PDA

View Full Version : Most suitable Cams for Garrett 2871.64


frmdabak187
02-20-2015, 06:35 PM
As the title states i am looking for the most suitable CAM for my 2871.64
My goal is to have the most torque as early as possible F.Y.I

My supporting mods.

"SR20Store" S14 SR notch w/58k miles (the motor was a 0 mile build)
Eagle rods
CP pistons
ACL bearings
BC 272/272 in/ex cams (WAY to BIG)
BC valves/springs/seats
RAS
Apex-i super suction kit
Tomei 555’s
CX intercooler
2-row aluminum rad
Z32 maf
OS Giken Super Single Clutch
POWER FC

Chriscooke
02-20-2015, 08:04 PM
Would stock cams not be ideal if you want the power low down in the rev range?

I run 260 pro cams and still find the car laggy.

livelovesole
03-10-2015, 07:56 PM
JWT S3 personally. If you can, look up the GT2871 Thread, lots of helpful tips and info regarding different setups using your turbo.

az_240
03-11-2015, 02:26 AM
For what you're trying to do I say get VTC working if it isn't already and run these Tomei 256/256 cams I have for sale.
http://zilvia.net/f/showthread.php?t=593415
Torque will come on earlier than the S3's and are perfect cams for your injector/turbo size.

battosaii930
07-09-2015, 11:43 AM
i run a GT2871r with Tomei Poncams 256/256 and a z33 6 speed and my car is not laggy what so ever

Aeroscraper326
07-11-2015, 12:58 AM
I was going to say HKS 256/264... Should be good. If available

TheRealSy90
07-11-2015, 01:49 AM
JWT S4 cams.

Tom N
07-12-2015, 09:31 PM
I really like the tomei 256/260 with working VCT on smaller turbos.
Car is very responsive with a slightly larger turbo than the GT2867 (20g) and holds power towards 8k rpm.
No experience with JWT cams and would run as fast as possible from BC cams.