NordicMistBB6
12-07-2014, 12:18 PM
Selling my 302 project that I just rebuilt. Originally was an 85 block but converted to hydraulic roller and converted to MAF. Everything in this engine is brand new other than the rods, although they were reconditioned with new arp hardware. Includes clutch setup and rebuilt World Class T5 trans!
Specs:
1985 SBF 302 bored .030 over.
New .030 chromoly rings
New .030 Keith black flat top Pistons (9.5:1 cr)
New block plugs
New main bearings
New cam bearings
New rod bearings
Ford racing B303 camshaft
New double roller timing chain
Scorpion hydraulic roller lifters
3 angle valve job with new hardened seats, shims and seals
GT40P heads with upgraded 1.6rr's and dual valve springs
All new gaskets (obviously)
New oil pump
Arp head bolts
Professional products harmonic balancer and spacer
Centerforce stage 2 clutch/pressure plate
GT40P intake manifold (x2)
24lb cobra injectors
80mm maf programmed for the injectors.
BBK shorties
BBK Fuel rails
Professional products throttle body
Pro5.0 Power Tower Short Shifter
RAM hydraulic throw out setup
Mildly ported heads
Concept8 solid engine and trans mounts
Concept8 baffled 7qt front sump
Concept8 harness
A9L ecu with sct eliminator chip
I'm sure I'm missing things but this is all I could remember off the top of my head.
Block, heads and crank were all magnafluxed by a machine shop. Everything is in amazing shape
$2500 Obo.
Located in East Hartford CT.
Any questions contact me on here or 8608829801
Specs:
1985 SBF 302 bored .030 over.
New .030 chromoly rings
New .030 Keith black flat top Pistons (9.5:1 cr)
New block plugs
New main bearings
New cam bearings
New rod bearings
Ford racing B303 camshaft
New double roller timing chain
Scorpion hydraulic roller lifters
3 angle valve job with new hardened seats, shims and seals
GT40P heads with upgraded 1.6rr's and dual valve springs
All new gaskets (obviously)
New oil pump
Arp head bolts
Professional products harmonic balancer and spacer
Centerforce stage 2 clutch/pressure plate
GT40P intake manifold (x2)
24lb cobra injectors
80mm maf programmed for the injectors.
BBK shorties
BBK Fuel rails
Professional products throttle body
Pro5.0 Power Tower Short Shifter
RAM hydraulic throw out setup
Mildly ported heads
Concept8 solid engine and trans mounts
Concept8 baffled 7qt front sump
Concept8 harness
A9L ecu with sct eliminator chip
I'm sure I'm missing things but this is all I could remember off the top of my head.
Block, heads and crank were all magnafluxed by a machine shop. Everything is in amazing shape
$2500 Obo.
Located in East Hartford CT.
Any questions contact me on here or 8608829801