PDA

View Full Version : CA PBM PRO FLCA/TENROD Combo for S14


ZERTA RACING
08-05-2014, 10:42 PM
Hey everyone I just took these off my DD after 2,000 miles of daily driving 75% freeway 25% around town. They are in great shape but are diss-colored because of something I must have ran over.

Here is the description of the product off of PBM's site:

PRO FLCA/TENROD Combo for S14 knuckles BENT type
$550.00 USD

We are very proud to present the 2012 Parts shop MAX PRO multilink. These new arms and rods are stronger than ever with thick reinforced structures, all Forged critical components, and more thread overlap than anyone else. MAX multilink has been the pioneer in getting more clearance for lowered cars than any other brand for years. You get the adjustability you need to dial in your cars maximum performance. They let you set your personal preferences on characteristics like turn in, grip, tire wear and drift initiation while eliminating OEM rubber bushings for a precision, predictable, tactile DRIVING EXPERIENCE. The quality and design is unmatched by more expensive Japanese brands and the unique design features make them an unbeatable value. The PRO arms and rods feature FORGED Baja 1000 off road spec clamping rod end receivers, adjusters, nuts and even forged rod ends so that you can set it and forget it, constantly tightening your adjustments is a thing of the past. We also have you covered in the future with 4 year free bearing replacement and lifetime warranty. Don't get caught up buying cheaper arms twice, do it once and do it right.

The MAX multilink can be complimented by using or famous Subframe Collars or Subframe Solid Risers, for a perfectly tuned suspension setup.

2012 Parts shop MAX PRO multilink - FLCA - Front Lower Control Arms With Tension Rod Set

~ Up to 35mm wider than S13 or 25mm wider than S14 stock FLCA, up to 390mm from inner to outer joint centers.
~ Lifetime manufacturers defect warranty
~ Thick all steel tubular arm/rod
~ Teflon lined spherical bearings in all 6 joints
~ Forged Clamping rod end receiver
~ Forged Clamping lock nuts make double sure your settings never come loose
~ Forged super long rod ends have the most thread overlap and more adjustability than anything on the market
~ CrMo taper rod with 5mm fine adjustment spacer
~ Integrated tension and lower control arm for much more strength than the OEM style 2 bolt flat bracket connection
~ Bell shaped high surface area pillowball side spacers reinforce subframe mount & give freedom of PB motion
~ Taper wall bearing housing for max misalignment
~ Laser cut double position sway bar bracket & gusseted heavy duty tension rod bracket
~ Copper and Gold plated finish

WE NOW OFFER TWO VERSIONS OF FLCA - BENT OR STRAIGHT
The BEND in the arm has an outer pillowball range of motion thats appropriate for ROLL CENTER CORRECTED KNUCKLES LIKE MAX PRO ANGLE MOD and cars with stock knuckles that have higher ride height or extended track width setting. This is the correct choice for most of our customers.
The STRAIGHT arm version (not pictured below) makes the outer pillowball angle have a good range of motion on cars with a NON-ROLL-CENTER-corrected knuckle on slammed ride height.


I purchased them for 550.00 from PBM direct, they are the Bent type. I am looking to get 400.00 SOLD , no shipping at this time unless your willing to pay for it.

Here are the pictures:
http://i284.photobucket.com/albums/ll32/thomasj51600206/Mobile%20Uploads/0805142000_zpsgr4owcti.jpg
http://i284.photobucket.com/albums/ll32/thomasj51600206/Mobile%20Uploads/0805142000a_zpsp9vf4acx.jpg
http://i284.photobucket.com/albums/ll32/thomasj51600206/Mobile%20Uploads/0805142000b_zps43d0zjvq.jpg
http://i284.photobucket.com/albums/ll32/thomasj51600206/Mobile%20Uploads/0805142000c_zpsus3h1940.jpg
http://i284.photobucket.com/albums/ll32/thomasj51600206/Mobile%20Uploads/0805142056_zpsylg0qknd.jpg

Thanks for looking!

ZERTA RACING
08-05-2014, 11:55 PM
Pm's replied! The spherical's and ball joints are in great shape!

Sent from my VS980 4G using Tapatalk

Maiku240sxS14
08-06-2014, 12:00 AM
Can you still use these if you don't have the..."ROLL CENTER CORRECTED KNUCKLES LIKE MAX PRO ANGLE MOD"...?

ZERTA RACING
08-06-2014, 12:04 AM
Yes, I was running them with my stock knuckles. If your not slammed then these are the correct arms...pbm recommend these for my car.

Sent from my VS980 4G using Tapatalk

hellaslows13
08-06-2014, 09:01 AM
Im assuming if I have the knuckles I will need the straight flcas... Right? If tou are willing to part with the front tension rods I will take those. PM me if you are willing to.

Rak123
08-06-2014, 01:14 PM
Im assuming if I have the knuckles I will need the straight flcas... Right? If tou are willing to part with the front tension rods I will take those. PM me if you are willing to.



If you have roll centre corrected knuckles. You want the bent style

1on1
08-06-2014, 03:29 PM
damn, I need these! free bump for a local.

NISR20MO
08-06-2014, 03:34 PM
Free BUMP, great price. I wish these were for S13 since I already have some for my zenki! I am curious though, why are you selling them? Feel free to PM me.

Im assuming if I have the knuckles I will need the straight flcas... Right? If tou are willing to part with the front tension rods I will take those. PM me if you are willing to.
^^
They would do you no good and he would have incomplete arms. They only work with each other.

ZERTA RACING
08-06-2014, 03:48 PM
I am selling them because my car is a daily.... I went back to my stock FLCA with new moog balljoints and a SPL tension rod. I never plan on drifting my car so the extra angle and adjustable bump stops are not needed in my application. There is nothing wrong with them functionally, they just have the dis-coloration.

Thanks for looking everyone!

hellaslows13
08-06-2014, 03:58 PM
If you have roll centre corrected knuckles. You want the bent style

Thank you, I feel dumb. Seller posted the description in his FS thread with the information.

If you are willing to ship these for your asking price ($400) I will take them. Let me know.

ZERTA RACING
08-07-2014, 02:21 AM
These are now SOLD! thanks for all the interest guys!