S13CRAVE
07-13-2004, 01:34 PM
Well guys,
The day i've been dreading has finally come. I finally realized that I cant afford this right now. I need money for school expenses this fall and I have no money saved up. I'm gonna stay on the boards (maybe not as often) and hopefully get to start another project soon. So here is what is for sale.
THE MOTOR AND TRANNY~
Parts and Labor
• JE Forged Pistons(stock bore)
• Polished, forged and shotpeened rods
• New bearings
• Balanced, polished and knife- edged crank
• Cryo-treated block
• Head ported and polished
• Upgraded Valve Springs
• Skyline 65mm Throttle Body
• Stock cams
• Intake manifold ported
• 65 degree thermostat
• New oil pump
• New water pump
• Tomei 1.2mm metal head gasket
• New Headbolts
• CA18/SR20 Hybrid Transmission
• SPEC Stage 3 Clutch
• 300zx Oil Filter
• Butterflies removed from Intake Manifold
• Resurfaced flywheel
• Wire Harness converted for LHD 240sx and stock ECU
The internals have less than 3000miles on them (none by me). The clutch is brand new and will need the typical 500mile break-in. This motor has easily over $2000 in parts and labor and will be a great engine for anyone looking to go big boost. Seeing as a new motorset/clip goes for $1800-$2200 nowadays, this motorset will be for sale for $2850 obo. (I feel this is fair for a fully built motor seeing as it still costs less than a stock SR).
pics of the motor can be found @ http://www.cardomain.com/memberpage/421221
Other CA18/240sx Parts I have for sale are:
720cc injectors- $200
Z32 AFM w/ harness- $100
IHI RHC6 Turbo- $500
GReddy 3in Downpipe (NEW in wrapper)- $130
GReddy Dual Dragger 3in Cat-back(NEW)- $500 (retail is 600)
APEXi Air Filter(NEW in box)- $80
CUSCO Front Strut Bar(NEW, in wrapper)- $120
Hybrid AUS Intercooler and Piping(NEW)- $500
HKS SSQV(NEW in box)- $175
Heavy Throttle Aluminum Hotpipe with HKS flange(NEW)- $115
TIAL 38mm Wastegate(NEW)- $200
Samco Coolant Hoses(NEW)- $100
Tubular CA18DET Manifold w/ IHI flange- $250
KA24DE exhaust mani- $15
S13 KA24DE cams- $60
Stock alternator-$15
Anyone interested can e-mail me @ [email protected]
if you have any questions or offers. I will also be on AIM from time to time. My sn is Two4zeroSXTURBO
Thanks for looking guys, I hope this stuff can go to fellow board members, but if not then it will end up on e-bay.
Please e-mail me as I do not get a chance to check these boards much.
Thanks again,
-Ian
The day i've been dreading has finally come. I finally realized that I cant afford this right now. I need money for school expenses this fall and I have no money saved up. I'm gonna stay on the boards (maybe not as often) and hopefully get to start another project soon. So here is what is for sale.
THE MOTOR AND TRANNY~
Parts and Labor
• JE Forged Pistons(stock bore)
• Polished, forged and shotpeened rods
• New bearings
• Balanced, polished and knife- edged crank
• Cryo-treated block
• Head ported and polished
• Upgraded Valve Springs
• Skyline 65mm Throttle Body
• Stock cams
• Intake manifold ported
• 65 degree thermostat
• New oil pump
• New water pump
• Tomei 1.2mm metal head gasket
• New Headbolts
• CA18/SR20 Hybrid Transmission
• SPEC Stage 3 Clutch
• 300zx Oil Filter
• Butterflies removed from Intake Manifold
• Resurfaced flywheel
• Wire Harness converted for LHD 240sx and stock ECU
The internals have less than 3000miles on them (none by me). The clutch is brand new and will need the typical 500mile break-in. This motor has easily over $2000 in parts and labor and will be a great engine for anyone looking to go big boost. Seeing as a new motorset/clip goes for $1800-$2200 nowadays, this motorset will be for sale for $2850 obo. (I feel this is fair for a fully built motor seeing as it still costs less than a stock SR).
pics of the motor can be found @ http://www.cardomain.com/memberpage/421221
Other CA18/240sx Parts I have for sale are:
720cc injectors- $200
Z32 AFM w/ harness- $100
IHI RHC6 Turbo- $500
GReddy 3in Downpipe (NEW in wrapper)- $130
GReddy Dual Dragger 3in Cat-back(NEW)- $500 (retail is 600)
APEXi Air Filter(NEW in box)- $80
CUSCO Front Strut Bar(NEW, in wrapper)- $120
Hybrid AUS Intercooler and Piping(NEW)- $500
HKS SSQV(NEW in box)- $175
Heavy Throttle Aluminum Hotpipe with HKS flange(NEW)- $115
TIAL 38mm Wastegate(NEW)- $200
Samco Coolant Hoses(NEW)- $100
Tubular CA18DET Manifold w/ IHI flange- $250
KA24DE exhaust mani- $15
S13 KA24DE cams- $60
Stock alternator-$15
Anyone interested can e-mail me @ [email protected]
if you have any questions or offers. I will also be on AIM from time to time. My sn is Two4zeroSXTURBO
Thanks for looking guys, I hope this stuff can go to fellow board members, but if not then it will end up on e-bay.
Please e-mail me as I do not get a chance to check these boards much.
Thanks again,
-Ian