R33E8
03-22-2015, 08:12 AM
SOLD
I have a Precision 6466 with well under 1000 miles. It's in excellent condition, I've always ran it with an air filter and used a dedicated 10 micron XRP inline oil filter for the oil feed line.. I mainly just cruised the car with this turbo since it wasn't tuned so it's never seen real boost... Comes with a t3 .63 5-bolt exhaust housing and a ceramic coated 1.32 T4 divided housing! I will not seperate unless you only want the T3 housing.. The T4 housing was ran on a different turbo for about 5k or miles so it's a little dirtier.. should clean right up though... If you want to max out this turbo this T4 housing is what you need..
I'm asking $1550 shipped plus paypal fees.... Comes with everything shown but the -10 drain flange adapter. I can include the XRP -4AN to 1/8"NPT fitting for the oil feed and vacuum line fitting shown if you want.. Text me 609 four five six 9773 for the fastest response..
I wouldn't mind trading for some wheels + cash or + cash on my end. 18" or 19" square setup..
http://realstreetperformance.com/Turbo-Parts/Billet-Series/Precision-Turbo-Billet-CEA-6466-900HP-Turbocharger.html
Retail: $1975
You can see the condition of the compressor wheel pretty well here.. Click on the picture to see it full size..
http://i.imgur.com/5djeTEvl.jpg (http://imgur.com/5djeTEv)
http://i.imgur.com/AAlKISNl.jpg
http://i.imgur.com/LzKpH3ml.jpg
http://i.imgur.com/snDDcP8l.jpg
http://i.imgur.com/rSC6hyQl.jpg
http://i.imgur.com/kitiRqvl.jpg
http://i.imgur.com/ZsxgySNl.jpg
The small polished mark on the compressor housing is from rubbing on my cf hood..
Divided T4 housing with v-band out.
http://i.imgur.com/7APPCsnl.jpg
I have a Precision 6466 with well under 1000 miles. It's in excellent condition, I've always ran it with an air filter and used a dedicated 10 micron XRP inline oil filter for the oil feed line.. I mainly just cruised the car with this turbo since it wasn't tuned so it's never seen real boost... Comes with a t3 .63 5-bolt exhaust housing and a ceramic coated 1.32 T4 divided housing! I will not seperate unless you only want the T3 housing.. The T4 housing was ran on a different turbo for about 5k or miles so it's a little dirtier.. should clean right up though... If you want to max out this turbo this T4 housing is what you need..
I'm asking $1550 shipped plus paypal fees.... Comes with everything shown but the -10 drain flange adapter. I can include the XRP -4AN to 1/8"NPT fitting for the oil feed and vacuum line fitting shown if you want.. Text me 609 four five six 9773 for the fastest response..
I wouldn't mind trading for some wheels + cash or + cash on my end. 18" or 19" square setup..
http://realstreetperformance.com/Turbo-Parts/Billet-Series/Precision-Turbo-Billet-CEA-6466-900HP-Turbocharger.html
Retail: $1975
You can see the condition of the compressor wheel pretty well here.. Click on the picture to see it full size..
http://i.imgur.com/5djeTEvl.jpg (http://imgur.com/5djeTEv)
http://i.imgur.com/AAlKISNl.jpg
http://i.imgur.com/LzKpH3ml.jpg
http://i.imgur.com/snDDcP8l.jpg
http://i.imgur.com/rSC6hyQl.jpg
http://i.imgur.com/kitiRqvl.jpg
http://i.imgur.com/ZsxgySNl.jpg
The small polished mark on the compressor housing is from rubbing on my cf hood..
Divided T4 housing with v-band out.
http://i.imgur.com/7APPCsnl.jpg