S13 sohc and dohc, cleaning basement, all must be sold or trashed!

[andrave]

OK, first let me point out that I need badly a pair of s13 dohc cam brackets, I only need the front two, one for each cam, up by the timing chain. my engine didn't have them. I also need the 4 bolts that hold them in.

I also need an s13 dohc ignition coil.

I will trade anything on this list for them, or pay, or both.



Now, on to the for sale items:

For sale or parting out:

1989 sohc ka24E, runs good, smokes a little, 190k, includes harness, coil, ecu, intake, and mafs. No transmission. $100k would take all, or obo, pickup only, make offer on any parts, will ship the parts.

NEW ITEMS- new, never used:

(1) whiteline polyurethane TC rod bushing and metal insert. Only have ONE (as in half of a pair). $10

(2) 3/8 NPT to 10AN adaptors, steel $3

dohc front main seal, never used $5

dohc valve stem seals, new in bag $5

Used but usable items:

HKS bov pipe with weleded flange, 2.25" diameter, 3.5" long, cut at angle on one end $20 obo

1.5' of 10 AN stainless steel braided aeroquip line, includes one cut off straight end fitting that won't back off $10 obo

1.5' of 4 AN rubber coated braided stainless steel line of unknown manufacture with two steel straight hose ends $ 10 obo

s13 dohc gauge cluster in good condition with no tach or clear plastic cover $10 obo

dohc fuel rail including injectors and fuel pressure regulator $15 obo

s13 radio pocket, no brackets $ 10 obo

dohc AC flex line $5obo

dohc AC compressor $10 obo

(2) sohc ac compressors $5 each obo

set of 10 used dohc head bolts, no washers $ 5 obo

dohc EGR valve $1 obo

skyline GTR R32 turbo outlet/extension $15 obo

s13 sohc ignition coil, worked well when taken out $5 obo

stock s13 sohc clutch, pressure plate, and throwout bearing (clutch and pressure plate are fresh take off, worked very well, if previous owner was honest, have less than 15k on them). $15 obo

Used items, in poor condition, all are free plus shipping

Stock s13 dohc clutch, pressure plate, and throwout bearing (beat to ****, next to worthless, sat outside, rusty, etc).

overflow bottle with small hole

broken sohc tach with dohc face (needle broken)

valve cover gasket

dohc cruise control actuator with cable

4 bolt dohc idler puller

dohc fan clutch only, no fan

used dohc timing chain, upper, lower, cam gears, and guides

dohc swirl control valve

stock dohc s13 exhaust manifold, flange to cat was cut off by idiot friend with sawzall.


I will make deals on anything, if you want to low ball, thats fine. I will combine items for less if you want more than 1.

[email protected]

aim aandrave

msn andrave

yahoo andrave

or I will check this post regularly.

[ryan hagen]

what do you mean by cam brackets? like the chain guards or the cam tower caps? i can get the coil, and probally the cam things, interested in the valve stem seals, front main seal, wh omakes the valve seals? lmk

[andrave]

They were in a full gasket kit from "Apex gaskets." It was labeled as a premium gasket kit.
Right now someone is working on getting me the coil and caps, if that falls through I'll let you know.

[warpig2003]

hey man.... you happen to have this peice of the intake laying around?

http://img.photobucket.com/albums/v343/warpig2003/myka24eismissing.jpg

[zero.counter]

1989 sohc ka24E, runs good, smokes a little, 190k, includes harness, coil, ecu, intake, and mafs. No transmission. $100k would take all, or obo, pickup only, make offer on any parts, will ship the parts.

That's alot of money man... :fawkd: J/K
Do you still happen to have the engine's hoses, vacuum hoses, EGR system and fuel rail with injectors/FPR/ETC. in place?

[andrave]

war pig yes I have the entire stock intake, just make me an offer for what you need.

its a lot of money but its obo, and for 100 I'd include all the shit that you don't normally get, such as mafs, ecu, harness, etc....

I have most of that stuff, of course the fuel lines and brake booster hose and other assorted bits will be reused on my new engine so I can't sell them.

I have fuel rail, injectors, fpr, and EGR for both sohc and dohc, just email me with what you need.

[240Driver39]

its a lot of money but its obo, and for 100 I'd include all the shit that you don't normally get, such as mafs, ecu, harness, etc.....

haha, he was saying thats a lot of money as a joke, since u put $100k

[bobafett]

about your sohc clutch with 15k supposed miles on it, is it in good shape as far as clean and no rust etc? i think my clutch is on its way out, but i dont want to spend $$$ on a performance clutch since my car is stock lol... how much shipped to vancouver WA 98683 ??

im definetly interested in the clutch....

[andrave]

it gripped well and had a firm pedal but its hardly near new. It shows a decent bit of wear. parcel post (7 days to your zipcode) would cost around 26 dollars, according to usps.com. You can get a new one from advance auto or autozone for around 90 so that may be your best bet.

[andrave]

first and last bump, sorry, but anything not paid for by friday will be trashed. if you want something, just make an offer. If anyone wants to pick stuff up they are welcome to pretty much what they want, including some 16 215/50 or something firehawk gta's with half decent tread left.

[GDubbs]

i need that egr valve!

[Mustangs Suck]

Hey do you still have that front main seal? Will buy asap via paypal as mine just blew - zip code is 53151, let me know thanks!

[ryan hagen]

valve seals $10 shipped? thanks lmk