koni yellow ground control s13 help

[streetracer8x]

Im working on a koni yellow with ground control setup all around. Im wondering where to wield on the lower spring seat since i cant afford vielside 180sx strut housings. Anybody have any ideas

[SlpAngl]

Generally you don't need to do any welding... Trim the factory seat just about the weld off, then the supplies sleeve slides down & over it with O rings & should sit on top of it. If you're getting wild or cut the factory seat entirely off including the welds somehow, just tack it on where the seat was previously.

[SlpAngl]

If that doesn't answer your question, post some pictures so I can see what you're doing here. Not sure I fully understand what you're up to lol.

[streetracer8x]

If that doesn't answer your question, post some pictures so I can see what you're doing here. Not sure I fully understand what you're up to lol.

Ive got almost everything to swap them in my car. Just got my pillowball camber plate mounts in today. So tomorro i plan on rippin out my front struts tomooro to start putting everything together

[e1_griego]

Veilside housings are for koni 86 series shocks, not yellows.

Quick google search: http://driftninjaz.com/blogthis/?p=12