PDA

View Full Version : Ka turbo kit;GT30r downpipe IC;1.5 months old. pasadena,Ca

meme
07-16-2004, 09:56 PM
Was installed in a 1998 SE. been running about 1.5 months now. All parts were brand new when installed.

I can sell complete or without intercooler kit.

-Garrett GT30r
-Ka turbo manifold t25 flange
-sr20det outlet
-sr20det downpipe; Ka 02 sensor/bung installed
-Tial wastegate 38mm
-dump tube
-inverted oil feed fitting
--4 hose/ hose ends
- -4 fitting
-14mm—10 coolant fittings x2
- -10 hose end
- -10 hose
- -10 – ½ 45 deg oil return ftting
- -10 hose end/hose
-Goodridge fire sleeve -4 3ft
-Goodridge fire sleeve -10 3ft
- Greddy type-s bov
- Greddy 60mm EGT ; bung welded to the side of the manifold
-Hybrid s14 intercooler kit.
-ATP silicone hose
4”-3”
2.5” 90 deg
2.75”- 2.5 x2
2.75”- 3”
3”
2.5”

I think that is all. The car is in Pasadena, Ca . locals can come check it out. It will be ready first week of august. I will be out of town from Sunday to august.
Car ran great with no problems or leaks at all. In the pic I sprayed wd40, it is not leaking fluids.
$3700.

http://wasabigarage.com/img/pics/project/ka_turbokit/KA_turbokit.JPG
http://wasabigarage.com/img/pics/project/ka_turbokit/KA_turbokit_2.JPG
http://wasabigarage.com/img/pics/project/ka_turbokit/KA_turbokit_3.JPG
http://wasabigarage.com/img/pics/project/ka_turbokit/KA_turbokit_4.JPG
meme
07-16-2004, 10:11 PM
manifold and dump tube was not coated that is why it looks like that.

also the MAF and air filter is not included.


http://wasabigarage.com/img/pics/project/Kouki0002.JPG

http://wasabigarage.com/img/pics/project/s14/s14009.jpg

jimmy jvanavi[REMOVE]@wasabigarage.com
Zoom8112
07-16-2004, 10:37 PM
did you have to modify the rear of your front bumper to make that IC fit?
addicted2sp33d
07-17-2004, 08:46 AM
What's the Trim and A/R of the Turbo?

Thanks,
Peter
meme
07-17-2004, 11:00 AM
i had to trim the lower part of the front bumper openning. also had to trim the little mounting tabs for the plastic fender well. i didn't put on the bumper support. i tried to make it as clean as possible.

the turbo should have been the 25/40r. it has the 86 housing. the swing arm thing for the internal wastegate has been welded.
meme
07-25-2004, 03:01 AM
still for sale ; will sell the manifold, turbo,outlet pipe, downpipe by themselves
boost infested
07-25-2004, 11:34 AM
$150 for the tial?
1998cc
07-25-2004, 02:27 PM
How much do you want for the manifold, turbo,outlet pipe, downpipe?
GDubbs
07-25-2004, 08:17 PM
interested in the manifold. pm sent
zero.counter
07-25-2004, 08:27 PM
What is your asking price for each of the items separately?
meme
07-26-2004, 09:59 PM
What is your asking price for each of the items separately?


the manifold $350
greddy 60mm wht egt$150
outlet/downpipe$170 will come with bolts/studs. 02 bung is welded on the downpipe and comes with 02 sensor. all the bolts and studs came from atp turbo.

sorry the tail isn't for sale yet. it was only used less then 2 months.

i am also looking for a internal wastegate t28BB.
thanks
TakeTheTurns170
07-26-2004, 10:14 PM
How much for the turbo? Private message sent.