venom2034
10-08-2014, 07:43 PM
Since I'm moving to an LS, I'm separating from my engine setup. I just put this together about 8 months ago and have since been driving the car everyday with no problem. The setup has seen no more than 10,000 miles. This setup made 400whp and is guaranteed to put a smile on your face when you hit full boost. I ran 20 psi daily and went as far as 24 without ever seeing knock. My focus on the build was to keep the stock manifold and do an external waste gate modification as recommended by our member here codyace. It wasn't done by him per say, but done to his specs.
https://farm4.staticflickr.com/3942/15487065105_4e212fd2dd_c.jpg
When I bought the turbo new, I chose the stock t25 style turbine housing for easy install. No modification had to be done or tial funny business. Although I wont include a dump pipe, any will fit and this bolts on easy. Gtx2867 /w .64 trim t25 style turbine exhaust housing. $1100
https://farm4.staticflickr.com/3953/15486944835_3d17d09b63_z.jpg
I added a bracket to hold the wastegate shut. I didn't want to run into problems later on with removing welds for whatever the case could have been.
https://farm6.staticflickr.com/5605/15300037579_14c022a07f_z.jpg
S13 red/black top (not type x) Apexi Power-fc L-Jetro with commander $650
Deautchwerks 810cc injectors $350
https://farm4.staticflickr.com/3949/15300285258_0f591cdd6b_z.jpg
Sr stock manifold with 38mm tial vband for external wastegate $250obo
This was painted before I mounted it on to the car. Some of the paint has flaked away.
https://farm6.staticflickr.com/5597/15486944625_4483562d2f_z.jpg
https://farm6.staticflickr.com/5598/15300361617_b86428f99c_z.jpg
Greedy Grex oil relocation kit. this is one of those rare jdm parts that are cool to have. Bought this from a friend two years ago. The picture was pulled from the internet but you can see the pic with my engine bay where the oil relocation is. It's to the left of the intake manifold. $200
http://www.clublexus.com/forums/attachments/sc400-300-classifieds/274346d1361892139-trust-greddy-grex-oil-filter-relocation-image.jpg
If any body wants to contact me, my phone number is 718-791-6418. Usually I'll answer within minutes but I'm at work in the morning and may walk away from my phone.
https://farm4.staticflickr.com/3942/15487065105_4e212fd2dd_c.jpg
When I bought the turbo new, I chose the stock t25 style turbine housing for easy install. No modification had to be done or tial funny business. Although I wont include a dump pipe, any will fit and this bolts on easy. Gtx2867 /w .64 trim t25 style turbine exhaust housing. $1100
https://farm4.staticflickr.com/3953/15486944835_3d17d09b63_z.jpg
I added a bracket to hold the wastegate shut. I didn't want to run into problems later on with removing welds for whatever the case could have been.
https://farm6.staticflickr.com/5605/15300037579_14c022a07f_z.jpg
S13 red/black top (not type x) Apexi Power-fc L-Jetro with commander $650
Deautchwerks 810cc injectors $350
https://farm4.staticflickr.com/3949/15300285258_0f591cdd6b_z.jpg
Sr stock manifold with 38mm tial vband for external wastegate $250obo
This was painted before I mounted it on to the car. Some of the paint has flaked away.
https://farm6.staticflickr.com/5597/15486944625_4483562d2f_z.jpg
https://farm6.staticflickr.com/5598/15300361617_b86428f99c_z.jpg
Greedy Grex oil relocation kit. this is one of those rare jdm parts that are cool to have. Bought this from a friend two years ago. The picture was pulled from the internet but you can see the pic with my engine bay where the oil relocation is. It's to the left of the intake manifold. $200
http://www.clublexus.com/forums/attachments/sc400-300-classifieds/274346d1361892139-trust-greddy-grex-oil-filter-relocation-image.jpg
If any body wants to contact me, my phone number is 718-791-6418. Usually I'll answer within minutes but I'm at work in the morning and may walk away from my phone.