S14 Cams and Airbags. Help?

[Sills]

Hi! I have a couple new questions now that ive been meaning to ask for a bit! Ill start off with-

Airbag help-
So im currently trying to get my car through local safety inspections which involved me having to swap the steering wheel from its Momo wheel I bought it with, to a stock 240 wheel. However I failed the safety because my SRS light does not come on when the key is turned, the car never showed the airbag light with the momo either. Im wondering how to fix this, I doubt the bulb is burnt out however it could have been removed, or the wire could have been cut? Does anyone have a diagram for the wires or know the bulb placement in a 97 S14 Kouki?

Also a smaller question-
Im wanting to upgrade my camshafts to stage 2's! But im a bit confused on what I can and cannot do! Im running an Sr20de right now with a +t on the way. Its got variable valve timing so I was wondering if any camshafts will fit into it? I was looking at Brian Crower cams but would I lose the variable timing with that?

Thank you very much for any help, Hopefully this is in the right thread..

[underscorerobbie]

I have a zenki s14 and i recently replaced the stock steering wheel with an nrg hub and quick release and unless you solder the airbag wires together with a 3 ohm resistor, the srs light will flash constantly. So it's likely that the previous owner might have either removed the bulb or soldered the wires together while installing the aftermarket steering wheel. I know mine is driving me crazy right now.

[Sills]

I have a zenki s14 and i recently replaced the stock steering wheel with an nrg hub and quick release and unless you solder the airbag wires together with a 3 ohm resistor, the srs light will flash constantly. So it's likely that the previous owner might have either removed the bulb or soldered the wires together while installing the aftermarket steering wheel. I know mine is driving me crazy right now.

Awesome! I appreciate this responce very much! Does anybody have a picture/diagram of what wire I have to check and where it is located??

[underscorerobbie]

It won't let me upload pics right now. But mine is an se, which means it has cruise control. So the wire harness that goes into the stock steering wheel has 3 green wires, a white, and a blue, the green wire with the white trace was my horn wire. Idk about other models for I am a noob.

[underscorerobbie]

A way you could check is to jump each wire to a ground from the harness and whatever sets your horn off is obviously your horn wire. Thats what I did to find mine