Massive high hp sr20 partout, brian crower stroker, mazworx, os giken.

[enriquetc240]

I will try and detail to the best of my knowledge the parts, if you see something in the pictures that I did not list and would like, please feel free to let me know.

I HAVE DECIDED TO PARTOUT, so please message me to purchase before the parts sell. Parts are now first pay first serve. Thanks

I can be reached via text @ 305-923-1260 (7AM-1AM est)

I will ship anything at the buyers expense.

NEW PICTURES HAVE BEEN ADDED AND PRICES HAVE BEEN LOWERED! (9/24/14)



Mazworx built cylinder head with Brian crower cams SOLD

Supertech Nissan 6mm Exh guide, Mang. Bronze (7mm to6mm conversion)
Supertech Valve Guide Intake Nissan SR20 6 mm stem Manganese Bronze
Grinded Rockers for Dual Guide Conversion
Valve Job, Race (per valve)
Supertech Intake Valve Stem Seal
Supertech Exhaust Valve Stem Seal
Supertech Titanium Retainers
Ferrea Valve Locks, Nissan
Supertech Intake Valve, +1mm, SR20
Supertech Exhaust Valve, +1mm, 6mm Stem,SR20
Suppertech Dual Valve Spring, SR20DE/DET,116lbs
Brian Crower 270 size Cams
Hydraulic lifters


CP pistons (unaware of the compression ATM, 1000miles) SOLD


This turbo manifold and downpipe are mated for a precision turbo with a v band discharge with a 38mm wastegate flange vented

NEW ITEMS ADDED:


Apexi GT Spec Exhaust 3.75" (it has been cut half way for shipping, and will be cut once again to ship to the buyer, rare and nice exhaust) SOLD

Stainless steel turbo oil lines with fittings $60 NOW $40



SOLD PARTS:

SR20 S13 Valve cover with AN bung welded, An hoses and hose ends, Oit catch can, The complete oil catch can system pictured. SOLD
Mazworx sr20 intake manifold with fuel rail and q45 TB SOLD
Injector dynamics brand new 2000cc injectors SOLD
ATI sr20 engine damper with power steering crank pulley SOLD
Moroso oil pain sr20 SOLD
Mazworx timing chain tensioner SOLD
AEM EMS series 2 ECU SOLD
Brian Crower stroker bottom end: SOLD
Tomei oil cap SOLD
Precision 40mm wastegate SOLD
S13 SR20 -16AN custom water outlet (this is both the water inlet and outlet to the motor with -16AN bung welded to run AN hose for the radiator. also has a 1/8npt fitting on the thermostat side) SOLD
Chase bays power steering lines kit, comes with PS pump, Aluminum reservoir and AN hoses and lines. SOLD
S13 sr20 non abs one piece driveshaft steel SOLD
OS giken sr20det transimission with the "os giken gearset" SOLD
Manley turbo tuff Rods (40 miles)SOLD
Circuit sports steel braided clutch line (new in bag) SOLD
Mishimoto S line intercooler SOLD
Doc race tubular turbo manifold for T3 with corresponding downpipe SOLD


http://i13.photobucket.com/albums/a263/enriqueonnos/IMG_0140_zpsc5df1793.jpg (http://s13.photobucket.com/user/enriqueonnos/media/IMG_0140_zpsc5df1793.jpg.html)

[boniomario]

Everything I've been looking for under one thread !!! GLWS we will be in touch


Sent from my iPhone using Tapatalk

[sil15yaz]

Damn if only u post it last january[emoji24][emoji24][emoji24]

[StrokedS13]

I'll be your buyer for the intake manifold/fuel rail./throttle body setup!

[YOSHIKOUKI]

^^^^ if he doesn't buy I certainly will lmk

[JDM king240]

where can i find those radiator hoses

[Bleakley]

Edit: must... not... spend... money...

[enriquetc240]

Well as I imagined there are tons of interest.
Intake manifold is called for.
Transmission is called for.

BTW, If we can get the Bottom end, cylinder head, and EMS sold I will start parting out shipping parts immediately.

[doxie]

The injectors are 11mm or 14mm bore am interested in buying them

[doxie]

Am interested in the injectors an ATI damper kit what's the best price

[enriquetc240]

Am interested in the injectors an ATI damper kit what's the best price
Injectors are 14mm. still in the sealed bag.

I will ship the injectors and/or the ATI for free within the US.

[enriquetc240]

I figured this might help:
I already have potential buyers for the following parts:

Power steering setup
Radiator with all AN lines and hoses
Injectors and ATI damper
OS giken transmission
Intake manifold


Lets get a couple more things ready to sell so I can start taking payments and shipping parts.

[Halfamazing]

What size bore are the CP pistons of unknown CR ?

[enriquetc240]

What size bore are the CP pistons of unknown CR ?
Just found the piston configuration
86.5mm 8:5:1

[Mike - E]

texted u GLWS

[thizzen4]

Do u still have mazowork intake manni set up pm am asap have cash

[thizzen4]

650 ready to paypal for the intake manni shipped to 98407

[speedgod^s13]

650 ready to paypal for the intake manni shipped to 98407

You've got a couple of people in front of you, including myself wanting it.

[rollinsstewart]

Ill take the chain tensioner and a couple other smaller parts if you decide to part her out

[moowee240]

If yall would have read first the major components need to be sold or spoken for before he parts out all the goodness.. because honestly who wants to be stuck with a fully built block and a head.. least he still has the ability to have it driving.. somebody buy that sweet block and sick head..

[enriquetc240]

Well the time has come.
I have decided to part ways with this setup as I truly feel I need a change of scenery.

I have contacted everyone who had "dibs" on the first items and I am awaiting payment.
As soon as I receive payment I will be listing them as sold
These are the only parts I have reserved, everything else is available.

Power steering setup
Radiator with all AN lines and hoses
Injectors
ATI damper
Moroso oil pan
OS giken transmission
Intake manifold



Please make sure to shoot me offers on the cylinder head and BC motor as I need to help fund my new project.

[StrokedS13]

Well the time has come.
I have decided to part ways with this setup as I truly feel I need a change of scenery.

I have contacted everyone who had "dibs" on the first items and I am awaiting payment.
As soon as I receive payment I will be listing them as sold
These are the only parts I have reserved, everything else is available.

Power steering setup
Radiator with all AN lines and hoses
Injectors
ATI damper
Moroso oil pan
OS giken transmission
Intake manifold



Please make sure to shoot me offers on the cylinder head and BC motor as I need to help fund my new project.

Did not get a PM from you, thought i called first dibs on the intake mani.....

[enriquetc240]

Did not get a PM from you, thought i called first dibs on the intake mani.....

Its yours. I just owe your pictures!

[enriquetc240]

I have added new parts and new pictures!!

Everything is a first pay first serve basis now.

[enriquetc240]

Intake manifold sold.

[YOSHIKOUKI]

Damn it

76060

[speedgod^s13]

Let me know if the buyer for the power steering set up doesn't come through.

[enriquetc240]

Let me know if the buyer for the power steering set up doesn't come through.

He has not come through, you can PM me if youd like to purchase.

UPDATED:
ATI DAMPER SOLD
ID INJECTORS SOLD

[EsChassisLove]

Pics of the ACT twin plate please, thanks!

[enriquetc240]

Pics of the ACT twin plate please, thanks!

I have just added pics of the clutch to the main post.


Also added copies of the invoices for the cylinder head work by Mazworx.

[EsChassisLove]

How's the pressure plate and flywheel look after the 40 miles?

[enriquetc240]

How's the pressure plate and flywheel look after the 40 miles?

Almost the same as it did when i unpacked it.

I honestly think the only way you could notice it is used, is from marks from the installation. lol

[richmond82]

Precision 40mm wastegate $100

are you interested in anything in Trade? if not thats ok still interested

Maxwork timing chain tensioner, I have a S15 SRDET- would the maxworx one work for me? I looked on their site but nothing specific for model applications. Minus FWD vs RWD. I can paypal you on this today

[enriquetc240]

Ive gotten back to all Pm's

Things are selling quicker than I thought.

Help me find these parts a new home!

[enriquetc240]

Bump bump bump

[enriquetc240]

The brian crower bottom end is pending.

other parts sold have also been updated in the main post.

Shoot me some offers guys.

[enriquetc240]

Turbo manifold setup and downpipe are back up for sale.

Buyer backed out after making the payment.

Please guys I ask of you, if you decide to purchase make sure of all your responsibilities first. There are guys who are truly interested in purchasing parts waiting in line.

Thanks!!

[enriquetc240]

BUMP. Lets get the rest of these things sold here before they sell on ebay!

[enriquetc240]

I have lowered the prices, added new pictures and added the driveshaft!!

[ProjectPanda13]

Any pictures of the power steering setup?
Latez,
-Dave

[enriquetc240]

Stroker bottom end has been sold.

[enriquetc240]

BUMP!!!! keep the interest coming.

[enriquetc240]

ACT twin disk has been sold.

[doxie]

Precision 40mm wastegate what size of spring I need it ASAP is it sold or available

[enriquetc240]

Precision 40mm wastegate what size of spring I need it ASAP is it sold or available

I still have the wg, and I have all the springs for it.
Text me

[enriquetc240]

Just updated the main post with what has sold.
The only things I am missing to sell off are:

SHOOT ME SOME OFFERS GUYS!


Apexi GT Spec Exhaust 3.75" (it has been cut half way for shipping, and will be cut once again to ship to the buyer, rare and nice exhaust) $400 NOW $300

Stainless steel turbo oil lines with fittings $60 NOW $40

Circuit sports steel braided clutch line (new in bag) $20 NOW $10
Mishimoto S line intercooler $150 NOW $100

[enriquetc240]

Good afternoon bump

[enriquetc240]

Bump bump bump!

[Halfamazing]

Will take the Circuit sport SS clutch line shipped to 89128. Pm me payment info. Thanks

[enriquetc240]

the cylinder head is still available.

[b.series]

Do you have any closeup pics of the manley rods? VERY INTERESTED!!!!!!!!

[enriquetc240]

The cylinder head is still available and I am now practically giving it away!

[enriquetc240]

Noone building themselves a nice SR that need a head?

[frost1988]

Ill take the head.pm me.Block for sale aswell?

[Perfect Balance]

Interested in the cp pistons, but need to know the bored and comp ratio.

Edit: never mind found it.

[enriquetc240]

Head and pistons have been sold.