S13alldayyo
10-27-2014, 07:29 PM
Hey guys I've been building this car for 1 year so far and I have gotten ALOT done in only 12 months. With that being said I will post pictures and info in sequence from Wich I got the car unTill now
The shell
http://i.imgur.com/2GcOsYK.jpg
Sr swap that I threw on a isis manifold
http://i.imgur.com/TKdIry5.jpg
Doing the cody ace/Ka ac swap i came into a problem, I fixed it by cutting and reselling were the fitting is and extending the line
http://i.imgur.com/BZgEos1.jpg
Dropping in the motor to a painted bay on the shell
http://i.imgur.com/IXt32lP.jpg
Fit in just right with the wiring specialties fully tucked harness
http://i.imgur.com/yGxpJCO.jpg
Got it on the road
http://i.imgur.com/biF4pnt.jpg
This is when I decided to go full type x when I found this nose cut
http://i.imgur.com/8xl02gi.jpg
Best day ever lol
http://i.imgur.com/jEKhM5y.jpg
Tails were the next victim
http://i.imgur.com/sVaf9l2.jpg
Shortly after, the wing
http://i.imgur.com/f6zqPc6.jpg
Sideskirts
http://i.imgur.com/6BrM4AG.jpg
One piece driveshaft Cus my carrier bearing was bad
http://i.imgur.com/0cwfIJr.jpg
Got coilovers and front 30mm fenders
http://i.imgur.com/RHb7ZDI.jpg
Changed every single bushing in the car and all 4 ball joints, along with 5 lug swap and new stock brake setup. Supper long 3 days
http://i.imgur.com/vF6XTi3.jpg
Picked up some work equips
http://i.imgur.com/UBGox6L.jpg
Then it started to get interesting
http://i.imgur.com/H1u1XbF.jpg
This is the rear set done, the front set is almost done
http://i.imgur.com/PDbrsEz.jpg
Put them on and cut the fender in a split second lol, then placed an order on AIT 50mm fenders
http://i.imgur.com/zxFaKw2.jpg
Finally got the last piece to the type x puzzle
http://i.imgur.com/bA6SfHX.jpg
Skipping a few weeks this is the next update
http://i.imgur.com/Bl5kf8U.jpg
Okay so my ac was never cold during the day I would stil swear, I thought the clutch fan was not cutting it so I bought altima fans, as soon as I put them on the ac worked amazing. I highly suggest this mod
http://i.imgur.com/R3vCTk8.jpg
Getting close to recent, the car was dropped off to paint 3 weeks ago, should be back from the shop next week
http://i.imgur.com/u5bgdDe.jpg
While the car is being painted, I'm getting the front wheels done
http://i.imgur.com/eFSycJ5.jpg
While the car is at the shop I am gathering my 2871r kit
http://i.imgur.com/t0sz3cK.jpg
Garrett 2871r
Dif lines
Stock manifold with Tial c band wastegate
Nistune ecu and awhile bunch of extras
Will update again in 2 days!! Stay tuned
Sent from my iPhone using Tapatalk
The shell
http://i.imgur.com/2GcOsYK.jpg
Sr swap that I threw on a isis manifold
http://i.imgur.com/TKdIry5.jpg
Doing the cody ace/Ka ac swap i came into a problem, I fixed it by cutting and reselling were the fitting is and extending the line
http://i.imgur.com/BZgEos1.jpg
Dropping in the motor to a painted bay on the shell
http://i.imgur.com/IXt32lP.jpg
Fit in just right with the wiring specialties fully tucked harness
http://i.imgur.com/yGxpJCO.jpg
Got it on the road
http://i.imgur.com/biF4pnt.jpg
This is when I decided to go full type x when I found this nose cut
http://i.imgur.com/8xl02gi.jpg
Best day ever lol
http://i.imgur.com/jEKhM5y.jpg
Tails were the next victim
http://i.imgur.com/sVaf9l2.jpg
Shortly after, the wing
http://i.imgur.com/f6zqPc6.jpg
Sideskirts
http://i.imgur.com/6BrM4AG.jpg
One piece driveshaft Cus my carrier bearing was bad
http://i.imgur.com/0cwfIJr.jpg
Got coilovers and front 30mm fenders
http://i.imgur.com/RHb7ZDI.jpg
Changed every single bushing in the car and all 4 ball joints, along with 5 lug swap and new stock brake setup. Supper long 3 days
http://i.imgur.com/vF6XTi3.jpg
Picked up some work equips
http://i.imgur.com/UBGox6L.jpg
Then it started to get interesting
http://i.imgur.com/H1u1XbF.jpg
This is the rear set done, the front set is almost done
http://i.imgur.com/PDbrsEz.jpg
Put them on and cut the fender in a split second lol, then placed an order on AIT 50mm fenders
http://i.imgur.com/zxFaKw2.jpg
Finally got the last piece to the type x puzzle
http://i.imgur.com/bA6SfHX.jpg
Skipping a few weeks this is the next update
http://i.imgur.com/Bl5kf8U.jpg
Okay so my ac was never cold during the day I would stil swear, I thought the clutch fan was not cutting it so I bought altima fans, as soon as I put them on the ac worked amazing. I highly suggest this mod
http://i.imgur.com/R3vCTk8.jpg
Getting close to recent, the car was dropped off to paint 3 weeks ago, should be back from the shop next week
http://i.imgur.com/u5bgdDe.jpg
While the car is being painted, I'm getting the front wheels done
http://i.imgur.com/eFSycJ5.jpg
While the car is at the shop I am gathering my 2871r kit
http://i.imgur.com/t0sz3cK.jpg
Garrett 2871r
Dif lines
Stock manifold with Tial c band wastegate
Nistune ecu and awhile bunch of extras
Will update again in 2 days!! Stay tuned
Sent from my iPhone using Tapatalk