locoluna825
11-03-2014, 08:45 AM
Everything has been kept in bags inside.
Items are located in Hesperia CA 92345
$1000 was spent on the PARTS alone for the rebuild. Asking $1500 for EVERYTHING and considering parting out separately.
Best way to contact me is by phone 760-713-5476 (Garrett) I work from Tuesday to Saturday. Please leave a message voicemail or text, Thank you.
Hello all, I've been a member with on zilvia for years. I've been gone for a bit. I started this project back in January of this year 2014 with my Uncle George in his machine shop, Arlington Machine in riverside CA. I joined the service and left for training in March. While I was away my uncle lost his battle to cancer, his shop was closed and our project never finished. I don't own the 240 anymore and I really need the money to fix my Tacoma.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_182258_zpsyobsbizy.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_182258_zpsyobsbizy.jpg.html)
Please see my Photobucket profile for photos, I have photos of the entire disassembly and reassembly (of what was finished) of the motor. Too many photos to upload onto this Ad
http://s1379.photobucket.com/user/locoluna8252/profile/
It was ran in my 1990 240sx for about a year from mid 2012 to mid 2013 until a compression check was performed revealing 40 psi on cylinder 4 and 80psi on cylinder 6.
http://i1379.photobucket.com/albums/ah130/locoluna8252/182289_183931034981410_4158810_n_zpssvkzelcz.jpeg~ original (http://s1379.photobucket.com/user/locoluna8252/media/182289_183931034981410_4158810_n_zpssvkzelcz.jpeg. html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20130912_165513_zps5i6iotnj.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20130912_165513_zps5i6iotnj.jpg.html)
Motor was removed and the bottom end was completed.
The block was cleaned and hot tanked, bored .40 over then honed. Block is reassembledNew 79.00MM forged Supertech pistons and rings. New Standard ACL rod bearings. New Nissan standard sized Main bearings. Crankshaft and rods were reconditioned. Includes; New Cometic Head gasket SET with 80MM MLS head gasket, New Nissan timing belt, New Nissan water pump, New Nissan oil pump.
Never made it beyond to the cylinder head. It still needs to be cleaned, resurfaced and vacuum tested.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172239_zpsptdnm8qj.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172239_zpsptdnm8qj.jpg.html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172310_zpsdf4aijvy.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172310_zpsdf4aijvy.jpg.html)
Engine includes; all sensors and electronics, manifolds, valve covers, oil pan, the original turbocharger. Nothing is missing.
Almost everything is here as a swap to install into a S13.
Engine, transmission, (KA24 transmission with RB20 bell housing, works with both RB20s and RB25's), Mckinney mount kit, 300zx Exedy clutch kit, lightweight RB25 flywheel,
(clutch and flywheel have around 100 miles, were recently upgraded before rebuild was needed), Custom one piece driveshaft, wiring harness, ecu, intercooler piping, Larger capacity s14 radiator, Hoses.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172234_zpskgtembg0.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172234_zpskgtembg0.jpg.html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_171919_zpsuhyhg3b6.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_171919_zpsuhyhg3b6.jpg.html)
Everything has been kept in bags inside.
Items are located in Hesperia CA 92345
$1000 was spent on the PARTS alone for the rebuild. Asking $1500 for EVERYTHING and considering parting out separately.
Best way to contact me is by phone 760-713-5476 (Garrett) I work from Tuesday to Saturday. Please leave a message voicemail or text, Thank you.
Items are located in Hesperia CA 92345
$1000 was spent on the PARTS alone for the rebuild. Asking $1500 for EVERYTHING and considering parting out separately.
Best way to contact me is by phone 760-713-5476 (Garrett) I work from Tuesday to Saturday. Please leave a message voicemail or text, Thank you.
Hello all, I've been a member with on zilvia for years. I've been gone for a bit. I started this project back in January of this year 2014 with my Uncle George in his machine shop, Arlington Machine in riverside CA. I joined the service and left for training in March. While I was away my uncle lost his battle to cancer, his shop was closed and our project never finished. I don't own the 240 anymore and I really need the money to fix my Tacoma.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_182258_zpsyobsbizy.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_182258_zpsyobsbizy.jpg.html)
Please see my Photobucket profile for photos, I have photos of the entire disassembly and reassembly (of what was finished) of the motor. Too many photos to upload onto this Ad
http://s1379.photobucket.com/user/locoluna8252/profile/
It was ran in my 1990 240sx for about a year from mid 2012 to mid 2013 until a compression check was performed revealing 40 psi on cylinder 4 and 80psi on cylinder 6.
http://i1379.photobucket.com/albums/ah130/locoluna8252/182289_183931034981410_4158810_n_zpssvkzelcz.jpeg~ original (http://s1379.photobucket.com/user/locoluna8252/media/182289_183931034981410_4158810_n_zpssvkzelcz.jpeg. html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20130912_165513_zps5i6iotnj.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20130912_165513_zps5i6iotnj.jpg.html)
Motor was removed and the bottom end was completed.
The block was cleaned and hot tanked, bored .40 over then honed. Block is reassembledNew 79.00MM forged Supertech pistons and rings. New Standard ACL rod bearings. New Nissan standard sized Main bearings. Crankshaft and rods were reconditioned. Includes; New Cometic Head gasket SET with 80MM MLS head gasket, New Nissan timing belt, New Nissan water pump, New Nissan oil pump.
Never made it beyond to the cylinder head. It still needs to be cleaned, resurfaced and vacuum tested.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172239_zpsptdnm8qj.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172239_zpsptdnm8qj.jpg.html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172310_zpsdf4aijvy.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172310_zpsdf4aijvy.jpg.html)
Engine includes; all sensors and electronics, manifolds, valve covers, oil pan, the original turbocharger. Nothing is missing.
Almost everything is here as a swap to install into a S13.
Engine, transmission, (KA24 transmission with RB20 bell housing, works with both RB20s and RB25's), Mckinney mount kit, 300zx Exedy clutch kit, lightweight RB25 flywheel,
(clutch and flywheel have around 100 miles, were recently upgraded before rebuild was needed), Custom one piece driveshaft, wiring harness, ecu, intercooler piping, Larger capacity s14 radiator, Hoses.
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_172234_zpskgtembg0.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_172234_zpskgtembg0.jpg.html)
http://i1379.photobucket.com/albums/ah130/locoluna8252/20141102_171919_zpsuhyhg3b6.jpg~original (http://s1379.photobucket.com/user/locoluna8252/media/20141102_171919_zpsuhyhg3b6.jpg.html)
Everything has been kept in bags inside.
Items are located in Hesperia CA 92345
$1000 was spent on the PARTS alone for the rebuild. Asking $1500 for EVERYTHING and considering parting out separately.
Best way to contact me is by phone 760-713-5476 (Garrett) I work from Tuesday to Saturday. Please leave a message voicemail or text, Thank you.