizzy plug or if it came loose And messed with your timing.

Spach
04-11-2015, 09:45 AM
Checking spark now I'll keep posting as I diagnos

Spach
04-11-2015, 12:45 PM
So I tried a buddy's maf and still wasn't firing as he left I tried starting it with no maf. I fired right up and was running not good but was running. I turned it off tried my maf and wasn't firing. But my maf and my buddy maf works in his car. So I'm not sure if it either my maf wiring which is getting volts or my timing/cas?

Spach
04-12-2015, 06:21 PM
So I found out the issue I was checking over everything it all had correct power so I checked fuel put of rail to FPR and had next to nothing, checked fuel going into rail had loads! So I took off fpr cleaned it up slapped it back on and she fired up strong! Thanks for all the help hope this post can give others help in the future!

angel mkiv
04-12-2015, 07:42 PM
If your fpr was clogged I would replace your fuel filter also and clean your injectors and part of preventive maintenance..

Spach
04-13-2015, 10:20 AM
I have a new fuel filter and new injectors never driven with them as of yet