PDA

View Full Version : NC KA-T Part Out


Chris28
09-15-2014, 06:32 AM
Blew a head gasket, not worth fixing it with a swap so soon in my future. Parts prices and pictures are listed below. I think the head warped, The head gasket is probably reusable after having the head decked.

KA24DE Longblock - $800 oil pan to valve cover, less than 1k miles. ARP hardware throughout, Clevite bearings, K1 Rods, Wiseco 9.0:1 89.5mm pistons. Cosworth HG. Comes with alternator, new PS pump, water pump, etc. Pan has a -10 bung welded in. Pending

s13 Megasquirt PNP - $800. I can include the wiring harness if you want. Tuned at National Speed in Wilmington NC, that's why I'm asking new MSPNP price. Comes with IAT sensor, bluetooth adapter, diypnp boost control solenoid, and the trigger disc for the dizzy. I never used the trigger disc so it's still in the box. SOLD

Top feed fuel rail for 11mm injectors - $100 SOLD
Delphi 1000cc injectors - $250 SOLD
Comp Clutch white bunny 6 puck clutch with flywheel - $200 SOLD
Skullworks KA oil block - $150 SOLD
Turbonetics Raptor BOV - $40 SOLD
FMIC piping - $20...it's probably more trouble to ship than it's worth, but the cold pipe has the IAT bung and BOV flange welded on. SOLD
Turbo (Precision 5431e, .48ar exhaust housing) - $500 SOLD
Manifold, downpipe, wastegate (Tial MV-S 38mm) - $500 SOLD
s13 KA/SR Shaftmasters 1 piece steel driveshaft - $225 SOLD
Small intercooler + piping - $60 SOLD


Pictures:

http://distilleryimage9.ak.instagram.com/c90e9d4cb1d911e395fb12413a0078ad_8.jpg
http://photos-d.ak.instagram.com/hphotos-ak-xfp1/10488765_1524765914412219_1243715104_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/s720x720/1174679_10151906600069935_65224876_n.jpg?oh=397159 9deff3c026ee3c83d8b0a77455&oe=54868094
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/s720x720/9700_10151906600029935_2050827951_n.jpg?oh=8509d11 2fb2703d8af3416e8472d8cb7&oe=54C98F27&__gda__=1422803147_83ecd70e172ad9935e763723586086a 0
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/q83/s720x720/1234783_10151906600044935_2142967258_n.jpg?oh=19e2 78b606d6e370e7766337b16d7bc4&oe=5497D4B0&__gda__=1422864438_14bab670b1e7629162abfa0cc35b8d4 b
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/295613_10151555391944935_934957068_n.jpg?oh=70b927 6f01186d9d08c0544dece2ce94&oe=5493C511&__gda__=1417869250_d001824b0f9a98c2709c8f48ec9a64b 6
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/p180x540/395745_10150612851914935_447251219_n.jpg?oh=2d0665 35d069f635624ef572a027453b&oe=54CF10E9&__gda__=1418578327_6ba341ddcfdd63c4c82cd93c1595628 7

Fuel rail:
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10402446_10152714795199935_8132410380903999797_n.j pg?oh=b935bd14f798033b16d6fb4da85f3b55&oe=5491B9DC&__gda__=1419496889_85beb7069922cdc564eba56679cea16 1

Turbo/downpipe placement:
https://scontent-a-atl.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/r270/10665816_10152714796054935_1178044280171186977_n.j pg?oh=20ffe02561cddfd8d8df9a5e0ec648e5&oe=548D5BB0

Small intercooler (comes with 2.5" to 3" adapter couplers):
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/1978751_10152714794939935_7571906727246515766_n.jp g?oh=2372274e5ffc149756512ae7c44d5706&oe=54826644&__gda__=1417834107_a0983b0f68743105fe13e1e584ed22c 2

Cold pipes closeup:
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10347240_10152714796399935_8555310158023463528_n.j pg?oh=f074165bdb3f1e976c2f1c0529c89701&oe=54873666&__gda__=1418940626_10a9f6a42b60c7336363b9987ae78ab 2


All prices are OBO, really just trying to recoup some money before pulling the trigger on a new engine setup. If I didn't list anything just ask, things like transmission, intake mani, etc are all for sale so just make me an offer. Everything is located in Raleigh NC, Easiest way to contact me is by call or text at 757-788-9847 or email me at [email protected]

-Chris

vinnyjdm
09-15-2014, 08:26 AM
price for the oil pan shipped to 60502

Chris28
09-15-2014, 08:44 AM
I'd rather not separate the oil pan from the rest of the engine, trying to sell it as a complete longblock. Sorry.

bmaddock
09-15-2014, 08:48 AM
I have a few friends who have told me about your KA-T build. If the Megasquirt is still around a few months from now I'll be interested. Need to buy some other things first.

GLWS

Chris28
09-15-2014, 10:56 AM
Thanks, I'll let you know if the MS sells.

anti tyler
09-15-2014, 02:13 PM
What manifold is it, only the picture of the turbo shows up

Chris28
09-15-2014, 10:07 PM
It started out as a bottom mount t2 mani, i cut the t2 flange off and had a t3 flange welded on, then an external wastegate port was added. It's essentially a top mount t3 manifold with better turbo placement than most other manifolds. Downpipe was made at the same time, I'd like to sell them together since they fit so nicely.

https://scontent-a-atl.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/s720x720/405930_10150522725446185_353506141_n.jpg?oh=5ccbc3 433391bb0d65fda9410ee09d47&oe=548BF177

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/s720x720/409071_10150522722846185_689785938_n.jpg?oh=c7109e 5bb38404c5533f8a2f29f8460a&oe=54835CC7&__gda__=1417945094_126804ae3d011e9eec9ba38fd35ed7b 9

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/v/t1.0-9/559432_233098136844957_577231851_n.jpg?oh=da67eb0b 0680c9c82f084a55ebd6f8eb&oe=548B0031&__gda__=1417868142_d6a8fae14f35480c1af24ef331b2094 a

Cjkouki2010
09-15-2014, 10:12 PM
I can slap that clutch in, running na ka24de and be straight right? I know kinda retarded question but anyway I'm interested

Chris28
09-16-2014, 06:23 AM
Yeah, it'd work fine. It's an rb25 flywheel and a 6 puck 350z clutch, it'd be overkill for an NA KA but it shouldn't ever slip.

Original post edited to reflect what's sold.

Cjkouki2010
09-16-2014, 09:29 AM
Ok cool, whats the main reason for the flywheel? Why u running rb25

Chris28
09-16-2014, 09:55 AM
It's a bigger flyhweel than stock, lets you use a 250mm disc vs the 225mm stock size. Those may not be the exact numbers but it's bigger than stock. 350z clutch is the bigger size so it just lets you run a 350z clutch on the KA. Google "White Bunny Clutch," it's a common swap.

abcdefg123
09-16-2014, 10:34 AM
Intercooler piping to 33334

Chris28
09-16-2014, 12:41 PM
Piping is set up for a flipped fmic, I was using a generic jdmsport intercooler and it worked fine. Fmic is trash but I have a smaller core I was going to use as a high mount/mid mount setup, I'll do that smaller core+piping for $60. Otherwise I'll get a shipping quote on just the pipes tomorrow.

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/1243110_10101656586624143_1872186405_o.jpg

I'll take pictures of the smaller intercooler tonight and add them to the first post. Driveshaft was also added to the first post.

Chris28
09-16-2014, 10:04 PM
Pictures and parts added to original post.

Chris28
09-18-2014, 01:25 PM
Bump, all turbo parts sold.

Still have the block. Comes with everything from the oil pan to the head, all accessories, distributor, plug wires, coil pack, and everything else that I don't need.

GetMyDrift?
09-22-2014, 09:26 AM
I'd like to buy the distributor and cap please. I will pm you.

Chris28
10-06-2014, 04:41 PM
Sorry, distributor is going with the engine. Engine is pending sale, this part out went better than expected.

anti tyler
10-06-2014, 07:21 PM
Are you parting the car out or just motor stuff? I need small things like tcu and wiper amp. So send me a PM if you are parting those out,

Chris28
10-06-2014, 08:05 PM
Just the motor setup.