Any interest in GM Plug and Play Coil Harnesses?

[WheelWhore]

I make alot of subharnesses for various cars and looking to start playing around with Nissans.

I personally am making a PnP Coil harness for my Rb.


If there is enough interest, I wouldnt mind making them in excess.

Everything would be brand new;

New Connectors
New Pins
New Wire Seals
Nylon Loomed
Dbl Layer Adhesive Heatshrink.


Heres an example of one I make. Injector resistor box for eg/dc/ek.

https://scontent-a-iad.xx.fbcdn.net/hphotos-xaf1/t31.0-8/s720x720/10608745_10154462434140431_1039689767227676468_o.j pg

[NISR20MO]

I'd be interested, mine look like dooky next to the wiring specialties engine harness in my bay. Pricing would likely be the deciding factor. I wish I could say nice work but unfortunately the pic didn't show up for me. Feel free to PM me about pricing :)

[TheRealSy90]

I would be interested in a plug an play harness for chevy LS heatsink coilpacks to sr20det.

[Farzam]

If you're gonna do it for the low, go for it. People in the Nissan game are even stingier than Honda folks.

[white-s13coupe]

I'm interested in a LS coil-pack harness for ka-24de

[WheelWhore]

Pricing would be between $75 and $125. I think that would be a fair price for a brand new harness.

Obviously SR would be slightly cheaper than an RB due to material requirements.

[pacotaco345]

Pricing would be between $75 and $125. I think that would be a fair price for a brand new harness.

Obviously SR would be slightly cheaper than an RB due to material requirements.

I could do around $100 for a plug and play conversion harness for sr.

[WheelWhore]

I wouldnt for see it being any more than that.

I am just gauging interest at the moment. Connectors have been ordered. Just waiting for them to land and start making them.

I need to sit down and look at all the pinouts and connectors on S13/14 SR's and a S1 RB.

[bataangpinoy]

hard part is making the ignitor bypass in such a fashion that its plug and play.

I will start offering complete pnp kits thought my parts shop once a few details and some kinks in the coil pack mounting solution get sorted out..

[WheelWhore]

nice plug there.

[bataangpinoy]

:kiss: different market shares, and target audience.

[az_240]

I know it's been discussed elsewhere but it might help to mention what coil packs to use, why it's better and approximate total cost.

[TheRealSy90]

If you work out a plug and play kit for ls coils on sr20 I've got money with your name on it.

[WheelWhore]

Cool. Challenge accepted. S13 or S14 SR?

[TheRealSy90]

Cool. Challenge accepted. S13 or S14 SR?

s13 redtop sr! :)

[Tracer11lb]

Interested. Have a rb25 s2 in s14 zenki. I have an LS2(car not truck) coils coming in and was going to make one but if your making the harness i would be interested. Planing on mounting the coils in between the fire wall and the passenger strut bar tower. Let me know. Thanks

[redline racer510]

I have a s1 rb25 and if you make a harness that's pnp I will buy it. What about brackets and spark plug wires?

[redline racer510]

Where are you going the get the connector that plugs 8 to the wiring harness on a s1 rb?

[WheelWhore]

Do you have a photo of it? I have only been researching S2 and S14 SR's at the moment.

[WheelWhore]

Well the GM Plugs came in. Should be mocking up the harness this weekend on my S2 RB25.

Awaiting a source on the Black 8 pin RB25 Coilpack Harness Plug and then I will green light the S2 RB25 setup.

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/p526x395/1507603_10154547125195431_5630071968351484352_n.jp g?oh=cb59a0c11e4b20c40d4e3609f739148a&oe=54893895&__gda__=1417879469_7bdb283de27e7f7cb35dffe4ab35635 6

[TheRealSy90]

Any luck with the s13 sr setup?

[RedBaran]

I'm in for rb20

[WheelWhore]

Just need to go outside and get the pinout for the factory coil pack harness (Unless someone has a S2 Coilpack Harness kicking and they want to pinout it out quickly for me. ;) ;) ). Then add that connector and the RB25DET S2 harness will be done. My friend who does my dyno work also agreed to do a before and after on Factory vs. GM Truck Coils. Also looking into a dimple die coil pack cover that these bolt to for a more PnP experience.

Better pictures can be found on Instagram under #clubbedindustries.

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10469077_10154593906150431_5476611421158704799_n.j pg?oh=777264992fa889a83e961771e1809762&oe=54877C94&__gda__=1421890027_839b5786b7f37581654916284351c32 b

[TheRealSy90]

Really needing a plug and play s13 sr - Gm coil setup. I believe it should be the same as s14?