FS: Custom Turbo Part-out, JWT, Tial, Stack, MSD

[RedRedWine]

Hello I am parting out my custom KA24E-T setup. Everything is less than 2 years old unless otherwise stated. This was a great reliable setup for the street with a potential to make 350whp. I only ran this setup at 7lbs of boost for reliability. This setup will also work with stock sr20 intercooler piping and sidemount with minor fitment issues. I am flexible on pricing so feel free to make reasonable offers.






KA24E Jim Wolf Technology ecu is tuned for msd 50lbs injectors and ford cobra maf.
SOLD

http://i207.photobucket.com/albums/bb245/akan5/CAM00051_zps1760b475.jpg (http://s207.photobucket.com/user/akan5/media/CAM00051_zps1760b475.jpg.html)


This is a custom side mount manifold made of cold rolled steel with 1/2" thick flange, t3 inlet flange and 38mm waste gate flange. I will not sell the manifold separate from the turbo elbow or downpipe. SOLD

http://i207.photobucket.com/albums/bb245/akan5/CAM00007_zpse924c3ee.jpg (http://s207.photobucket.com/user/akan5/media/CAM00007_zpse924c3ee.jpg.html)

Tial Wastegate with 7lb spring SOLD
http://i207.photobucket.com/albums/bb245/akan5/CAM00035-1_zps49a63ffd.jpg (http://s207.photobucket.com/user/akan5/media/CAM00035-1_zps49a63ffd.jpg.html)



Stack Oil pressure guage SOLD
Stack Oil temperature guage (no sensor included) $55 picked up/$65 shipped
Stack AFR Wideband SOLD

http://i207.photobucket.com/albums/bb245/akan5/CAM00608-1_zps2cd1d6d3.jpg (http://s207.photobucket.com/user/akan5/media/CAM00608-1_zps2cd1d6d3.jpg.html)



89 ka24e m/t stock ecu $40 picked up/$50 shipped

http://i207.photobucket.com/albums/bb245/akan5/CAM00053_zps2f48bca8.jpg (http://s207.photobucket.com/user/akan5/media/CAM00053_zps2f48bca8.jpg.html)

Buddyclub shift knob $20 picked up/$25 shipped

http://i207.photobucket.com/albums/bb245/akan5/CAM00081_zps8bb3c582.jpg (http://s207.photobucket.com/user/akan5/media/CAM00081_zps8bb3c582.jpg.html)

BNIB Hawk Hp Plus 97-01 Q45 pads $50 picked up/$60 shipped
http://i207.photobucket.com/albums/bb245/akan5/06111011.jpg (http://s207.photobucket.com/user/akan5/media/06111011.jpg.html)

I have one s13 silvia passenger side fender for sale. There is a crack on the fender which is pictured below. All mounting tabs are in good condition except for one hole on top.

http://i207.photobucket.com/albums/bb245/akan5/CAM00436_zps9635c621.jpg (http://s207.photobucket.com/user/akan5/media/CAM00436_zps9635c621.jpg.html)

http://i207.photobucket.com/albums/bb245/akan5/CAM00433_zps80b0e977.jpg (http://s207.photobucket.com/user/akan5/media/CAM00433_zps80b0e977.jpg.html)

Small crack
http://i207.photobucket.com/albums/bb245/akan5/CAM00438_zps9044024a.jpg (http://s207.photobucket.com/user/akan5/media/CAM00438_zps9044024a.jpg.html)

http://i207.photobucket.com/albums/bb245/akan5/att_1413943781137192_zps58691c60.jpeg (http://s207.photobucket.com/user/akan5/media/att_1413943781137192_zps58691c60.jpeg.html)
Price: $80 OBO This is for pickup only I will not ship this item.

I also have a stock ka24e oil pan $40 picked up $65 shipped



Location: Ontario, Ca

Contact: PM or text (909) 294-1255

Thank you, Aaron

[Boost-Fiend]

Planning a trip to vegas anytime soon? I could use the fender

[RedRedWine]

Planning a trip to vegas anytime soon? I could use the fender

Sounds tempting but I have no plans on going to vegas.

[RedRedWine]

Updated list of items

[Slow2k]

Still have the FPR?

[niSm095]

Interested in the oil pressure gauge if you still have it?

[RedRedWine]

Thread has been updated

Still have the FPR?

Yes I do

Interested in the oil pressure gauge if you still have it?

Yes it is still available

[niSm095]

do you have the sending unit with the oil pressure gauge?

[RedRedWine]

I have a couple items left. Let me know if your interested thanks.

[RedRedWine]

Bump. Few items left

[RedRedWine]

still have some items available