Work VSXX 5x114.3, 18x10+24, 18x11+26/ 265/35& 315/30 Azenis RT-615

[Rick-95ZE]

Fitment: With a minor roll in the front and roll& pull in the rear you can fit these with the 265s (even 275) up front and 315s (even 335) in the rear. The roll and pull would not be necessary if you ran smaller width tires. There were questions about inner clearance with this offset. The rear 18x11 +26 inner clearance is no problem, fits with plenty for room to spare with or without coilovers. The front (18x10+ 24) will fit with your stock style strut by running maximum positive camber using the lower strut bolt camber adjustment, then using aftermarket camber plates to put you back into the negative camber settings, you will then have 5-8mm gap between the body of the strut and the inner rim lip. Only way you can run front coilovers with this setup is using the Megan Racing extension brackets (as seen in pics below) I'm not sure what other coilover manufactures have the same thread pitch and diameter. and yes the fronts will clear big brakes.

Condition: The rims are a 8 out of 10 and my standards are high, there was an issue with one one of the front inner spokes getting slightly chipped up by the front parking light wiring harness of my s14, after coming loose and then coming into contact with the spokes on a joy ride. NO bends, No rash..


Wheels have been SOLD!!
I will separate them but I will only ship once both pairs have sold and I've received payment
$1025 + shipping for the 18x10s, Price is FIRM
$1150 + shipping for the 18x11s, Price is FIRM






Pics:

http://i264.photobucket.com/albums/ii196/Ricksil80/305516_458239627535984_641935210_n_zps684a4966.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/533604_425376454155635_2105355176_n_zpsbcf74030.jp g


http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_223904_zpsbcd26482.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_230719_zpsdc276784.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_230757_zps0a64f018.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_230803_zps25d01694.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_230732_zpsbd017f58.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_230712_zpsdc4b583c.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232501_zps942deacb.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232510_zps97be952e.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232520_zps408acc1b.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232711_zps93526143.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232727_zps37dabbb5.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/20150106_232920_zps127c5cb7.jpg







http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG4060_zpsb880a989.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG4059_zps0fb18cf8.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/540684_597847423575203_233695938_n_zpsabd6b08e.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3881_zps48d35910.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3880_zps5aa994ac.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3877_zps592c89db.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3849_zpsb044a245.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3851_zpsf695a7a0.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3298_zps3202179b.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3297_zps39f276be.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG3290_zps9b3f460b.jpg

[sleek6mt]

Did your car sell? Great build

[Rick-95ZE]

Did your car sell? Great build

She gone.. http://zilvia.net/f/showthread.php?t=582645

[RickS14]

Awe damn.just spent more money on my jz swap. We live in the same state. Glws!
Love the wheels.

[s14Art]

Bump for the previous owner of my new car :)

[Rick-95ZE]

Bump for the previous owner of my new car :)

:)

I swear if these don't sell for close to what I want, I'm going to have 4 of the most badass coffee/beer tables ever,LOL!

http://i264.photobucket.com/albums/ii196/Ricksil80/recycledtiretable_zps5f0bf547.jpg

[Rick-95ZE]

I'll be looking to remove the tires (myself) late next week to prepare to sell them separate. So if you want the package let me know asap, even if you're not ready to pay. I just need to gauge the interest folks might have in the the wheels AND tires together.

[Rick-95ZE]

(Bump) Tires now for sale on local CL

[Rick-95ZE]

Time for a bump

[Rick-95ZE]

Bump for the weekend!:)

[iRONDONkey]

did you sell your work VS MX wheels?

[Rick-95ZE]

did you sell your work VS MX wheels?

Yes........

[Rick-95ZE]

Local sale pending on the tires and if all goes as planned I will be dropping the price on the rims.

[Rick-95ZE]

Tires are sold, price reduced.

[onehundredoctane]

Bump for a good ass price on some LEGIT wheels! GLWS.

[Rick-95ZE]

Weekend bump

[Rick-95ZE]

Christmas bump!!

[Wiesner12]

Very tempting!

[Rick-95ZE]

Very tempting!

I can have them boxed up and ready to ship out tomorrow!! Just sayin:):)

[Rick-95ZE]

Bump for price drop.

[DennisC]

Any chance you are selling those front extended brackets ?

[Rick-95ZE]

Any chance you are selling those front extended brackets ?

When I sold the s14 last month, those were attached, sorry. But you should be able to find a new set for $123.00 here: http://www.meganracing.com/product_detail.asp?prodid=967&catid=56 :)

[Wheel Lounge]

Clean setup! Bump! I love the tread pattern on the RT-615k

[Rick-95ZE]

Bump........

[Rick-95ZE]

I have a local offer of $2000 picked up :picardfp: Can any of you offer something better than that??? speak now!!!

[Wiesner12]

That's the number I had in mind as well when we were discussing the price. GLWS

[Rick-95ZE]

That's the number I had in mind as well when we were discussing the price. GLWS

Yes but this guy lives about a half hour north of where I live, he has not seen the wheels in person yet but was thinking that for 2k they should be flawless. Considering there's a few sets of these on here with asking prices of $2800 + shipping for "mint" or "flawless" I don't feel mine have $800 worth of damage. In fact if this guy passes I've decided that I'm going to invest the time and sand and re-polish the front two (only two with slight rash) and re-paint the center spoke of the one with the little chips. I will then raise the price to $2600 + shipping. BTW, the easiest way to sand and re-polish the lips is to bolt them to a car that's jacked up on a lift, put the vehicle in drive and you've just turned you car into a lathe. I've done this a few times and it cuts the polishing time down to about and hour or two per wheel, I was just being lazy with these. NO WAY I'm selling these for less than $2000.. It's just not going to happen, period.

[Rick-95ZE]

Final bump before they get refreshed and the price goes up.

[Wheel Lounge]

I have a local offer of $2000 picked up :picardfp: Can any of you offer something better than that??? speak now!!!

The sad truth is that the market of low ballers have increased... :ugh: I recently listed a set of 3 piece Romana wheels on a Facebook group for a mere $500 with polished lips and I was getting sad offers such as $400.. legit 3 piece wheels!

[Rick-95ZE]

The sad truth is that the market of low ballers have increased... :ugh: I recently listed a set of 3 piece Romana wheels on a Facebook group for a mere $500 with polished lips and I was getting sad offers such as $400.. legit 3 piece wheels!
Well, I decided to go ahead and sand and re-polish the front two and shine up the rears tonight. Now there is NO rash on any of the lips and the price is now firm @ $2175 +shipping. The more work I do to them in the weeks to come, the higher the price is going to get. I'll be posting updated pics here shortly.

[Rick-95ZE]

Now cleaned and polished with new pics, no more rash, and firm new price!

[Rick-95ZE]

Bump.........

[izzy0007]

interested on any trades?

[Rick-95ZE]

interested on any trades?

Well, I would have been BUT I just purchased these: http://www.myg37.com/forums/private-classifieds/264025-19-volk-g2-gunmetal-19x9-5-19x10-5-35-a.html

for this:
http://i264.photobucket.com/albums/ii196/Ricksil80/20150111_144401_zps838f0940.jpg
http://i264.photobucket.com/albums/ii196/Ricksil80/IMAG4114_zps9c4b0eec.jpg

http://i264.photobucket.com/albums/ii196/Ricksil80/20150107_171653_zps55e8d656.jpg

and I'd only be interested in 19'' wheels with +30 to +40 offsets even if I hadn't already found the Volks. I'd love nothing more than to trade them for a set of 19x10to 10.5'' Work VSXX in a +35 to +40offset. but that's a unicorn of a trade deal, not to be found on this forum.

[socals13guy]

legit wheels! glws!

[Rick-95ZE]

Bump for the weekend

[Rick-95ZE]

Sold pending pick up :)

[s14Art]

message length

[RickS14]

Thanks for the wheels Rick.