PDA

View Full Version : TX Complete KA24DE motor partout

SupraG93
12-06-2014, 07:52 AM
Hey folks, I have a complete "94 KA24DE motor im parting out. Engine is completely disassembled and was cleaned and inspected at my local machinist. Block will need a rebore and honing as cylinder walls are scratched. crank needs polishing and new bearings. Pistons and rods are still good. Head is good but may need new valve guides. Camshafts, gears, springs and retainers, valves, covers, pumps, complete intake manifold with fuel rail and injectors, aftermarket headers are all good. Perfect motor to build for forced induction. Any questions please ask or PM me for more details.
http://i220.photobucket.com/albums/dd135/SupraG93/photo7_zps08866402.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo1_zpsbcd14c2a.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo2_zpsc1432a43.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo_zps47019e16.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo6_zps264f705e.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo3_zps765335bf.jpg


http://i220.photobucket.com/albums/dd135/SupraG93/photo4_zpsb66c0607.jpg

http://i220.photobucket.com/albums/dd135/SupraG93/photo5_zps8a17e422.jpg
SupraG93
12-20-2014, 04:37 PM
Prices dont include shipping, please ask for total via PM.

1. bare block with caps, craddle, and hardware. $200
2. Cylinder Head with caps and hardware. $200
3. Valvecover . $50
4. Timing chain covers upper and lower.SOLD
5. Oil pan. $50
6. Crankshaft. $150
7. Camshafts exhaust and intake. $80 for both or $40 each
8. Ebay Exhaust Headers. SOLD
9. Intake manifold with out fuel rail and injectors. $80
10. Fuel rail and injectors. $80
11. Complete engine harness. $150
12. ECU 5speed. SOLD
13. Valves and springs set complete. $80
14. Cam gears and timing gears. $30 each gear
15. Distributor with rotor and cap and wires. $60
SupraG93
12-26-2014, 10:20 PM
Bump, Headers SOLD
dhen
12-30-2014, 10:10 AM
Are you interested in selling the oil squirters?
SupraG93
01-02-2015, 08:34 AM
PMed you Dhen
Asad_240
02-16-2015, 09:09 AM
Do u have a tranny?
Cpt_sideways
04-17-2015, 01:35 PM
Let me get that lower harness.
dmisior95
04-18-2015, 05:07 AM
Is the oil pan cracked ?