s13drob
01-23-2015, 03:28 PM
Hey guys, I'm selling a custom Sr20det valve height tool. I used it on my SR and it works perfect. I had to make one since I couldn't find any when I needed it.
120$
For those that don't know what it's for, you would use this tool after any valve work to make sure the valve heights with the shims/guides are level for the rocker arm to sit on. If they're not within spec the rocker arm will eventually get thrown off and possibly cause major engine failure.*
http://i69.photobucket.com/albums/i56/pro_roller3030/Mobile%20Uploads/IMAG0382.jpg (http://s69.photobucket.com/user/pro_roller3030/media/Mobile%20Uploads/IMAG0382.jpg.html)
http://i69.photobucket.com/albums/i56/pro_roller3030/Mobile%20Uploads/IMAG0381.jpg (http://s69.photobucket.com/user/pro_roller3030/media/Mobile%20Uploads/IMAG0381.jpg.html)
120$
For those that don't know what it's for, you would use this tool after any valve work to make sure the valve heights with the shims/guides are level for the rocker arm to sit on. If they're not within spec the rocker arm will eventually get thrown off and possibly cause major engine failure.*
http://i69.photobucket.com/albums/i56/pro_roller3030/Mobile%20Uploads/IMAG0382.jpg (http://s69.photobucket.com/user/pro_roller3030/media/Mobile%20Uploads/IMAG0382.jpg.html)
http://i69.photobucket.com/albums/i56/pro_roller3030/Mobile%20Uploads/IMAG0381.jpg (http://s69.photobucket.com/user/pro_roller3030/media/Mobile%20Uploads/IMAG0381.jpg.html)