1991 S13 Coupe Shell Caged/Tubed! - 3000.00

[hobbs]

With winter approaching and lack of motivation, it's time to give up my project. Sad to see her go but it's at the wrong time in my life and I have other things that are more important to me. Car is located in Chicago IL, willing to ship, see below.

Quick rundown:
- 1991 SE with power options, clean title
- Caged and tubed chassis
- 5 lug swap
- Nismo powerbrace
- Circut sports tension, RUCA and traction arms
- SPL Toe arms
- J30 LSD with 5 bolt axles
- Aluminum subframe collars and solid diff mounts
- Walbro 255 intank pump
- Momo steering wheel with hub


About
The car is a 1991 SE with all power options with sunroof, it has a full NASA spec 6 point cage with single diagonal and the engine bay has been tubed by RedMist Automotive out in Gilbert IL. The tubs were made by hand and are NOT trailer tubs, they were made to give you the most space for accessories such as intercooler piping and an intake while having a ton of space for huge angle. Cage has been built to be as close to the chassis as possible, X door bars, dash bar and has been tied to the chassis and fully TIG welded. The sunroof glass has been been bolted in place via brackets and can be removed if wanted, all other sunroof components have been removed due to the clearance of the cage to the roof of the car. The cat hump has been cut out and replaced with sheet metal to provide the lowest seating position as possible and side mount seat brackets have been welded to the floor.

The car is free of any major rust and no damage other than door dings and the such over the years. Frame rails are in great condition and are not rusted, this chassis is super solid for anyone who is looking to make a track car. The car still retains power options including power windows and mirrors and heat, AC condenser is still there as well. Chassis harness has been pulled and I was in process of removing all the extra wiring for AC and the popup headlights as I was going silvia front. Please keep in mind that this car is very much still a project. Dash and door panels will need to be trimmed to fit the cage. Front brakes and BMC are not included.

The car is still located at RedMist and the engine bay will be primed before sale.

Extras included:
- HUD Dash
- Door panels
- Rear plastics
- Center console with shifter trim
- MSC interior plastics
- Extra heating components, ducts, heater core ect.


Price
I'm looking for 3000.00 for my shell with all of the extras listed, I can take off parts to bring the price down. To replicate the cage and tubs you're looking at over 2,000.00 in fab work and materials alone. Add in the cost of the shell and suspension bits and you see that my price is pretty fair considering what you are getting.

Shipping
I am willing to help ship the car anywhere in the united states, I have a broker that can setup shipping to about anywhere for a pretty decent price. Please note I will NOT do a shipped price, shipping is to be setup and handled by the buyer, I will simply help with the shipping process.

Pictures
Please note the car will not come with coilovers or the silvia hood.

http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_204948_RichtoneHDR_zpso88p80vw.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205019_RichtoneHDR_zpsthaurrcd.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205040_RichtoneHDR_zpstcgow1mh.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205055_RichtoneHDR_zpsqgekjuih.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205131_RichtoneHDR_zpsulisrgjk.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205155_RichtoneHDR_zpshg5el2wr.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205225_RichtoneHDR_zpscxlcxkg2.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205335_RichtoneHDR_zpsz49rbg9h.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205219_RichtoneHDR_zpsnbyfdscl.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205250_RichtoneHDR_zpshpn6m2pf.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205256_RichtoneHDR_zpsrh6ezywg.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205305_RichtoneHDR_zpszwuifpy7.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205317_RichtoneHDR_zpsunhjfes0.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205325_RichtoneHDR_zpsokfeowgf.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205505_RichtoneHDR_zpsekkihkho.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205512_RichtoneHDR_zpsjdekkvse.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205720_zpsnxzqgqoh.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205759_zpsuwv7mg2y.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205821_zpsjmqwsoph.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_205924_RichtoneHDR_zpsmtkbsoei.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_210725_zpsgqywgq1f.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_210758_zpsylygwvgr.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_210824_zpsby2xwwpx.jpg
http://i834.photobucket.com/albums/zz265/eskhobbs/Cleanout/coupe2/20141015_210835_zpsuind38bz.jpg

[Ohh!]

Is that fd in front for sale by any chance? Glws!

[hobbs]

Nope, another customers car. Bump!

[beems240sx]

Bump for Hobbs. Good friend and an honest guy. I used his broker to ship my car from Chicago to Phoenix without issue. I've also seen this car in person many times. I was always super jealous of the cage. It's probably the cleanest, most well built cage I have ever seen.

[yomisiu]

pizza sliced RUCA?

[hobbs]

Bump for Hobbs. Good friend and an honest guy. I used his broker to ship my car from Chicago to Phoenix without issue. I've also seen this car in person many times. I was always super jealous of the cage. It's probably the cleanest, most well built cage I have ever seen.

This guy, thanks homie!

pizza sliced RUCA?

I don't quite understand?

Willing to accept trades on this thing, anyone have a set of TE37s?

[hobbs]

Bump, offers/comments/questions?

[hobbs]

Bump, price drop to 2,500.00. Someone come grab this thing, still willing to trade for a set of TEs

[SnowJobRacing]

trade for a cbr 929 streetfighter?

[_tony_s13]

only worthy of being a track car??

[Nismo_Chris]

Hey Hobbs. Doesn't come with the silvia hood.. is the hood being sold separately or just not for sale? thanks man

[hobbs]

Going to be selling the hood, along with the rest of the silvia front end, once the car has been sold.

[s13killa]

If u wanna sell the hood let me know .

[hobbs]

trade for a cbr 929 streetfighter?

Shoot me a PM with some infor and pictures.

[hobbs]

Bump, willing to take parts off to lower the price. Shoot me an offer. I have a ton of crap that comes with the car from door seals, trim panels to bags of bolts and other miscellaneous shit.

[vplukas101]

dam this things cool! only thing cooler would be a real JDM silvia

[hobbs]

Bump, want this thing gone so I can move!

[hobbs]

Bump, still looking to offload this. I'm also interested in trades for TE37s, equips or RPF1s plus cash!

[hobbs]

Bump, still looking for a set of TE/CEs

[hobbs]

bumpity bump.

[ForeignMuscle]

After a long time out of a 240, this coupe is making my pants tight..

GLWS Hobbs.

[hobbs]

Bump, need this thing gone. Make me an offer.

[hobbs]

Bumpity bump.

[hobbs]

Bump, feel free to make me an offer on this.

[Hatemy7]

I love this car...I want it but without the tubes lol