Track Car Partout SR20 swap High Quality Parts

[steveoen]

Its time to part out the track car ive been building for the last year and a half due to needing to move out and start life sadly ha ha

All Parts located in Santa Clarita CA 91350 (Right next to magic mountain)

Contact me vial text (661) 670-7271 or pm

All parts installed in a 95 S14 and still in the car as it sits on jack stands sr starts up no problem willing to start in front of serious buyers and free to pull your own compression numbers sorry for the pictures but i want to keep the motor assembled until longblock sells then i will take better pictures of individual parts

First up is the SR20 swap its a 94 s13 blacktop i will be splitting up the entire swap but im more than willing to make combo deals or if you want to take the entire thing off my hands we can work out a deal

Long Block, Transmission and stock ecu: 2500$
Without Clutch/Flywheel 2000$

Includes:
- 160psi COLD compression test across the board
-Long Block all new Gaskets except for headgasket
- Brand new Nissan Water Pump
- Brand new Nissan Thermostat
- Brand new belts
- Brand new NGK spark plugs (plus 2 bonus sets)
- Greddy Style Intake Manifold
- Brand new Moroso Lower Oil Pan
- All Accessories PS pump, alternator etc. (everything except turbo set up)
- Brand new XTD lightweight flywheel
- Brand new ACT HD22s Clutch kit
- transmission
- Stock Ecu
-Z32 Maf
- Includes all sensors, coilpacks etc.

http://i912.photobucket.com/albums/ac325/morrow_photos/S7300048.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300048.jpg.html)
http://i912.photobucket.com/albums/ac325/morrow_photos/S7300060.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300060.jpg.html)
http://i912.photobucket.com/albums/ac325/morrow_photos/S7300062.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300062.jpg.html)
http://i912.photobucket.com/albums/ac325/morrow_photos/S7300057.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300057.jpg.html)

SR Swap is still in car i can start it up for any serious buyers to hear it run and pull your own compression numbers etc.

All other Driveline parts for sale that i can include in swap (bundle deals etc.) sorry for the pics that are not very detailed but i want to keep the drivetrain in the car until the motor sells after the motor sells i can take more individual pictures of the parts

Apexi Power FC D-Jetro (map sensor version) with brand new boost controller add on kit which includes brand new map sensor: SOLD

Turbo Set up: 900$ (0 MILES ON THIS WHOLE SETUP)
-Brand New from nissan motorsports S15 ball bearing turbo 0miles on this turbo
-DIF s14 Stainless oil and coolant Lines
-DIF Re-Clocking Plates
-Stock Manifold
-Includes inlet pipes

http://i912.photobucket.com/albums/ac325/morrow_photos/IMG_1406.jpg (http://s912.photobucket.com/user/morrow_photos/media/IMG_1406.jpg.html)

http://i912.photobucket.com/albums/ac325/morrow_photos/S7300059.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300059.jpg.html)

PBM Cobra flex Downpipe trimmed for T28 turbo and heat wrapped: SOLD

http://i912.photobucket.com/albums/ac325/morrow_photos/S7300063.jpg (http://s912.photobucket.com/user/morrow_photos/media/S7300063.jpg.html)

Brand New 0 miles PBM high mount intercooler kit for t28 turbo and greddy style intake manifold: SOLD

Brand New S14 HKS Sport exhaust 0 miles on this exhaust: 350$

Koyo Radiator light fan rubbing but no leaks with Saamco urethane hoses and efan setup: SOLD

Chase bays Oem/Z32 master cylinder stainless brake line kit: 180$

Chase Bays sr20/ka Power steering kit (without cooler)SOLD

DriveShaft shop solid steel non abs driveshaft: 250$

Tomei 2-Way LSD in non abs housing with z32 diff cover: SOLD

Mishimoto Oil cooler kit (Sandwich plate Style): SOLD

STI 550cc Injectors: 100$

[Doriftolover]

Angle kit goodies?

[Dboyizmlg]

Interested in the long block set up,
Will text you tomorrow Steve!

[steveoen]

Angle kit goodies?

i will be putting up suspension parts for sale after motor is sold and i can tear the car apart but i have pbm knuckles (first gen welded) 280$ custom extended control arms 150$ and pbm inner tie rod/ tien out tie rod with rack spacer combo for 150$ and pbm rack spacers 60$

[Doriftolover]

How much are the flca extended? I'm interested

[kevinzhou]

dose the lines come with the master and the oil cooler kit a full kit?

[steveoen]

How much are the flca extended? I'm interested

about 40mm and boxed in with brand new ball joints

[steveoen]

dose the lines come with the master and the oil cooler kit a full kit?

no thats just for the chase bays brakes lines http://www.chasebays.com/product/nissan-240sx/chase-bays-brake-line-relocation-for-oem-mc-inbay--nissan-240sx-s13--s14

master is seperate

[Doriftolover]

I'm really interested.. When you think they'll be ready for pick up?

[steveoen]

I'm really interested.. When you think they'll be ready for pick up?

can pull them off tomorrow text me (661)6707271

[maker_moan]

interested in your s15 t28 turbo! willing to let it go for 800?

[240sxracer15]

How much for lightweight flywheel?

[maker_moan]

your message box is full but i can wait bro and with the clocking adapters

[Kallixtos]

Ugh... Wish i had extra cash for that downpipe

[steveoen]

Inbox cleared!! Trying to keep the motorset together until long lock atleast sells sorry guys

[5280VertDET]

You my PM?

[mogli9000]

Great engine bay

Thumbs up.

[R2RO]

PMd you on Facebook regarding the PBM Intercooler setup & PBM down pipe let me know if these are still available thanks.

[steveoen]

Bump alot of interest still no buyers for the sr swap good quality swap if you are a serious buyer you are more than welcome to come check it out in person

[jerry_beans]

How much for the turbo alone

[steveoen]

Just the turbo alone i could do lowest 800$ cash picked up

[5280VertDET]

STI 550cc Injectors: 100$

Still have these? Any more information on their condition?

Will need shipping.

I was interested in the motorset too, but im sure shipping is a pain and locals make it easy.

[steveoen]

BUMP willing to take reasonable offers let me know i can separate items to make the price cheaper

[idc101]

For how much did you let pbm hmic go for?

[steveoen]

Pbm hmic sold

[XgoldzenkiX]

How much for the driveshaft shipped to 95993??