StrokedS13
12-30-2014, 12:52 PM
I have a few items left over from my current project that are up for sale. I'll listen to reasonable offers, but flexibility will also depend on timeframe and shipping if needed. I will only ship if you have Paypal, and you will need to cover fees (+3%) and shipping. Feel free to shoot me a PM if you have questions or need additional pictures. Thanks!
- TopSpeed Polished Intake Manifold with JGY Customs fuel rail and Nismo/Tomei Fuel Pressure regulator (Never used, but mocked up well on my Redtop. Factory throttle body pattern.) $300
http://images.craigslist.org/00x0x_jHpkIcqKwXD_600x450.jpg
-Blitz Access ECU. Case is damaged, but boards/internals looks fine. I don't have a running car to test it on currently, but it worked well in my previous car. This a "factory tuned" ECU and not a custom tuned ECU. It will remove limiters and have some slightly aggressive fueling, but it is not programmed for cams, turbos, etc. $35
http://images.craigslist.org/00X0X_iiNNNsiUvdn_600x450.jpg
-OEM S13 Manual/non-ABS (2-piece) driveshaft for KA/SR motors. (Not pictured) $60
-71C Transmission internal gearbox assembly. Synchros need replaced, no bell housing, but everything else is there. $25
http://images.craigslist.org/00l0l_8hhWecN1B6x_600x450.jpg
-Shark nose front bumper lower vents. (Not pictured) $8
-Shark nose front turn signals $10
http://images.craigslist.org/00X0X_35V82hU0WiI_600x450.jpg
-S13 A/C condenser with lines (Will not ship) $15
http://images.craigslist.org/00u0u_7pS3bLhqcuw_600x450.jpg
-S13 Redtop SR20 Factory intake manifold (not pictured, upper and lower pieces and gaskets) $10
-S13 Hatch rear seats, both pieces. Top of seat back is a little sun-faded. But, no rips/tears/burns. (not pictured) $25
- TopSpeed Polished Intake Manifold with JGY Customs fuel rail and Nismo/Tomei Fuel Pressure regulator (Never used, but mocked up well on my Redtop. Factory throttle body pattern.) $300
http://images.craigslist.org/00x0x_jHpkIcqKwXD_600x450.jpg
-Blitz Access ECU. Case is damaged, but boards/internals looks fine. I don't have a running car to test it on currently, but it worked well in my previous car. This a "factory tuned" ECU and not a custom tuned ECU. It will remove limiters and have some slightly aggressive fueling, but it is not programmed for cams, turbos, etc. $35
http://images.craigslist.org/00X0X_iiNNNsiUvdn_600x450.jpg
-OEM S13 Manual/non-ABS (2-piece) driveshaft for KA/SR motors. (Not pictured) $60
-71C Transmission internal gearbox assembly. Synchros need replaced, no bell housing, but everything else is there. $25
http://images.craigslist.org/00l0l_8hhWecN1B6x_600x450.jpg
-Shark nose front bumper lower vents. (Not pictured) $8
-Shark nose front turn signals $10
http://images.craigslist.org/00X0X_35V82hU0WiI_600x450.jpg
-S13 A/C condenser with lines (Will not ship) $15
http://images.craigslist.org/00u0u_7pS3bLhqcuw_600x450.jpg
-S13 Redtop SR20 Factory intake manifold (not pictured, upper and lower pieces and gaskets) $10
-S13 Hatch rear seats, both pieces. Top of seat back is a little sun-faded. But, no rips/tears/burns. (not pictured) $25