WTB S13 dash connector pigtail

[Mildviolence]

I am in need of the dash connector for a s13 dohc (Hooks up to engine harness, next to ECU). really only need a the connector and pigtail. Will consider whole dash harness if you have it.

This is what connector will look like.

http://i409.photobucket.com/albums/pp175/07kyeringt/brownf1plug_zpshppzq0ca.jpg (http://s409.photobucket.com/user/07kyeringt/media/brownf1plug_zpshppzq0ca.jpg.html)

[kennn]

I have one.

[kruked]

$11 shipped. Male and female plugs.

[TwelveAM]

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

[kennn]

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

Without hacking up either the dash or engine harness, you need both connectors to make your own patch harness.

[kruked]

If my car was originally SOHC (two tone) and I swapped out the whole engine with a DOHC, do I need the SOHC (white one) or can I use the DOHC (brown one) on the SOHC dash harness?

Use the DOHC engine harness. Buy the female brown plug for the dash harness. De-pin the white plug, re-pin the brown plug.

There is plenty of information on the interwebs, and a few videos on YouTube for what wires are a must.

[jdm_rydaa]

Just wired mine up , I have an sohc car and put a dohc in it. I just cut the brown plug off the engine harness and wired the white one up to it , I have another white plug if you need it.


Sent from my iPhone using Tapatalk