CTS-V Brembo Setup

[MurphyWorks]

Complete CTS-V Brake setup, brand new only mounted on the car for mock up

Comes with

CTS-V Calipers - Sold
Mazworx adapter brackets - Sold
Mitsubishi Evo VIII Rotors and Pads - 120 for both

Got a good deal on a set of R32 GTR wheels that wont clear the setup so I'm going a different route.

Looking for 500 OBO

[stunnaben]

These bolt on correct? School me as Im not familiar :/ been out of the game. Very interested however.


Sent from my iPhone using Tapatalk

[iLagX]

how come your not running 350z track rotors?

r32 gtr wheel should clean if you have the right rotors

[killer240]

mazworx specifically said these brackets go with EVO VIII rotors which are 320mm x 32mm.
350z is 324mm x 30mm so it would have less grab
370z is 355mm x 32mm which I don't think will work since theres a big difference on the rotor diameter.

although; ctsv brake swap sells a bracket that uses 370z track rotors, but I don't like the idea of tapping one of the spindles mounting holes. If I had stock spindles I wouldn't mind. Also not to mention they are more expensive, $160.

[MurphyWorks]

The rear of the calipers have to be clearanced for the Mazworx brackets to fit, the Brembos have fins on one side that have to be removed.

As far as the 350z rotors Im hoping to make a little money off these and go with Z32's, I'm finishing up my LS6 swap and I have a few other pieces I need to get to be finished.

[ErikDAmofuk]

Can I run 17inch wheels with this set up?

[killer240]

I just noticed you have the caliper upside down.
You got my number, text me and let me know.

I believe you can run these on 17's as long as it's not step lip/barrel.

[MurphyWorks]

You should be able to run certain 17s it depends on the spoke design.

[MurphyWorks]

Calipers/Brackets sold still have the rotors and pads if someone is looking to do a swap

[crewchief05]

why no STI brakes. They are a bit better than the CTS-V imo. Either way great upgrade. GLWS and free bump