brokeAs240sx
09-09-2014, 05:17 PM
Lots of spare parts I no longer need. Only what is listed below is available. Only looking for cash, no trades. Pick up is available around the Orange County, CA area. Shipping is possible for smaller items if buyer covers shipping/paypal. All offers should be through PM, thanks.
Once a deal has been made & pick up arranged, we will exchange phone #'s.
Nismo 60mm extended studs - studs only S14 or Attain Hub front & S13/S14 rear hub - changed out to ARP studs since I have to run a much larger spacer. $80 for all 20. $95 shipped.
Doesn't show all 20 studs in image, but you will get all 20 :) .
https://farm4.staticflickr.com/3907/14322476840_2fb73c4183_z.jpg
Z32 1 1/16 brake master cylinder with fittings for S13/S14 - Works fine. Part of the reservoir is painted with high temp paint to help w/ heat protection. Also have a couple temperature sensitive stickers on the reservoir for fun. Asking $150 picked up. $170 shipped.
https://farm6.staticflickr.com/5514/14322543148_c35fedc33d_z.jpg
https://farm6.staticflickr.com/5273/14322815728_800372a216_z.jpg
5 lug front z32 brembo rotors - looks fine. $20 picked up - sorry, don't wanna ship these.
https://farm6.staticflickr.com/5477/14509134725_bcb7802475_z.jpg
S14 HKS Muffler Exhuast - current cut right around the rear of the transmission area - you'll need to fab from the header --> exhaust. 3" inlet. ~4" muffler tip.
Normal dings/dents for a used exhaust, everything worked fine when pulled. $80 picked up.
https://lh4.googleusercontent.com/-SO52f6vLDFI/Uwg9sGr_gVI/AAAAAAAAOTc/Q3SGRycSy5k/w638-h851-no/IMG_20140221_172754.jpg
https://lh4.googleusercontent.com/-aIyPIg8_TVc/Uwg92w4cyyI/AAAAAAAAOTo/FQhYNaUqLQs/w638-h851-no/IMG_20140221_172806.jpg
SR (or S14 KA) Trust/GReddy downpipe. 3" outlet, 2.75" (approx) inlet. Dented, but works fine. $60 picked up.
https://lh6.googleusercontent.com/-UglvCVgS9jE/Uwg-3sSpIeI/AAAAAAAAOUk/DhRzWEZFnz4/w638-h851-no/IMG_20140221_173146.jpg
https://farm7.staticflickr.com/6065/6061071508_76e692ac5e.jpg
Once a deal has been made & pick up arranged, we will exchange phone #'s.
Nismo 60mm extended studs - studs only S14 or Attain Hub front & S13/S14 rear hub - changed out to ARP studs since I have to run a much larger spacer. $80 for all 20. $95 shipped.
Doesn't show all 20 studs in image, but you will get all 20 :) .
https://farm4.staticflickr.com/3907/14322476840_2fb73c4183_z.jpg
Z32 1 1/16 brake master cylinder with fittings for S13/S14 - Works fine. Part of the reservoir is painted with high temp paint to help w/ heat protection. Also have a couple temperature sensitive stickers on the reservoir for fun. Asking $150 picked up. $170 shipped.
https://farm6.staticflickr.com/5514/14322543148_c35fedc33d_z.jpg
https://farm6.staticflickr.com/5273/14322815728_800372a216_z.jpg
5 lug front z32 brembo rotors - looks fine. $20 picked up - sorry, don't wanna ship these.
https://farm6.staticflickr.com/5477/14509134725_bcb7802475_z.jpg
S14 HKS Muffler Exhuast - current cut right around the rear of the transmission area - you'll need to fab from the header --> exhaust. 3" inlet. ~4" muffler tip.
Normal dings/dents for a used exhaust, everything worked fine when pulled. $80 picked up.
https://lh4.googleusercontent.com/-SO52f6vLDFI/Uwg9sGr_gVI/AAAAAAAAOTc/Q3SGRycSy5k/w638-h851-no/IMG_20140221_172754.jpg
https://lh4.googleusercontent.com/-aIyPIg8_TVc/Uwg92w4cyyI/AAAAAAAAOTo/FQhYNaUqLQs/w638-h851-no/IMG_20140221_172806.jpg
SR (or S14 KA) Trust/GReddy downpipe. 3" outlet, 2.75" (approx) inlet. Dented, but works fine. $60 picked up.
https://lh6.googleusercontent.com/-UglvCVgS9jE/Uwg-3sSpIeI/AAAAAAAAOUk/DhRzWEZFnz4/w638-h851-no/IMG_20140221_173146.jpg
https://farm7.staticflickr.com/6065/6061071508_76e692ac5e.jpg