axlegrease
08-09-2014, 12:34 PM
Sup guys, I am parting out my setup because I sold my 240, and therefore, am no longer interested in this. All of the bottom end stuff was machined together as a matching assembly. I would prefer that stuff went together, but I will part it out. Any questions or for more pics. You can text me at 678-973-5541. Make offers people.
- Sr20det red top block, bored 87mm, decked along with a brand new oem oil pump, and crankshaft installed with clevite bearings. $sold
- cp pistons/eagle rods combo. 87mm, 9:1 cr, with clevite bearings. Never installed but I suggest you get new rings for it. $sold$
- arp head studs $120
- real Greddy oil pan, never installed just dirty. $300
- s15 injectors w/ sr20 rail, 480cc. $150
- Tomei head gasket, 87mm bore, 1.0mm thickness $160
- aem ems version 1 w/ serial cable, aem map sensor, boost solenoid and software. $600
- Splitfire ignition system, bnib. $320
- full oem timing rebuild kit. $200
- s13 sr20 into s14 wiring specialties harness, used but excellent condition. $200
- red top cylinder head w/ bc racing springs, retainers, new valves, valve guides, and stock cams. $sold
- full-race turbo manifold, bottom mount, t2 flange. One of the best manifolds I have seen personally. $$ make offers $$
- forced performance 20g turbo, 18cm^2 exhaust housing w/ braided water lines, no oil line. $$ make offers $$
- miscellaneous sr20 stuff, gaskets, stock head parts, Greddy bov, intercoolers, pipes, etc etc.. Ask and $$ make offers $$
Pics will be up shortly. For now text me and I will send whatever u need.
- Sr20det red top block, bored 87mm, decked along with a brand new oem oil pump, and crankshaft installed with clevite bearings. $sold
- cp pistons/eagle rods combo. 87mm, 9:1 cr, with clevite bearings. Never installed but I suggest you get new rings for it. $sold$
- arp head studs $120
- real Greddy oil pan, never installed just dirty. $300
- s15 injectors w/ sr20 rail, 480cc. $150
- Tomei head gasket, 87mm bore, 1.0mm thickness $160
- aem ems version 1 w/ serial cable, aem map sensor, boost solenoid and software. $600
- Splitfire ignition system, bnib. $320
- full oem timing rebuild kit. $200
- s13 sr20 into s14 wiring specialties harness, used but excellent condition. $200
- red top cylinder head w/ bc racing springs, retainers, new valves, valve guides, and stock cams. $sold
- full-race turbo manifold, bottom mount, t2 flange. One of the best manifolds I have seen personally. $$ make offers $$
- forced performance 20g turbo, 18cm^2 exhaust housing w/ braided water lines, no oil line. $$ make offers $$
- miscellaneous sr20 stuff, gaskets, stock head parts, Greddy bov, intercoolers, pipes, etc etc.. Ask and $$ make offers $$
Pics will be up shortly. For now text me and I will send whatever u need.