View Full Version : Isis 4inch tip blast pipes
oki_jamez
11-05-2014, 09:38 PM
So I ordered the Isis 4inch tip blast pipe exhaust for my SR'd hatch and I researched but I couldn't really find a good review on the pipes so can any one tell me from personal experience. Oh and I also bought the Isis test pipe.
s&tcustoms
11-12-2014, 07:24 PM
I have the 3 inch tip one, with a test pipe and its stupid loud, but the exhaust seems to be made really well and hangs up pretty tight with some new hangers.
R_Rod_s13
11-12-2014, 07:46 PM
It's going to be stupid loud just to let u know.. But they look good tho so that's always good aha
Renelovesnike
11-12-2014, 08:03 PM
There crazzy loud at higher RPM's and they fit perfectly snug and the catback is surprisingly heavy and the welds look good ass hell since there robotocly tig'd oh and your neighbors are gonna hate you if they dont do so already*
hows the ground clearance on them?
iRONDONkey
11-12-2014, 08:56 PM
i had the 4" exhaust tip. I had to get rid of it. it was way too loud.
that exhaust will SCREAMMMMMMMMMMMMMMMMMMMMMMMMMMMM
as for fitment, it sits pretty low. I paid extra to get it to sit higher. they had to cut off my rear tow hook from the drivers side, and weld on some new/shorter hangers to get it sit higher.
pacotaco345
11-12-2014, 10:00 PM
I just put it on my car, sounds great (sr with cams), pretty loud but I'd imagine way louder N/A. It does scrape a lot though where it dips around the subframe...
vipergtsr1000hp
12-04-2014, 07:57 AM
I had the 4in tips. Hanged low as hell especially near the subframe. Had to redo the hangars. Then again I know some people where theirs hug the chassis. Car was loud as crap with the ka24. Your neighbors will hate you lol. After swapping a sr20, it sounded much better and quieter.
Ra64mike
12-04-2014, 08:52 AM
I have a buddy with the 4 inch tips on his dual cam hatch, I can here him like 3 miles away
Mr.Doback
12-04-2014, 09:29 AM
On SR, its not too bad at idle. Anything beyond its pretty loud. Wide open throttle is ridiculous and raspy with no cat or anything else. My setup is pbm cobra to test pipe to 4" blast pipes and i actually don't like the sound it makes at wot with s14 sr and working vtc, its a bit too raspy. Considering adding a muffler to clean up the sound.
Exhaust hangs low on mine, but I also have pbm subframe risers so it appears even lower between subframe, need to get hangers redone since I can't raise it anymore with hose clamps. Be ready for cops to hear you as well.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.