Silvia479whp
08-19-2014, 12:12 PM
brand new AEM Infinity 10 for sale $2650 obo
text me 559 2104964
located in porterville, ca
paypal only
INFINITY OVERVIEW
The Infinity ECU delivers state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. However, we have now made this technology affordable for both professional race teams and amateur racers. Built around a latest-generation 200MHz automotive processor, the Infinity ECU is capable of processing 400 MIPS (millions of instructions per second) and is perhaps the fastest ECU available today.
For a limited time, all Infinity ECU’s come fully enabled, without the need for feature add-on purchases. Combined with AEM’s industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.
Airflow model based (VE) tuning
ECU Set Up Wizard simplifies start up
Flex fuel compatible
Multi fuel capable
Drive by wire
Variable valve control
Multiple boost control strategies
Nitrous control
Map switching
Dual internal Lambda controllers
Dual knock sensing circuits
Data logging up to 64GB, up to 100 channels at 1KHz
Outputs to 3rd party dashes and data loggers
Industry leading data transfer speed (up to 480Mb/sec)
Integrated engine protection strategies
Sealed enclosure and IP67 rated comms ports
AIRFLOW MODEL BASED CALCULATIONS
Infinity’s airflow model based systems greatly reduce the amount of time it takes to set up and tune an engine by eliminating many of the lookup and trim tables (correction tables) necessary in previous generation ECUs. The Infinity’s airflow based, or volumetric efficiency (VE) based models calculate an engine’s requirements in real time based on an advanced algorithm that has various modes for calculating air flow. Once the user inputs an engine’s basic parameters (displacement, cylinders, ignition type, and firing order) and methods of calculation for airflow and ignition they can begin setting the engine’s VE table in the software.
InfinityTuner USER INTERFACE SOFTWARE
InfinityTuner is optimized for speed and performance. The software has the power to control a multitude of features found in today’s modern racecars, and features an advanced tuning Wizard to reduce set up time. An ECU Setup Wizard takes complex calibration setup work and simplifies it through a smart interface that features tabs for quick set up of vital engine functions. Each tab includes a description of the function.
InfinityTuner software is highly flexible. It allows you to choose from multiple strategies for boost control, idle control, traction control, charge air temp blend, launch control and more.
All controls in the Infinity ECU are synched to logged data which allows users to edit calibration data during log playback to minimize tuning time. AEMdata, AEM’s advanced data logging analysis software is also included for reviewing data logs.
ULTRA-HIGH RESOLUTION FUEL CONTROL
The Infinity ECU calculates injector pulsewidth in units of 1/10th of a microsecond (0.0000001 second). Individual cylinder fuel trim is included and user adjustable.
ACCURATE IGNITION TIMING UNDER ANY CONDITION
InfinityTuner software features a 3D ignition trim map (coolant and air temp based), and its back-end timing code is tested to 100,000 RPM. Individual cylinder ignition trim is included.
FLEX FUEL COMPENSATION
Flex fuel compatibility is included, and the Infinity is able to make automatic adjustments for ethanol content in the fuel with the addition of an ethanol content sensor (sold separately).
MULTI-FUEL CAPABLE
The Infinity has the ability to run two separate fuel types simultaneously through staged fuel injection
DRIVE BY WIRE CAPABILITY
The Infinity-6/8h ECU can control one drive by wire throttle body and includes auto calibration for DBW sensors. It includes idle control, an optional drive by wire rev limiter (for use as a launch limiter, holding limiter or in conjunction with other rev limiters) and necessary failsafes based on redundant sensor inputs. Traction control via drive by wire will be added in the future at no additional cost for existing Infinity ECU owners.
IDLE CONTROL
The Infinity ECU uses a coolant temp based idle control model. It includes an RPM vs. Engine Speed Rate idle decel feature that provides accurate control of the IAC and allows for adjustment of engine braking. The Infinity’s idle TPS offset provides smoother low idle operation when necessary, like driving in the pits or return lane following a pass.
MULTIPLE BOOST CONTROL STRATEGIES
Choose from time, gear, vehicle speed, switch based or other boost control strategies. The Infinity’s boost control includes two 2D base duty tables and two 2D boost target tables. The second tables can be used as a trim, and users can choose from multiple strategies including IAT, MAP, Baro (kpa), throttle %, flex fuel content, boost target and more. Please visit our Forumfor an in depth review of the Infinity’s boost control capabilities.
NITROUS CONTROL
The Infinity’s software allows you to run a single-stage wet or dry nitrous set up (four-stage available soon). This feature includes nitrous timing delay to account for nitrous bleed out, and can be set up for water/methanol injection tuning. Four stage nitrous will be upgraded for free for existing Infinity users when it becomes available.
VARIABLE VALVE CAM CONTROL
Set base duty, limit and VVC cam target for up to four cams through the InfinityTuner Wizard. Users are able to achieve a VVC cam target by setting Cam 1 base timing and base duty cycle % in a 2D table, and the software features a 1D base duty % table that controls the base duty cycle for the VVC output, which is tunable based on the VVC target.
MAP SWITCHING
The Infinity includes up to four separate ignition maps, four separate Lambda maps and two separate VE maps with independent values. Using AEM’s 12 Position Trim Pot, this powerful feature delivers many valuable tuning options including:
Multiple maps for multiple track conditions (practice map, rain map, qualifying map, FTW map)
Change boost target
Change Lambda target
Change ignition target
Tie boost, Lambda and ignition targets together and change them all
Ideal for test mapping during tuning
Change boost base duty
Control PWM switches (like water/methanol injection)
Choose between 2 VE tables for VVC or when restrictors are in place
Blend between flex fuel ignition maps
Blend by cam position and gear
ENGINE PROTECTION
Multiple engine protection strategies are incorporated into the Infinity ECU. Available strategies include:
MAP (create limp mode using Assumed Pressure Ratio table to compensate for pressure if sensor fails)
Overboost (boost fuel cut until boost/throttle decreases)
Fuel pressure (injector flow compensated for variations in pressure, sensor required)
Oil pressure (trigger light or limit RPM if pressure drops below set value, sensor required)
RPM (rev limiter)
Coolant temperature, Temp vs. RPM (fuel and ignition cut, sensor required)
Knock control with feedback
Lean protection (fuel and ignition cut)
REAL-TIME ADVANCED DIAGNOSTICS
The Infinity’s diagnostics software can be configured to constantly monitor signal and current quality to alert the user of a potential issue before it creates the potential for engine damage.
INTERNAL WIDEBAND CONTROLLER
Dual Bosch wideband controllers are built into Infinity-8/10/12 ECUs. This provides highly accurate closed-loop AFR targeting and enables the sensor diagnostics in the ECU to determine the operational condition of the sensor.
LIGHTNING-FAST DATA LOGGING
Infinity’s logging feature supports 2 different file systems. A custom file system option will support 100 channels at up to 1 KHz using a high performance USB flash drive (sold separately). A standard FAT file system will support 10 channels at up to 1KHz, 20 channels at up to 500Hz or 100 channels at up to 200Hz. The Infinity includes a 4GB USB memory stick and the user can replace this with up to 64GB. Additionally, the user can also log direct to the PC at up to 500Hz when connected.
AEMdata DATA ANALYSIS SOFTWARE
AEMdataprovides an advanced interface for viewing the log files generated by the Infinity ECU.
DUAL KNOCK SENSING
Dual knock signal conditioning circuits allow for precise measurements of knock levels. The Infinity can utilize both Piezoelectric and Flat Response type knock sensors.
RELIABILITY
The Infinity ECU is constructed using automotive-rated components designed to withstand the harshest racing environments. Its enclosure and connectors are sealed to make it suitable for engine bay mounting. An advanced wear-leveling strategy for flash memory ensures a lifetime of reliable performance.
COMMUNICATIONS
The Infinity ECU is able to transfer data via USB at up to 480 Mb/second. It features a fully-sealed IP67 communications connection system.
NETWORK INTERFACES
Infinity is AEMnet enabled and will communicate with another AEMnet-equipped device. It is able to output to 3rd party dash/logger devices (not all 3rd party dash/logger devices may be supported). Call AEM technical support at (310) 484-2322 for more information.
INFINITY ECU ADVANCED TUNING PACKAGE
Certain Advanced Tuning functions, hardware outputs and sensor inputs are available for the Infinity Programmable ECU. The Infinity ECU's Advanced Tuning Package is available at no charge for a limited time. Please contact an Authorized AEM dealer or call AEM Performance Electronics at (310) 484-2322 for more info.
INFINITY-8/10/12 EMS CAPABILITIES:
Airflow model based calculations
VE-based engine startup
Multi-fuel capable
Flex fuel compensated – fuel, ignition and boost with blend
Multiple boost control strategies (time, gear, vehicle speed, switch and more)
Drive by wire (with Advanced Tuning Package)
2-step programmable launch control (3-step with Advanced Tuning Package)
Programmable traction control, 2-wheel speed or engine acceleration (4-wheel speed with Advanced Tuning Package)
No-lift shift (Requires Advanced Tuning Package)
User configurable soft-cut rev limiters
User configurable anti-lag
Map switching (4 Separate ignition maps, 4 separate Lambda target maps, 2 separate VE tables)
Single stage wet or dry nitrous control (4-stage with Advanced Tuning Package, coming soon)
Integrated engine protection strategies
Target Lambda table, 10x10
Open-loop fuel pressure compensation
O2 lean-out protection
2-channel adaptive knock control
Configurable coil dwell (RPM, voltage and load based)
Individual cylinder ignition trim (RPM based)
Individual cylinder fuel trim (RPM based)
3D ignition trim maps (coolant and air temp)
Real-time sensor diagnostics
Ignition table, 20x20
VE airflow table, map vs. engine speed, 20x20
User adjustable charge temperature blend (CLT/AIT, engine speed dependent)
Idle control (stepper and pulsewidth)
ADVANCED TUNING PACKAGE:
Advanced Tuning Functions:
No-lift shift
4-wheel speed traction control
3-step launch control
Drive by wire
4-stage nitrous control (coming soon)
Advanced Tuning Hardware Outputs:
1 high side driver
2 H-bridge channels
Advanced Tuning Inputs:
2 analog voltage inputs
2 VR/Mag differential pair inputs
1 digital/frequency input
3 analog temp inputs
http://i405.photobucket.com/albums/pp137/avninder559/20140522_201034-1.jpg
http://i405.photobucket.com/albums/pp137/avninder559/20140522_105405.jpg
text me 559 2104964
located in porterville, ca
paypal only
INFINITY OVERVIEW
The Infinity ECU delivers state-of-the-art electronic fuel injection (EFI) control capabilities typically found only at upper echelons of Motorsports. However, we have now made this technology affordable for both professional race teams and amateur racers. Built around a latest-generation 200MHz automotive processor, the Infinity ECU is capable of processing 400 MIPS (millions of instructions per second) and is perhaps the fastest ECU available today.
For a limited time, all Infinity ECU’s come fully enabled, without the need for feature add-on purchases. Combined with AEM’s industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.
Airflow model based (VE) tuning
ECU Set Up Wizard simplifies start up
Flex fuel compatible
Multi fuel capable
Drive by wire
Variable valve control
Multiple boost control strategies
Nitrous control
Map switching
Dual internal Lambda controllers
Dual knock sensing circuits
Data logging up to 64GB, up to 100 channels at 1KHz
Outputs to 3rd party dashes and data loggers
Industry leading data transfer speed (up to 480Mb/sec)
Integrated engine protection strategies
Sealed enclosure and IP67 rated comms ports
AIRFLOW MODEL BASED CALCULATIONS
Infinity’s airflow model based systems greatly reduce the amount of time it takes to set up and tune an engine by eliminating many of the lookup and trim tables (correction tables) necessary in previous generation ECUs. The Infinity’s airflow based, or volumetric efficiency (VE) based models calculate an engine’s requirements in real time based on an advanced algorithm that has various modes for calculating air flow. Once the user inputs an engine’s basic parameters (displacement, cylinders, ignition type, and firing order) and methods of calculation for airflow and ignition they can begin setting the engine’s VE table in the software.
InfinityTuner USER INTERFACE SOFTWARE
InfinityTuner is optimized for speed and performance. The software has the power to control a multitude of features found in today’s modern racecars, and features an advanced tuning Wizard to reduce set up time. An ECU Setup Wizard takes complex calibration setup work and simplifies it through a smart interface that features tabs for quick set up of vital engine functions. Each tab includes a description of the function.
InfinityTuner software is highly flexible. It allows you to choose from multiple strategies for boost control, idle control, traction control, charge air temp blend, launch control and more.
All controls in the Infinity ECU are synched to logged data which allows users to edit calibration data during log playback to minimize tuning time. AEMdata, AEM’s advanced data logging analysis software is also included for reviewing data logs.
ULTRA-HIGH RESOLUTION FUEL CONTROL
The Infinity ECU calculates injector pulsewidth in units of 1/10th of a microsecond (0.0000001 second). Individual cylinder fuel trim is included and user adjustable.
ACCURATE IGNITION TIMING UNDER ANY CONDITION
InfinityTuner software features a 3D ignition trim map (coolant and air temp based), and its back-end timing code is tested to 100,000 RPM. Individual cylinder ignition trim is included.
FLEX FUEL COMPENSATION
Flex fuel compatibility is included, and the Infinity is able to make automatic adjustments for ethanol content in the fuel with the addition of an ethanol content sensor (sold separately).
MULTI-FUEL CAPABLE
The Infinity has the ability to run two separate fuel types simultaneously through staged fuel injection
DRIVE BY WIRE CAPABILITY
The Infinity-6/8h ECU can control one drive by wire throttle body and includes auto calibration for DBW sensors. It includes idle control, an optional drive by wire rev limiter (for use as a launch limiter, holding limiter or in conjunction with other rev limiters) and necessary failsafes based on redundant sensor inputs. Traction control via drive by wire will be added in the future at no additional cost for existing Infinity ECU owners.
IDLE CONTROL
The Infinity ECU uses a coolant temp based idle control model. It includes an RPM vs. Engine Speed Rate idle decel feature that provides accurate control of the IAC and allows for adjustment of engine braking. The Infinity’s idle TPS offset provides smoother low idle operation when necessary, like driving in the pits or return lane following a pass.
MULTIPLE BOOST CONTROL STRATEGIES
Choose from time, gear, vehicle speed, switch based or other boost control strategies. The Infinity’s boost control includes two 2D base duty tables and two 2D boost target tables. The second tables can be used as a trim, and users can choose from multiple strategies including IAT, MAP, Baro (kpa), throttle %, flex fuel content, boost target and more. Please visit our Forumfor an in depth review of the Infinity’s boost control capabilities.
NITROUS CONTROL
The Infinity’s software allows you to run a single-stage wet or dry nitrous set up (four-stage available soon). This feature includes nitrous timing delay to account for nitrous bleed out, and can be set up for water/methanol injection tuning. Four stage nitrous will be upgraded for free for existing Infinity users when it becomes available.
VARIABLE VALVE CAM CONTROL
Set base duty, limit and VVC cam target for up to four cams through the InfinityTuner Wizard. Users are able to achieve a VVC cam target by setting Cam 1 base timing and base duty cycle % in a 2D table, and the software features a 1D base duty % table that controls the base duty cycle for the VVC output, which is tunable based on the VVC target.
MAP SWITCHING
The Infinity includes up to four separate ignition maps, four separate Lambda maps and two separate VE maps with independent values. Using AEM’s 12 Position Trim Pot, this powerful feature delivers many valuable tuning options including:
Multiple maps for multiple track conditions (practice map, rain map, qualifying map, FTW map)
Change boost target
Change Lambda target
Change ignition target
Tie boost, Lambda and ignition targets together and change them all
Ideal for test mapping during tuning
Change boost base duty
Control PWM switches (like water/methanol injection)
Choose between 2 VE tables for VVC or when restrictors are in place
Blend between flex fuel ignition maps
Blend by cam position and gear
ENGINE PROTECTION
Multiple engine protection strategies are incorporated into the Infinity ECU. Available strategies include:
MAP (create limp mode using Assumed Pressure Ratio table to compensate for pressure if sensor fails)
Overboost (boost fuel cut until boost/throttle decreases)
Fuel pressure (injector flow compensated for variations in pressure, sensor required)
Oil pressure (trigger light or limit RPM if pressure drops below set value, sensor required)
RPM (rev limiter)
Coolant temperature, Temp vs. RPM (fuel and ignition cut, sensor required)
Knock control with feedback
Lean protection (fuel and ignition cut)
REAL-TIME ADVANCED DIAGNOSTICS
The Infinity’s diagnostics software can be configured to constantly monitor signal and current quality to alert the user of a potential issue before it creates the potential for engine damage.
INTERNAL WIDEBAND CONTROLLER
Dual Bosch wideband controllers are built into Infinity-8/10/12 ECUs. This provides highly accurate closed-loop AFR targeting and enables the sensor diagnostics in the ECU to determine the operational condition of the sensor.
LIGHTNING-FAST DATA LOGGING
Infinity’s logging feature supports 2 different file systems. A custom file system option will support 100 channels at up to 1 KHz using a high performance USB flash drive (sold separately). A standard FAT file system will support 10 channels at up to 1KHz, 20 channels at up to 500Hz or 100 channels at up to 200Hz. The Infinity includes a 4GB USB memory stick and the user can replace this with up to 64GB. Additionally, the user can also log direct to the PC at up to 500Hz when connected.
AEMdata DATA ANALYSIS SOFTWARE
AEMdataprovides an advanced interface for viewing the log files generated by the Infinity ECU.
DUAL KNOCK SENSING
Dual knock signal conditioning circuits allow for precise measurements of knock levels. The Infinity can utilize both Piezoelectric and Flat Response type knock sensors.
RELIABILITY
The Infinity ECU is constructed using automotive-rated components designed to withstand the harshest racing environments. Its enclosure and connectors are sealed to make it suitable for engine bay mounting. An advanced wear-leveling strategy for flash memory ensures a lifetime of reliable performance.
COMMUNICATIONS
The Infinity ECU is able to transfer data via USB at up to 480 Mb/second. It features a fully-sealed IP67 communications connection system.
NETWORK INTERFACES
Infinity is AEMnet enabled and will communicate with another AEMnet-equipped device. It is able to output to 3rd party dash/logger devices (not all 3rd party dash/logger devices may be supported). Call AEM technical support at (310) 484-2322 for more information.
INFINITY ECU ADVANCED TUNING PACKAGE
Certain Advanced Tuning functions, hardware outputs and sensor inputs are available for the Infinity Programmable ECU. The Infinity ECU's Advanced Tuning Package is available at no charge for a limited time. Please contact an Authorized AEM dealer or call AEM Performance Electronics at (310) 484-2322 for more info.
INFINITY-8/10/12 EMS CAPABILITIES:
Airflow model based calculations
VE-based engine startup
Multi-fuel capable
Flex fuel compensated – fuel, ignition and boost with blend
Multiple boost control strategies (time, gear, vehicle speed, switch and more)
Drive by wire (with Advanced Tuning Package)
2-step programmable launch control (3-step with Advanced Tuning Package)
Programmable traction control, 2-wheel speed or engine acceleration (4-wheel speed with Advanced Tuning Package)
No-lift shift (Requires Advanced Tuning Package)
User configurable soft-cut rev limiters
User configurable anti-lag
Map switching (4 Separate ignition maps, 4 separate Lambda target maps, 2 separate VE tables)
Single stage wet or dry nitrous control (4-stage with Advanced Tuning Package, coming soon)
Integrated engine protection strategies
Target Lambda table, 10x10
Open-loop fuel pressure compensation
O2 lean-out protection
2-channel adaptive knock control
Configurable coil dwell (RPM, voltage and load based)
Individual cylinder ignition trim (RPM based)
Individual cylinder fuel trim (RPM based)
3D ignition trim maps (coolant and air temp)
Real-time sensor diagnostics
Ignition table, 20x20
VE airflow table, map vs. engine speed, 20x20
User adjustable charge temperature blend (CLT/AIT, engine speed dependent)
Idle control (stepper and pulsewidth)
ADVANCED TUNING PACKAGE:
Advanced Tuning Functions:
No-lift shift
4-wheel speed traction control
3-step launch control
Drive by wire
4-stage nitrous control (coming soon)
Advanced Tuning Hardware Outputs:
1 high side driver
2 H-bridge channels
Advanced Tuning Inputs:
2 analog voltage inputs
2 VR/Mag differential pair inputs
1 digital/frequency input
3 analog temp inputs
http://i405.photobucket.com/albums/pp137/avninder559/20140522_201034-1.jpg
http://i405.photobucket.com/albums/pp137/avninder559/20140522_105405.jpg