Pro Am S13 Parts For Sale

[braydo25]

Lots o' good stuff up for sale. Changing a lot on my car this season, so the old is out and up for sale. Everything aftermarket listed was only run for the last season. The car was only tracked, so super low miles on everything (Bought all parts new)

PM me for quotes shipped to your zip.

All parts are located in WA (seattle area). I'd prefer to sell larger items locally but can ship at buyer's expense.

All aftermarket parts were purchased NEW.

Everything is in great working condition - any problems / issues with specific parts are listed.

All cash offers considered.

-- ALL PARTS ARE FROM MY S13 --

SPL Front Tension Rods - $190

Ikeya Formula Double Adjustable Inner Tie Rods - $120

Mavericks Motorsports Rear Dual Caliper Kit + Necessary Rotors (You just need 2 sets of rear z32 calipers) - $240

Sikky 30mm Front Sway Bar + End Links (Will clear v8, jz, rb swaps.) - $225

Xcessive Bolt On Front Skid Plate (covers oil pan) - $70

SR20DET Mishimotor Radiator + Mishimoto E-Fans - $320

(6) 16x8 +20 XXR 531 Polished. Good condition Azenis on the front pair, decent tread drift spare tires on the other 4. Scratches / scuffs on the rear 4. - $400

[braydo25]

PM's replied

[IneedAGasTank]

Lots o' good stuff up for sale. Changing a lot on my car this season, so the old is out and up for sale. Everything aftermarket listed was only run for the last season. The car was only tracked, so super low miles on everything (Bought all parts new)

PM me for quotes shipped to your zip.

All parts are located in WA (seattle area). I'd prefer to sell larger items locally but can ship at buyer's expense.

All aftermarket parts were purchased NEW.

Everything is in great working condition - any problems / issues with specific parts are listed.

All cash offers considered. The only possible trades I'm interested in are GT style wing, oem s13 coupe rear bumper, oem rear coupe center garnish, 18x10.5" RPF1's, FIA certified side mount seat(s), undamaged s13 driver door.

-- ALL PARTS ARE FROM MY S13 --

SPL Front Tension Rods - $190

Ikeya Formula Double Adjustable Inner Tie Rods - $120

SPL Outer Tie Rod Ends (Pro V5) - $190

SPL Rear Toe Arms - $200

SPL Rear Upper Camber Arms - $275

SPL Rear Traction Arms - $200

Newish OEM Rear Lower Control Arms w/ Moog Ball Joints - $120

ISIS L Shape Hydro Ebrake With 5/8" Wilwood Cylinder + Reservoir - $80

Mavericks Motorsports Rear Dual Caliper Kit + Necessary Rotors (You just need 2 sets of rear z32 calipers) - $240

Sikky 30mm Front Sway Bar + End Links (Will clear v8, jz, rb swaps.) - $225

Xcessive Bolt On Front Skid Plate (covers oil pan) - $70

Sparco Pro 2000 Seat (Side Mount) -

OMP HTE Seat + Driver Planted Bracket (Side mount) - $800

SR20DET Mishimotor Radiator + Mishimoto E-Fans - $320


(6) 16x8 +20 XXR 531 Polished. Good condition Azenis on the front pair, decent tread drift spare tires on the other 4. Scratches / scuffs on the rear 4. - $400


(2) RX7 FD Wheels + Tires, clears z32 brakes, 16x8 (Not sure of the offset) - $110

Complete Abercrombie S13 66* Angle Kit (Modified Steering Rack, Extended LCA's, Modified Knuckles) - $700

Apexi N1 Coilovers - $500

--- Stock S13 / Misc Things ---

Uncut, complete s13 chassis harness w/ fuse boxes - $150

Aristo 2JZGTE Automatic Transmission & Torque Converter (No bellhousing) - $80

JDM 2JZGTE Twin Turbos + piping / assembly - $80

Complete S13 Gas Tank, No leaks, removed for fuel cell (Still has 1/2 tank of good gas + cap, lol) - $80
Hey man can you ship the 240 SX S13 gas tank please??? I'll cover the fees!

[braydo25]

Hey man can you ship the 240 SX S13 gas tank please??? I'll cover the fees!

Hahah, I mean I can - it's going to be one huge box and the fuel will have to be drained.

[IneedAGasTank]

Okay lol uhh this is a 1995 Nissan 240 SX gas tank right?

[jdmfan13]

I like to buy a part i send u some pm ..no answer .............:.?........

[IneedAGasTank]

Some pm??? I'm confused sorry

[IneedAGasTank]

Are you selling a 1995 Nissan 240 SX / S13 gas tank ?

[IneedAGasTank]

Oh sorry about that

[braydo25]

Okay lol uhh this is a 1995 Nissan 240 SX gas tank right?

No, this is a 92 gas tank.

[IneedAGasTank]

Aww man dang! Well can you suggest anyone that has a 1995 Nissan 249 SX tank???? I would highly appreciate it.

[IneedAGasTank]

I meant a 240

[braydo25]

I meant a 240

No idea man, sorry

[sr20time]

What condition are the coils in. I might just be interested in those.

[w1zeman]

225 shipped for the sikky swap bar and excessive skid plate? 30019

[braydo25]

225 shipped for the sikky swap bar and excessive skid plate? 30019

No. Sorry, that's what I'm asking for the sikky bar alone

[braydo25]

What condition are the coils in. I might just be interested in those.

Great functional condition, the only thing that's not in great shape is the exterior of the lock collar for adjusting the height. We used a screw driver / hammer to loosen and tighten it when adjusting height, so there are indentson the edges of the collar.

[lilben94]

Interested in the hydro ebrake setup. PM sent

[bill23500]

Also PMed about Hydro Ebrake

[w1zeman]

180 shipped for just the Sikky bar then?

[braydo25]

180 shipped for just the Sikky bar then?

Sale is pending, sorry.

[Dejvid1785]

Is the hydro e brake still available and do you have pics?

[braydo25]

Is the hydro e brake still available and do you have pics?

Sold, sorry

[braydo25]

bump, lots of stuff still for sale. prices dropped.

[Mfabsr20]

Pm'd you. I am in Portland, I can make it to Seattle anytime.

[Mfabsr20]

Pm'd you. I am in Portland. I can make it up to Seattle in no time.

[moowee240]

Are you selling the fuel sell?

[TwelveAM]

Still have the Apexi N1 coils?

[braydo25]

Still have the Apexi N1 coils?

Yep yep still have them

[braydo25]

Are you selling the fuel sell?

The factory fuel tank? Yeah, still for sale.

[streetracer8x]

Still have spl front tension rod?? Shipped to johnston ri

[bill23500]

PMed about the tracking number for the hydro ebrake. I sent the payment last week and still awaiting the tracking number. I have sent multiple PMs with no response. Let me know.

[NJs13_1993]

Same here. My tie rods were supposed to e shipped first thing yesterday. Multiple pm'd an still no reply. I sent payment saturday

[Beijing_Raccoon]

Pictures of the chassis harness and what did it come out of?

[braydo25]

Still have spl front tension rod?? Shipped to johnston ri

Yep still have them, $210 shipped

[braydo25]

Sent trackings ^

[the head]

price on pro 2000

[braydo25]

price on pro 2000

$350, it's the older classic style. The seat itself is out of certification date.

[braydo25]

Prices updated

[braydo25]

bumpity bump bump

[sideview_180sx]

PM sent (message length)

[falec201]

hey im interest in the wiring harness with the 2 fuseboxs pm me please

[sideview_180sx]

thanks package arrived.... +1 on a great seller. prompt and thorough.

[braydo25]

Lots sold, prices updated!

[braydo25]

hey im interest in the wiring harness with the 2 fuseboxs pm me please

Sorry, sold :(

[xcom90]

pm'd about dual caliper bracket

[soCALsx]

Sell the lca's separate ? And what mm?

[sneakypete]

I'll take the sway bar, sent you a pm

[mr.fixit]

interested in apexi coils, pics of them and condition?

[soCALsx]

I want to buy the lcas

[braydo25]

Updated for sale list! Everything is available and ready to ship next day!

[braydo25]

Need to get rid of this stuff! Taking offers!

[braydo25]

Prices lowered, everything OBO

[thegr8one013]

what happen? you dont want to sell me the sway bar?