high compression KADE build/swap in progress

[Andrew Bohan]

here it is
enjoy! (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/)

[AceInHole]

nice writeup! cant wait to see it go further!

[citizen]

plannin on running 11.2:1 on 91 octane?

[aznpoopy]

interesting pics... funny captions.

the rest of the website is hillarious... lol.

[Andrew Bohan]

plannin on running 11.2:1 on 91 octane?

why yes, yes i am.
i'll also have some toluene for special days
5 gallons of toluene + 10 gallons of 91 = 15 gallons of 97 octane in my tank w00t!

[Mr. Badlose]

Did you tell everyone how you have a full tank of 87 from before? HAHAHAHA!


c:\>ping andrews.highcomp.ka24de.ringland

destruction sent...
destruction sent...
destruction sent...


Just kidding buddy. It'll all work out fine (if the Lord Jesus Christ decides to show you mercy!) ph33r!!!11

[Andrew Bohan]

yeah i had only 30 miles off a full tank of 87 when the motor blew.
KONOYAFUCKINGROU!!

any bay area peeps wanna siphon my gas out at $1.00 a gallon?

[SlowCoupe]

kool site...keep us updated...

[Maeda]

Finally somebody has the funding to go through with a project like this. Good to see it.

[Mr. Badlose]

Finally somebody has the funding to go through with a project like this.

HAHAHAHAHAHAHAHAHAHAHAHA! (inside joke)

[Andrew Bohan]

funding?! bauahahahha i have like 10 bucks left in the bank.
i had to borrow 200 bucks from mr badlose just to make rent.
this project owns me.

[TRUENOCOUPE]

I was totally going to clown but I give you much respect building an N/A S13.

Goodluck with the project.

-Al

[Andrew Bohan]

gee al, that means a lot to me.
i didn't know anyone could get your respect :D
thanks

[Mr. Badlose]

Gee driftaholic, and I didn't think it was possible for anyone to respect YOU.

[TRUENOCOUPE]

gee al, that means a lot to me.
i didn't know anyone could get your respect :D
thanks

Its all Internet shits... You should know that. Most of the things I say here is all jokes to me.

Im going to build an N/A S13 in the future also.

Turbo is for wuss.

[Andrew Bohan]

Gee driftaholic, and I didn't think it was possible for anyone to respect YOU.

G T G O H

Its all Internet shits... You should know that. Most of the things I say here is all jokes to me.

Im going to build an N/A S13 in the future also.

Turbo is for wuss.

ya i know that :werd:

[Andrew Bohan]

days 8, 9, and 10 are now up!

here you go (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/day8.html)

[DuffMan]

oooooo peacocks

[Andrew Bohan]

i guess it was actually a peahen and some peachicks.

but yeah
there is a bunch of peafowl around my new place.

[Mr. Badlose]

You should become a member of an extremist militant Islamic faction if your new motor doesn't fire up! Neither that, or we'll finish up "SEPPUKU BY CAMSHAFT"!

[240meowth]

ha ha ha, god himself has dammed you!!!

[Andrew Bohan]

i was *this* close to drinking my 2 liter bottle of old tranny fluid.

[240meowth]

i was *this* close to drinking my 2 liter bottle of old tranny fluid.

used tranny fluid? 'cause i think used tranny fulid can kill, but new tranny fluid will just lub urself up for some... yah. when in doubt, drink the 87 octang in the fuel tank, than go out for a smoke. :rl:

p.s. props for doing the NAKA! it has been my dream, one day, ONE DAY, i will build it.

[aa87]

What kind of numbers are you expecting?

A local guy has a ka24e with a nismo cam or something, paceshitter header, injen intake, port and polish stock pistons and such, and he is claiming 300whp.

[Mr. Badlose]

The local guy reminds me of a guy I met in Tahoe who said that he could put $200 Ferrari "headers" on his Prelude.

[orion::S14]

Hey...the cam timing is off.

To use a '91 exhaust cam for an intake cam, you rotate it 4 teeth...

There should be exactly 8 links between the dots..you're at 7.5.

Just FYI. Here's (http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=67778031)a quick reference if you're unsure...but trust me, I've run that setup on 2 different KAs.

- Brian

[Prok0]

Sweet pics of the buildup process.

I started laughing soo hard when I got to the 8th page. LOL
I came across the same problem when rebuilding my KA, sitting there looking at the FSM and looking at my timing stuff and not having anything match up. that was a nightmare...

Cool article/pics though :boink:

[Andrew Bohan]

Hey...the cam timing is off.

To use a '91 exhaust cam for an intake cam, you rotate it 4 teeth...



thanks for the info. i had read it's 3 teeth, and it looked right when i compared it to the intake cam, but'll go look again if you're sure of it.

[Andrew Bohan]

UPDATED!!!
day 11 (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/day11.html) now up.

[Andrew Bohan]

omg day 12!! (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/day12.html)

[Andrew Bohan]

What kind of numbers are you expecting?

A local guy has a ka24e with a nismo cam or something, paceshitter header, injen intake, port and polish stock pistons and such, and he is claiming 300whp.

word around the campfire is that i'll be approaching 200 to the crank. who knows? i'm not gonna throw some bullshit numbers out there. i'll dyno it when it's all done, and then we'll see.

[that180guy]

dont forget the safc for a bit of tuning.....and get a exhaust manifold damnit!!!!!!!!!!

[ThatGuy]

Sad, you've almost completed you rebuild/upgrade Andrew, and I'm still not back to rebuilt/stock. :cry: :bowrofl:

[Pepperoni]

Lucky ... you've got so many people willing to help you out with the swap. It's lookin good...:) maybe ill eventually come by and check it out :D

[Andrew Bohan]

ahh i figured out why what i was going by had the cam rotated only 3 teeth. the other cam was rotated 1 tooth clockwise, so they were 4 teeth apart, just the chain was off by one tooth...

thanks orion, you prolly saved me a headache and a few hours of troubleshooting

[orion::S14]

Cool.

Make sure they're straight before you start that thing!

- Brian

[Drunk Bastard]

andrew, online FSM?

[Andrew Bohan]

i just gave it to you, you drunk bastard http://www.zeroyon.com/forum/images/smiles/Hydrogen.gif

but for those who want one, here: http://www.zeroyon.com/TheSite/techservice.html

[nightwalker]

driftaholic, ever thought about porting the throttle body and extrude honing the manifold?

[Andrew Bohan]

i thought about a lot of stuff. a six week swap when i told the lady who's house i'm doing it at it would be a week wasn't one of the things i thought of.
fun things will come when time and money permit.

say, that's a good quote

[TheSnail]

Turbo is for wuss.

Does Twin Turbo Count ?

[that180guy]

Lucky ... you've got so many people willing to help you out with the swap. It's lookin good...:) maybe ill eventually come by and check it out :D

same here ;)

[Andrew Bohan]

take out the "maybe" and the "eventually" and put "today" so come, bish

[RedSuns]

negative nancy scares me.....

[Andrew Bohan]

negative nancy scares me.....
he's coo

anyway, since it's the weekend, here are the updates (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/)

[JDMark]

haha your sites awesome, love the engrish. sweet writeup too, let us know when you get it started.

-mark

[SR240DET]

hmm did you set your timing !!!???!?? i wanna see it start!!!

[nightwalker]

dam you and your high compression KA build ups, now you got me debating ka-t and NA ka again.

[Andrew Bohan]

hmm did you set your timing !!!???!?? i wanna see it start!!!

timing? what's that?

[RedSuns]

he's coo

anyway, since it's the weekend, here are the updates (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/)


that is a he?!?!?!?!?!?!!?!!?



:mepoke:


scary....

[Andrew Bohan]

he's jake (http://guernsey.globat.com/~mountainracer.com/bullshit/jake/index.html) and he's jamaican

oh yeah, day 15 (http://guernsey.globat.com/~mountainracer.com/tunetech/ka_swap/day15.html)