Help reading this window switch schematic

[Frostedbutts]

Can anyone help me read this schematic? It's the window switch from an R32 Skyline GTR and I have never seen this type of layout for an electrical diagram. Up/N/Dn stands for which direction the switch is being held. There is supposed to be continuity between which pins when the switch is in the up/down position?

http://i.imgur.com/JPrLF6U.jpg

Window won't roll up and down and I'm suspecting the switch. Relay is good, motor and window roll up and down when power is applied directly to them, and the passenger window still works so it's not the fuse.

[dbeiler]

While manual up, you should have continuity from pin 3 to 4. In manual down, you should have continuity from pin 2 to 4.

[dbeiler]

If your switches really are bad and you're in a pinch, you can roll up the window by using a short piece of wire to jump pin 3 to pin 4 (in the connector on the chassis harness side, obviously)