Rustys14
01-23-2015, 12:18 PM
So I'm looking to free up some space in the garage and doubt I'll get around to using any of this stuff so its up for grabs. I prefer local pickup but may consider shipping the rails (at buyers expense) if there is no local interest. May consider trades for or Type X stuff or anything baller that tickles my fancy. Feel free to PM me with any questions and thanks for looking!
First up is a built KA. I purchased it about a year ago from a dude in MD after mine blew. I have since sold my turbo setup and gone back to NA for reliability/daily driving purposes and doubt I'll use this. Was told it had Arias pistons, shot peened stock rods and acl race bearings. I was able to confirm that it does in fact have Arias pistons by pulling the pan and looking at the stamps on the back of the back of the pistons so i have no reason to doubt the rest. It currently had a stock head and headbolts installed but it will also come with a port and polished head that needs a helicoil for the idler sprocket since its stripped. The motor does have the 248 cam swap and also comes with a fully emissions deleted intake manifold. SOLD!
Pics ( a bit dirty from sitting in my garage)
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0019_zpslmqekel3.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0019_zpslmqekel3.jpg.html)
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0018_zps8e3vhlwg.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0018_zps8e3vhlwg.jpg.html)
Next up is a old school Recaro Seat that I got from a local importer awhile back. Its a bit worn and has been patched in a few places but still looks pretty good. Its really comfy too! I'm not sure what model it is but was told that it was pulled from a Z32. SOLD!
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0015_zpsggfz9pst.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0015_zpsggfz9pst.jpg.html)
I also have a driver side s13/14 Planted bracket. It has some holes drilled for seat mounting but was never actually installed in a car. SOLD!
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0016_zpszx8kpi9f.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0016_zpszx8kpi9f.jpg.html)
Finally I have a set of aftermarket bottom mount seat rails for a Z32 300zx. These came on the Recaro so I know they will work with Recaro seats. Not sure about other brands but you should be able to drill them out to fit. Asking $80
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0017_zpsx8dxkadd.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0017_zpsx8dxkadd.jpg.html)
First up is a built KA. I purchased it about a year ago from a dude in MD after mine blew. I have since sold my turbo setup and gone back to NA for reliability/daily driving purposes and doubt I'll use this. Was told it had Arias pistons, shot peened stock rods and acl race bearings. I was able to confirm that it does in fact have Arias pistons by pulling the pan and looking at the stamps on the back of the back of the pistons so i have no reason to doubt the rest. It currently had a stock head and headbolts installed but it will also come with a port and polished head that needs a helicoil for the idler sprocket since its stripped. The motor does have the 248 cam swap and also comes with a fully emissions deleted intake manifold. SOLD!
Pics ( a bit dirty from sitting in my garage)
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0019_zpslmqekel3.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0019_zpslmqekel3.jpg.html)
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0018_zps8e3vhlwg.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0018_zps8e3vhlwg.jpg.html)
Next up is a old school Recaro Seat that I got from a local importer awhile back. Its a bit worn and has been patched in a few places but still looks pretty good. Its really comfy too! I'm not sure what model it is but was told that it was pulled from a Z32. SOLD!
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0015_zpsggfz9pst.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0015_zpsggfz9pst.jpg.html)
I also have a driver side s13/14 Planted bracket. It has some holes drilled for seat mounting but was never actually installed in a car. SOLD!
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0016_zpszx8kpi9f.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0016_zpszx8kpi9f.jpg.html)
Finally I have a set of aftermarket bottom mount seat rails for a Z32 300zx. These came on the Recaro so I know they will work with Recaro seats. Not sure about other brands but you should be able to drill them out to fit. Asking $80
http://i1304.photobucket.com/albums/s532/jfox31/IMG_0017_zpsx8dxkadd.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0017_zpsx8dxkadd.jpg.html)