Sterze46
04-08-2015, 05:51 PM
Hey guys,
Do too a recent move, I am unable to finish my drift project that I have started. So in order to free up some finances and space I am selling my entire unfinished LS1 FD project.
First up:
Complete Ronin/Samberg LS swap kit NEVER BEEN INSTALLED! $1750 8.8 Diff mounts ARE SOLD!!!
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0042_zpswn8dspng.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0042_zpswn8dspng.jpg.html)
This is a 100% complete kit!
- Front Subframe Powdercoated Black
- 2 engine to motor mount pedestals
- 2 biscuit vibration isolators
- trans mount for t-56
- 1 polyurethane transmission isolator.
- 8.8 Diff Mount (SOLD!!!)
- Bump Steer Kit
- All Hardware needed.
LS1 Shortblock, 100% stock, 160K Miles. Could definitely use a hot tank but I did hear it run before it was pulled. $500
Ported and Polished 243 Cathedral Heads. Machine work was done by Mission Critical Performance. Not sure of flow specs. $2000
I Have an 1993 FD Shell. Transmission, rear end, suspension, driveshaft, and catback exhaust still installed. Previous owner had it all sorts of colors, but supposedly no accidents on its clean title. Chassis has ~90K miles. $4500 obo. Sound deadening is mostly pulled except for a few pieces. I have all harnesses/interior panels/ aftermarket exterior. I have shine auto front fenders in FRP, shine auto FRP rear diffuser, as well as the stock hood, hatch, and front bumper. I also have a C-West front bumper for it as well. The paint on the exterior is not good. Its cracked in a lot of places and just seems like a cheap paint job. Otherwise solid shell. Also, comes with a set of RPF1's in 17x9 as well as the Apexi N1 Coilovers.
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0009_zpsnzizncqg.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0009_zpsnzizncqg.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0012_zpsp7vmu8lb.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0012_zpsp7vmu8lb.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0025_zpsodtnhmuu.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0025_zpsodtnhmuu.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/photo1_zps1e31dd62.jpg (http://s1201.photobucket.com/user/SterzREX/media/photo1_zps1e31dd62.jpg.html)
Looking for: Open to anything that is pretty much fully prepped to drift. I don't have time to finish my project, so I need something that is ready to go.
PM me hear or for a quicker response text your questions to 949-444-8747. Located in Costa Mesa!
Do too a recent move, I am unable to finish my drift project that I have started. So in order to free up some finances and space I am selling my entire unfinished LS1 FD project.
First up:
Complete Ronin/Samberg LS swap kit NEVER BEEN INSTALLED! $1750 8.8 Diff mounts ARE SOLD!!!
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0042_zpswn8dspng.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0042_zpswn8dspng.jpg.html)
This is a 100% complete kit!
- Front Subframe Powdercoated Black
- 2 engine to motor mount pedestals
- 2 biscuit vibration isolators
- trans mount for t-56
- 1 polyurethane transmission isolator.
- 8.8 Diff Mount (SOLD!!!)
- Bump Steer Kit
- All Hardware needed.
LS1 Shortblock, 100% stock, 160K Miles. Could definitely use a hot tank but I did hear it run before it was pulled. $500
Ported and Polished 243 Cathedral Heads. Machine work was done by Mission Critical Performance. Not sure of flow specs. $2000
I Have an 1993 FD Shell. Transmission, rear end, suspension, driveshaft, and catback exhaust still installed. Previous owner had it all sorts of colors, but supposedly no accidents on its clean title. Chassis has ~90K miles. $4500 obo. Sound deadening is mostly pulled except for a few pieces. I have all harnesses/interior panels/ aftermarket exterior. I have shine auto front fenders in FRP, shine auto FRP rear diffuser, as well as the stock hood, hatch, and front bumper. I also have a C-West front bumper for it as well. The paint on the exterior is not good. Its cracked in a lot of places and just seems like a cheap paint job. Otherwise solid shell. Also, comes with a set of RPF1's in 17x9 as well as the Apexi N1 Coilovers.
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0009_zpsnzizncqg.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0009_zpsnzizncqg.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0012_zpsp7vmu8lb.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0012_zpsp7vmu8lb.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/IMG_0025_zpsodtnhmuu.jpg (http://s1201.photobucket.com/user/SterzREX/media/IMG_0025_zpsodtnhmuu.jpg.html)
http://i1201.photobucket.com/albums/bb353/SterzREX/photo1_zps1e31dd62.jpg (http://s1201.photobucket.com/user/SterzREX/media/photo1_zps1e31dd62.jpg.html)
Looking for: Open to anything that is pretty much fully prepped to drift. I don't have time to finish my project, so I need something that is ready to go.
PM me hear or for a quicker response text your questions to 949-444-8747. Located in Costa Mesa!