RHD Master Cylinder Question

[JDMBart]

Hello,

I have a s13 with a rhd swap. I am in need of a new master cylinder. My question is where can i buy a new master cylinder that is for rhd? Thanks

[monks]

try 4xtoys out of alberta canada they have tons of rhd parts,
as well most people who bring in front clips should be able to help you out too.

[JDMBart]

try 4xtoys out of alberta canada they have tons of rhd parts,
as well most people who bring in front clips should be able to help you out too.

thanks for the tip, i couldnt find anything on their site but i will try to give them a call over the week.

[OutToWinPAHC]

Using a usdm s13 cmc in a r32 gtr... don't see why its different lines are on the same side

[Dolph_KYAS13]

91 non abs pathfinder BMC works

[e1_griego]

Yeah, pathfinder lines are on the opposite side. Bought one before I realized that's how they were routed.

OP, if you're interested in buying it off me, shoot me a PM.

[JDMBart]

91 non abs pathfinder BMC works

is there a pathfinder bmc that is 15/16 or are they all 1"?

[Matej]

You can find the 'RHD' master cylinders in Pathfinders, Frontiers, and various other Nissan trucks and SUV's.
They came in 7/8", 15/16", and 1". Go to a junkyard and chances are you will find at least one of each.

[JDMBart]

So all the Nissan pathfinder bmc are 1 inch diameter pistons. Am I going to notice a squishy pedal? My current bmc is 15/16

[e1_griego]

Upgrading in size makes for a stiffer pedal.

[JDMBart]

So you guys are sure if I buy this pathfinder BMC it will bolt right up and my brake lines will fit inside of it?

[Dolph_KYAS13]

https://farm4.staticflickr.com/3952/15450491529_9aab29e83b_c.jpg

Yep

http://www.carid.com/1991-nissan-pathfinder-brake-parts/centric-c-tek-standard-brake-master-cylinder-19147584.html

[JDMBart]

https://farm4.staticflickr.com/3952/15450491529_9aab29e83b_c.jpg

Yep

http://www.carid.com/1991-nissan-pathfinder-brake-parts/centric-c-tek-standard-brake-master-cylinder-19147584.html

buying this right now