Def
02-22-2015, 02:14 PM
Selling my FLCA/upright/5 lug hub/ARP stud setup.
This is a GodSpeed FLCA that's been modded via the semi-famous "DefSport Budget Baller Method":
http://www.nissanroadracing.com/showthread.php?t=1407
So buy it here, and own a piece of S-chassis history. :D
Some details:
GodSpeed FLCA, modified with all QA1 bearings/rod ends
~1.8" of roll center correction (space for more if wanted)
All bearings and rod ends in good shape
Prone to loosening locknuts have all been welded in position (stock S14 FLCA length)
High quality Attain hubs that use stock bearings (no cheap Chinese 5 lug setups that have the bearing die shortly after install)
ARP extended studs, M12x1.5 mm
S13 spindles, strut mounting bolts have been reamed to 1/2", will include 1/2" bolts and new Grade C locknuts (both use 19 mm wrench, easy to service, stronger than stock S13 M12 bolts)
Small mounting bosses for mounting speed sensors to read off stud backs, you can cut them off if you want, or leave them there, or use them if you want to be baller and do something like traction control via an AEM Infinity
http://i.imgur.com/XVglXGl.png
http://i.imgur.com/lF8XQuE.png
http://i.imgur.com/HsZPWw8.png
http://i.imgur.com/E85KgEM.png
New this would be a $800+ setup not including the labor.
$400
This is a GodSpeed FLCA that's been modded via the semi-famous "DefSport Budget Baller Method":
http://www.nissanroadracing.com/showthread.php?t=1407
So buy it here, and own a piece of S-chassis history. :D
Some details:
GodSpeed FLCA, modified with all QA1 bearings/rod ends
~1.8" of roll center correction (space for more if wanted)
All bearings and rod ends in good shape
Prone to loosening locknuts have all been welded in position (stock S14 FLCA length)
High quality Attain hubs that use stock bearings (no cheap Chinese 5 lug setups that have the bearing die shortly after install)
ARP extended studs, M12x1.5 mm
S13 spindles, strut mounting bolts have been reamed to 1/2", will include 1/2" bolts and new Grade C locknuts (both use 19 mm wrench, easy to service, stronger than stock S13 M12 bolts)
Small mounting bosses for mounting speed sensors to read off stud backs, you can cut them off if you want, or leave them there, or use them if you want to be baller and do something like traction control via an AEM Infinity
http://i.imgur.com/XVglXGl.png
http://i.imgur.com/lF8XQuE.png
http://i.imgur.com/HsZPWw8.png
http://i.imgur.com/E85KgEM.png
New this would be a $800+ setup not including the labor.
$400