PDA

View Full Version : MD FS/FT: 1987 Mazda RX7 TurboII FC (S5 Conversion, Clean)


240obsessed
11-17-2014, 05:56 PM
So I've had this car for a while now but I'd like to test the waters here. She needs some attention from someone who is experienced with rotaries, not currently running.

1987 Mazda RX7 TurboII
120k miles on chassis, motor was apparently rebuilt and streetported 12k ago.

-Exterior was fully converted to Series 5 (tails, bumpers, etc)
-550cc Primary injectors, 680cc Secondaries, all 4 just cleaned and tested by MA Motorsports.
-Front over-fenders, 20mm
-Z32 Twin Turbo wheels (16x7.5 front, 16x8.5 rear)
-Greddy BOV
-Front mount intercooler setup
-Tokico Illumina adjustable rear shocks
-NGK plugs and wires
-All emissions equipment deleted with block off plates
-Aluminum CAS plate
-Quick-release steering wheel
-3" Downpipe
-3" TopSpeed P1 exhaust
-Vibrant air filter
-OEM glass sunroof (rare)

I've been cleaning the car up during my ownership. Certainly fun to drive when running correctly. She started acting up right before winter. First I changed the plugs and wires but it didn't help. I just tried different coilpacks as well but no change. Also I had all 4 injectors cleaned and tested at MA. For awhile she ran decently, however shortly after changing the injectors over the condition got worse and she will no longer stay running. I'm not convinced it's a blown apex seal but I don't have the time/money to diagnose it right now.

I'm looking for around $3000. Its an original Turbo II car, not just swapped. Make me an offer. Also interested in trades, anything basically. 240sx, Integra, 300ZX, etc.
Email or text at 443-616-7705.
Thanks!

https://farm8.staticflickr.com/7565/15377037334_647bc2dd90_b.jpg
http://zilvia.net/f/attachment.php?attachmentid=78272&d=1416278258
https://farm8.staticflickr.com/7548/15811906428_ece6f0f056_b.jpg
https://farm8.staticflickr.com/7501/15377037124_a2e1715c5e_b.jpg
https://farm9.staticflickr.com/8619/16638631876_dbf6d336c3_b.jpg
https://farm9.staticflickr.com/8651/16663175951_93cb68901a_b.jpg
https://farm9.staticflickr.com/8668/16476982068_b7a0bc10b9_b.jpg
http://zilvia.net/f/attachment.php?attachmentid=78273&d=1416278279

240obsessed
11-22-2014, 06:16 AM
BrapbrapbrapBump

Nova2373
11-22-2014, 10:15 AM
Bumpppppppp,,,,,,,,,,,

240obsessed
11-24-2014, 11:05 AM
Bump, may pull the motor soon if it doesn't sell.

240obsessed
12-11-2014, 11:54 AM
Last bump. Car is drivable; boost has been turned down to 5psi and idle bumped up to 1k. Starts, runs, drives fine, but you can tell it feels as if its only running on one rotor. Video can be provided.
New pics added as well.

240obsessed
02-19-2015, 04:58 PM
Bump. Information added.

240obsessed
02-21-2015, 07:49 AM
Negotiable on price, shoot me an offer. Need to move on.

SupaDoopa
02-23-2015, 08:26 PM
I wish this was a shell. ): Oh well. GLWS.

240obsessed
02-24-2015, 02:54 PM
I wish this was a shell. ): Oh well. GLWS.

I have a simple solution; buy it and sell the motor, now it's a shell lol

Thanks though haha

240obsessed
02-27-2015, 11:21 AM
Asking $3k OBO. Perfect for someone looking to do a swap. Buy the car, sell the motor and put your LS/2J/RB in. Or rebuild the rotary and be awesome. Either way make me an offer, I'm negotiable!