Log in

View Full Version : Gr2871r oil restrictor


S13alldayyo
09-22-2014, 10:49 AM
http://i.imgur.com/idiC65H.jpg
Is this a built in oil restrictor on the gt2871r?


Sent from my iPhone using Tapatalk

jamg
09-22-2014, 10:54 AM
doenst look like it.

it uses a .5mm sized restrictor

S13alldayyo
09-22-2014, 12:00 PM
So according to my searches of I get a -3an line I don't need a restrictor, If I get a -4an line I need a 0.40 restrictor, so Wich lines in the market offer -3 or -4 an lines?


Sent from my iPhone using Tapatalk

angel mkiv
09-22-2014, 12:09 PM
Ok to answer your main question on if that's a built in Restrictor then no.as for the -3 or -4 lines changing anything I'm not 100% sure but I do know they require .03" restrictors.

S13alldayyo
09-22-2014, 12:25 PM
How do I know if this is a built in restrictor, or if I need a restrictor per what an line I'm getting, this is confusijg


Sent from my iPhone using Tapatalk

S13alldayyo
09-22-2014, 12:26 PM
Angel I have you added on IG IM the guy with the widebody type x on work equip wheels


Sent from my iPhone using Tapatalk

S13alldayyo
09-22-2014, 12:28 PM
http://i.imgur.com/Wu1xoXs.jpghttp://i.imgur.com/GmOTMrM.jpg
Also what do you guys think about this, sorry about so many questions


Sent from my iPhone using Tapatalk

S13alldayyo
09-22-2014, 01:14 PM
Bump


Sent from my iPhone using Tapatalk

sil14zenki
09-22-2014, 01:33 PM
1.not a built in restrictor,
2.you need a .030"restrictor for the 2871r
3.looks like someone threw some jacks in there
heyyyyoooooooooooooooo

S13alldayyo
09-22-2014, 01:34 PM
It was checked by a shop and I personally called them to make sure about the turbo
, they told me turbo is in excellent condition


Sent from my iPhone using Tapatalk

Bleakley
09-25-2014, 07:09 PM
It was checked by a shop and I personally called them to make sure about the turbo
, they told me turbo is in excellent condition


Sent from my iPhone using Tapatalk

That compressor wheel is a little ouched, but it'll do. Not sure exactly of the discolored turbine section. If it doesn't have much/any shaft play, I would say run it.
As for a restrictor, not sure if that is a built in one, but if you do have to run one, I recommend DIF's 0.040" restrictor.

S13alldayyo
09-25-2014, 07:26 PM
I was going with the dif lines and restrictor, turbo has a barley noticeable shaft play, Wich basically every ball bearing turbo has, I blow into the charger pipe of the cold side and the blades spin, even with the softest blow of air with my mouth so I'm guessing turbo is good


Sent from my iPhone using Tapatalk

Bleakley
09-25-2014, 07:41 PM
Yep.
And sweet/good deal.

Road2Perfection
09-28-2014, 10:15 PM
My turbo shop said, built in restrictor in my 3071R, however that's for 4 Bar oil pressure, a jap engine makes far far more than that!